PACK OF 100 PIECES
The TC1185-3.0VCT713 is a 3 V 150 mA CMOS Low Dropout Regulator with Shutdown and VREF Bypass, available in SOT-23-5 package.
It is designed specifically for battery-operated systems, the devices’ CMOS construction eliminates wasted ground current, significantly extending battery life.
Features:
Low Supply Current (50 μA, typical)
Low Dropout Voltage
High Output Voltage Accuracy
Standard or Custom Output Voltages
Power-Saving Shutdown Mode
Reference Bypass Input for Ultra Low-Noise Operation
Overcurrent and Overtemperature Protection
Space-Saving 5-Pin SOT-23 Package
Pin-Compatible Upgrades for Bipolar Regulators
Standard Output Voltage Options:1.8V, 2.5V, 2.6V, 2.7V, 2.8V, 2.85V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0
Applications:
Battery Operated Systems
Portable Computers
Medical Instruments
Instrumentation
Cellular/GSM/PHS Phones
Linear Post-Regulators for SMPS
Pagers
PACK OF 70 PIECES
The RN42-I/RM is a small form factor, low power, class 2 Bluetooth radio module offering high performance and easy integration for designers looking to add wireless capability to their products. It is designed by Microchip Technology and is one of the professional series Bluetooth modules in their product line.
Here are some of the key features and specifications for the RN42-I/RM:
Bluetooth Technology: It is based on Bluetooth 2.1 + EDR (Enhanced Data Rate) standard, offering a secure and stable wireless communication protocol.
Class 2 Module: As a Class 2 Bluetooth module, it provides a standard communication range of up to 30 feet (10 meters).
Low Power Consumption: The module is optimized for low power consumption, making it suitable for battery-powered applications.
Easy Integration: The RN42-I/RM supports multiple interface protocols, including UART, SPI, and I2C, allowing for straightforward integration with microcontrollers and other digital systems.
High Data Rates: It can support data rates up to 3 Mbps, enabling high-speed wireless data transfer.
Profiles and Protocols: The module comes with built-in support for multiple Bluetooth profiles such as SPP (Serial Port Profile) and can be configured to support others as required.
Compact Size: With its small footprint, the module can be easily fitted into space-constrained applications.
Robust Firmware: It is equipped with robust firmware that simplifies configuration and enhances functionality, often allowing for the module to be used with simple AT commands for setup.
Certifications: The RN42-I/RM is typically certified for FCC, CE, and other regulatory approvals, reducing the compliance burden for product developers.
Versatility: It is designed for a wide range of applications in the medical, industrial, automotive, and consumer markets where reliable wireless communication is essential.
Developers often choose the RN42-I/RM for its mix of high performance, ease of use, and flexibility, making it a go-to component for adding Bluetooth connectivity to a diverse array of electronic products.
COST PER PIECE
The PIC24FJ64GA002-I is a high-performance microcontroller packaged in a 28-pin SPDIP (Skinny Plastic Dual In-line Package). It features 64KB of flash memory, 8192 bytes of RAM, and is capable of executing up to 16 Million Instructions Per Second (16 MIPS). This microcontroller is well-suited for a wide range of applications requiring a balance between processing power, memory size, and physical compactness.
Key Features and Benefits:
64KB Flash Memory: Provides ample space for program storage, making it suitable for complex applications that require large codebases or data storage.
8192 Bytes of RAM: Offers sufficient RAM for data processing and temporary data storage, facilitating smooth and efficient operation of applications.
High-Speed Processing (16 MIPS): With a processing speed of up to 16 MIPS, this microcontroller can handle demanding tasks and execute instructions quickly, making it suitable for high-performance applications.
28-SPDIP Package: The 28-pin SPDIP format provides a convenient and compact package, ideal for breadboard prototyping and for use in space-constrained applications.
Versatile Applications: This microcontroller can be used in a variety of applications, including automation systems, consumer electronics, robotics, and Internet of Things (IoT) devices.
Model (PIC24FJ64GA002-I): The specific model number ensures easy identification and procurement, allowing designers and engineers to select the appropriate microcontroller for their projects.
In summary, the PIC24FJ64GA002-I microcontroller, with its robust memory capacity, high-speed processing, and compact packaging, is a versatile and powerful solution for a wide range of advanced electronic applications. Its combination of performance and size makes it an excellent choice for both hobbyist and professional projects.
PACK OF 1200 PIECES
Direct LCD Panel Drive Capability:
Can drive LCD panel while in Sleep modeUp to 48 Segments and 192 Pixels, Software SelectableProgrammable LCD Timing module:Multiple LCD timing sources availableUp to four commons: static, 1/2, 1/3 or 1/4 multiplexStatic, 1/2 or 1/3 bias configurationOn-Chip LCD Boost Voltage Regulator for Contrast ControlCharge Time Measurement Unit (CTMU) for Capacitive Touch SensingADC for Resistive Touch Sensing10,000 Erase/Write Cycle Flash Program Memory, TypicalFlash Retention 20 Years, MinimumSelf-Programmable under Software ControlWord Write Capability for Flash Program Memory for Data EEPROM EmulatorsPriority Levels for Interrupts8 x 8 Single-Cycle Hardware MultiplierExtended Watchdog Timer (WDT):Programmable period from 4 ms to 131sIn-Circuit Serial Programming™ (ICSP™) via Two PinsIn-Circuit Debug via Two PinsOperating Voltage Range: 2.0V to 3.6V5.5V Tolerant Input (digital pins only)Selectable Open-Drain Configuration for Serial Communication and CCP Pins for Driving Outputs up to 5VOn-Chip 2.5V RegulatorTape and Reel Packaging
Technical Attributes
Description
Value
Device Core
PIC
IC Case / Package
TQFP
IC Mounting
Surface Mount
Interfaces
I2C/SPI/USART
No. of I/Os
51
No. of Pins
64
Operating Frequency Max
48
Operating Temperature Max
85
Operating Temperature Min
-40
Program Memory Size
64 KB
Supply Voltage Max
2.7
Supply Voltage Min
1.7
COST PER PIECE
The PIC18F45K50-I/P is a high-performance PIC18 family 8-bit powerful (200 nanosecond instruction execution) yet easy-to-program CMOS flash based Microcontroller packs powerful PIC®(RISC) architecture with up to 16 MIPS of processing power with benchmark nanoWatt XLP extreme low power consumption. This product offer all of the advantages of the well recognized high-performance x16 architecture with standardized features including 32kB of addressable program memory size, 2048bytes of data memory size, 36 general-purpose I/O pins, two comparators, 25-channel 10-bit analog-to-digital (A/D) converter and one 5-bit digital-to-analog (D/A) converter. This device operates at a maximum frequency of 48MHz wide operating voltage of 1.8 to 5.5V.
83 (16-bit wide) powerful C-optimized
32 level hardware stack
1 (8-bit) file select register
Integrated 8x8 hardware multiply
Programmable brown-out reset (BOR)
Programmable low voltage detection
16MHz internal oscillator
Watch dog timer (WDT)
Internal voltage reference (Bandgap)
Charge time measurement unit (CTMU)
Two 8-bit digital timers
Two 16-bit digital timers
1x Enhanced Capture/Compare/PWM (ECCP)
full-speed USB 2.0
25x Capacitive touch channels
In-Circuit Serial Programming™ (ICSP™)
256bytes of EEPROM data memory
Applications:
Industrial, Automotive, Consumer Electronics, Motor Drive & Control, Lighting, Medical, Security
Warnings:
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
COST PER PIECE
The PIC18F4550-I/P offers high computational performance with the addition of high endurance and enhanced flash program memory. In addition to these features, the PIC18F4550-I/P introduces design enhancements that make these microcontrollers a logical choice for many high performance, power sensitive applications.
Full Speed USB 2.0 (12Mbit/s) interface
1K byte dual port RAM + 1K byte GP RAM
Full speed transceiver
16 endpoints (IN/OUT)
Streaming port
Internal pull up resistors (D+/D-)
48MHz performance (12 MIPS)
Applications:
Automation & Process Control, Communications & Networking, Consumer Electronics, Embedded Design & Development, Multimedia, Portable Devices, Robotics, Sensing & Instrumentation, Security
COST PER PIECE
Microchip’s 8-bit PIC microcontrollers fall into three product architecture categories providing a variety of options for any application requirement. The specific families include: Baseline – PIC10F and some PIC12F and PIC16F; Mid-Range PIC12F and PIC16F; and High Performance – PIC18F. All device families have low power capability, flexible Flash program memory, and separate instruction and data buses to enable single cycle execution.
Features:
CPU:
Up to 10 MIPS performance
C compiler optimized RISC architecture
8 x 8 Single Cycle Hardware Multiply
System:
Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
Fail-Safe Clock Monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
Wide operating Voltage range; 2.0 V to 5.5 V
NanoWatt Power Managed Modes:
Run, Idle and Sleep modes
Idle mode currents down to 5.8 uA typical
Sleep mode currents down to 0.1 uA typical
Analog Features:
10-bit ADC, 13 channels
100K samples per second
Programmable Low Voltage Detection Module
Programmable Brown-out Reset module
Two Analog comparators with input multiplexing
EUSART module including LIN bus support
Four Timer Modules
Up to 5 PWM outputs
Up to 2 Capture / Compare
COST PER PIECE
Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers, with a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, complete technical documentation and post design-in support through a global sales and distribution network. 16-bit PIC Microcontrollers & dsPIC Digital Signal Controllers. Microchip offers two 16-bit Microcontroller (MCU) families plus two 16-bit Digital Signal Controller (DSC) families that give you compatible options across a wide spectrum of price, performance and feature sets.
Features:
CPU:
Up to 10 MIPS performance
C compiler optimized RISC architecture
8 x 8 Single Cycle Hardware Multiply
System:
Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
Fail-Safe Clock Monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
Wide operating Voltage range; 2.0 V to 5.5 V
NanoWatt Power Managed Modes:
Run, Idle and Sleep modes
Idle mode currents down to 5.8 uA typical
Sleep mode currents down to 0.1 uA typical
Analog Features:
10-bit ADC, 13 channels
100K samples per second
Programmable Low Voltage Detection Module
Programmable Brown-out Reset module
Two Analog comparators with input multiplexing
EUSART module including LIN bus support
Four Timer Modules
Up to 5 PWM outputs
Up to 2 Capture / Compare
COST PER PIECE
The PIC18F26K80-I/SO is a 3648 B RAM 64 kB flash, high-performance 8-bit microcontroller. This device is ideal for applications requiring cost-effective, low-power CAN solutions with high performance and robust peripheral set in small package.It has low sleep current for low power applications and 1.8 V to 5.5 V operating voltage for automotive, building control, elevator control and industrial applications. Timers/enhanced compare/capture/PWMs for precision timing control, 12-bit ADC for advance analog interface.
Features:
20 nA sleep mode300 nA watch dog timer operation in Sleep modesIntegrated ECAN conforming to CAN 2.0 B active specificationExtreme low power sleep mode ideal for battery applicationsCharge time measurement unit supports touch sensing and advanced sensing applications12-bit ADC
COST PER PIECE
The PIC18F26K22-I/SP is a low-power and high performance 8-bit Microcontroller with XLP Technology. Available in through hole SPDIP-28 package.
Features:
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Extreme Low-Power Management with nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHz
Flexible Oscillator Structure
Precision 16 MHz internal oscillator block
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Two-Speed Oscillator Start-up
Special Microcontroller Features:
Full 5.5V operation
Low voltage option available for 1.8V-3.6V operation
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Programmable Brown-out Reset (BOR)
Analog Features:
Analog-to-Digital Converter (ADC) module : 10-bit Resolution
Programmable High/Low Voltage Detection (PLVD) module
Charge Time Measurement Unit (CTMU) for mTouch™ support
Analog comparator module
Voltage reference module
Peripheral Features:
24/35 I/O pins and 1 input-only pin
Three external interrupt pins
Up to seven Timer modules
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM (ECCP) modules
Two Master Synchronous Serial Port (MSSP) modules
Two Enhanced Universal Synchronous Asynchronous Receiver Transmitter modules (EUSART)
COST PER PIECE
The PIC18F25K50-I/SP is a high-performance PIC18 family 8-bit powerful (200 nanosecond instruction execution) yet easy-to-program CMOS flash based Microcontroller packs powerful PIC®(RISC) architecture with up to 16 MIPS of processing power with benchmark nanoWatt XLP extreme low power consumption. This product offer all of the advantages of the well recognized high-performance x16 architecture with standardized features including 32kB of addressable program memory size, 2048bytes of data memory size, 25 general-purpose I/O pins, two comparators, 14-channel 10-bit analog-to-digital (A/D) converter and one 5-bit digital-to-analog (D/A) converter. This device operates at a maximum frequency of 48MHz wide operating voltage of 1.8 to 5.5V.
83 (16-bit wide) powerful C-optimized
32 level hardware stack
1 (8-bit) file select register
Integrated 8x8 hardware multiply
Programmable brown-out reset (BOR)
Programmable low voltage detection
16MHz internal oscillator
Watch dog timer (WDT)
Internal voltage reference (Bandgap)
Charge time measurement unit (CTMU)
Two 8-bit digital timers
Two 16-bit digital timers
1x Capture/Compare/PWM (CCP)
1x Enhanced Capture/Compare/PWM (ECCP)
full-speed USB 2.0
Local interconnect network (LIN)
14x Capacitive touch channels
In-Circuit Serial Programming™ (ICSP™)
256bytes of EEPROM data memory
Applications:
Industrial, Automotive, Consumer Electronics, Motor Drive & Control, Lighting, Medical, Security
Warnings:
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
COST PER PIECE
PIC18F2520-I/SP is a 8-bit Microcontroller has 32 KBytes of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 40 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin PDIP package. It has an industrial temperature ranges from (-40°C to +85°C).PIC18F2520 is ideal for applications requiring cost-effective, low-power solutions with a robust peripheral set in a small package. PIC18F having low power, high performance 8-bit MCU with integrated full-speed USB 2.0 and peripheral flexibility.
Features:
CPU:Up to 10 MIPS performanceC compiler optimized RISC architecture8 x 8 Single Cycle Hardware MultiplySystem:Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLLFail-Safe Clock Monitor – allows safe shutdown if clock failsWatchdog Timer with separate RC oscillatorWide operating Voltage range; 2.0 V to 5.5 VNanoWatt Power Managed Modes:Run, Idle and Sleep modesIdle mode currents down to 5.8 uA typicalSleep mode currents down to 0.1 uA typicalAnalog Features: 10-bit ADC, 13 channels100K samples per secondProgrammable Low Voltage Detection ModuleProgrammable Brown-out Reset moduleTwo Analog comparators with input multiplexingEUSART module including LIN bus supportFour Timer ModulesUp to 5 PWM outputsUp to 2 Capture / Compare / PWM(CCP) module
COST PER PIECE
This device features a full speed USB 2.0 compliant interface that can automatically change clock sources and power levels upon connection to a host, making it an exceptional device for battery-powered applications.
Features:
C Compiler optimized architecture
Self-programmable under software control
Support for Interrupt Priority Levels
8x8 Single-Cycle Hardware Multiplier
Enhanced Watchdog Timer with a programmable period
USB v2.0 compliant interface
Automatic detection of physical connection to USB host
256-byte Dual Access RAM
Can be internally clocked up to 48 MHz
Dual Capture/Compare/PWM interfaces
Up to 5 PWM Outputs
Master I2C/SPI Interface
Supports all modes of 3-wire SPI
Enhanced Addressable USART Module
Supports RS-485, RS-232, and LIN 2.0
1.8 to 5.6V Operating Range
Software Programmable Brown-out Reset feature
Four power-managed operating modes
Two-speed clock startup option
COST PER PIECE
The PIC18F14K22-I/SO is a 8-bit Microcontroller has 16 Kbytes of Flash Program Memory in a 20 Pin SOIC package. It has an industrial temperature ranges from (-40°C to +85°C). The PIC18F1XK22 family devices offer all of the advantages of the well recognized PIC18F High Performance MCUs; 8-bit, C compiler optimized architecture and an industry leading peripheral set now available in a low pin-count option.
Features:
C Compiler optimized architecture256 bytes data EEPROMLinear program memory addressing to 16 KbytesLinear data memory addressing to 512 bytesExtreme Low-Power ManagementPIC18LF1XK22 with nanoWatt XLP™ TechnologySleep mode: 50 nA, typicalWatchdog Timer: 600 nA, typicalTwo-Speed Oscillator Start-upOperating voltage 1.8 V- 5.5 VSelf-reprogrammable under software control
COST PER PIECE
The PIC18F1320-I/P is a part of PIC18F series 8-bit Microcontroller. It has 8 Kbytes of Flash Program Memory in a 18 Pin PDIP package. It has an industrial temperature ranges from -40°C to +85°C.The PIC18F1320 microcontroller has nanoWatt Technology, which features six enhanced power-managed "software controlled" modes, power consumption as low as 0.1 microamps in standby mode and a wide operating voltage range from 2 to 5.5 volts which makes this device ideal for battery managed applications. This device also encompasses a new low-current watchdog timer, a 2-speed start-up from a reset or sleep mode and a new fail-safe clock monitor that is used to detect an external clock failure.
Features:
'C'compiler friendly development environment128 bytes of EEPROMSelf-programming, an ICDcapture/compare/PWM functions7 channels of 10-bit Analog-to-Digital (A/D) converterAddressable Universal Asynchronous Receiver Transmitter (AUSART)Internal OscillatorSelf Programming
COST PER PIECE
PIC18F1220-I/SO is a 8-bit Microcontroller has 4 Kbytes of Flash Program Memory in a 18 Pin SOIC package. It has an industrial temperature ranges from (-40°C to +85°C).
PIC18F1220 microcontroller has nanoWatt Technology, which features six enhanced power-managed "software controlled" modes, power consumption as low as 0.1 microamps in standby mode and a wide operating voltage range from 2 to 5.5 volts which makes this device ideal for battery managed applications. This device also encompasses a new low-current watchdog timer, a 2-speed start-up from a reset or sleep mode and a new fail-safe clock monitor that is used to detect an external clock failure.
Features:
'C'compiler friendly development environment
Self-programming, an ICD
capture/compare/PWM functions
7 channels of 10-bit Analog-to-Digital (A/D) converter
Addressable Universal Asynchronous Receiver Transmitter (AUSART)
Internal Oscillator
Self Programming
COST PER PIECE
The PIC16F913-I/SP 8-bit Microcontroller has 7 K of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin PDIP package. It has an industrial temperature range of -40°C to +85°C and is lead free.The PIC16F913-I/SP 13-bit program counter capable of addressing a 4 k x 14 program memory space for the PIC16F913/914 (0000h-0FFFh) and an 8 k x 14 program memory space for the PIC16F916/917 (0000h-1FFFh). Accessing a location above the memory boundaries for the PIC16F913 and PIC16F914 will cause a wrap around within the first 4 k x 14 space. The Reset vector is at 0000h and the interrupt vector is at 0004h.
Features:
Up to 60 LCD segments7 KB Flash Program Memory256 B Data EEPROMInternal 32 kHz to 8 MHz oscillatorLow-power nanoWatt Technology25 mA Source/Sink current I/OTwo 8-bit Timer (TMR0/TMR2)One 16-bit Timer (TMR1)Extended Watchdog Timer (EWDT)Wide Operating Voltage (2.0 V – 5.5 V)Brown-Out Reset (BOR) with Software ControlIn Circuit Serial Programming (ICSP)Programmable Low Voltage Detect (PLVD)Wake on changeI2C, SPI, AUSART
COST PER PIECE
The PIC16F887-I/P 8-bit Microcontroller has 14 K of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin SSOP package. It has an industrial temperature range of -40°C to +85°C and is lead free.This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package. The PIC16F882 features 128 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART).
Features:
Precision Internal Oscillator:Factory calibrated to ±1%Software selectable frequency range of 8 MHz to 32 kHzSoftware tunableTwo-Speed Start-Up modeFail-safe clock monitoring for critical applicationsClock mode switching during operation for low-power operationPower-Saving Sleep modePower-on Reset (POR)Selectable Brown-out Reset (BOR) voltageExtended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operationIn-Circuit Serial Programming™ (ICSP™) via two pinsIn-Circuit Debug (ICD) via two pinsSelf-reprogrammable under software controlProgrammable code protectionCapture/Compare/PWM (CCP) moduleEnhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steeringMaster Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
Applications:
Analog/integrated level applicationsAutomotiveIndustrialAppliancesConsumer applications
COST PER PIECE
Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers.The 8-bit PIC® microcontroller solutions feature a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, comprehensive application notes, complete technical documentation and post design-in support through a worldwide sales and distribution network. Microchip is committed to easy migration across product families, providing seamless program memory expansion, pin compatibility, and a unified development environment for all products.This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F886 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.The PIC16F886-I/SP 8-bit Microcontroller has 14 K of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin PDIP package. It has an industrial temperature range of -40°C to +85°C and is lead free.
Features:
Precision Internal Oscillator:Factory calibrated to ±1%.Software selectable frequency range of 8 MHz to 32 kHz.Software tunable.Two-Speed Start-Up mode.Fail-safe clock monitoring for criticalapplications.Clock mode switching during operation for low-power operation.Power-Saving Sleep mode.Power-on Reset (POR).Selectable Brown-out Reset (BOR) voltage.Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation.In-Circuit Serial Programming™ (ICSP™) via two pins.In-Circuit Debug (ICD) via two pins.High-endurance Flash/EEPROM cell:100,000 erase/write cycle enhanced Flash program memory, typica.1,000,000 erase/write cycle data EEPROM memory, typical.Data EEPROM retention > 40 years.Self-reprogrammable under software control.Programmable code protection.
COST PER PIECE
The PIC16F886 series of 8-bit Microcontroller has 7 K of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin SOIC package. It has an industrial temperature range of -40°C to +85°C and is lead free.This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F882 features 128 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART).
Features:
Precision Internal Oscillator:Factory calibrated to ±1%Software selectable frequency range of 8 MHz to 32 kHzSoftware tunableTwo-Speed Start-Up modeFail-safe clock monitoring for critical applicationsClock mode switching during operation for low-power operationPower-Saving Sleep modePower-on Reset (POR)Selectable Brown-out Reset (BOR) voltageExtended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operationIn-Circuit Serial Programming™ (ICSP™) via two pinsIn-Circuit Debug (ICD) via two pinsSelf-reprogrammable under software controlProgrammable code protectionCapture/Compare/PWM (CCP) moduleEnhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steeringMaster Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
Applications:
Analog/integrated level applicationsAutomotiveIndustrialAppliancesConsumer applications
COST PER PIECE
The PIC16F883 series of 8-bit Microcontroller has 7 K of Flash Program Memory with 25 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin SOIC package. It has an industrial temperature range of -40°C to +85°C and is lead free.This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F882 features 128 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART).
Features:
Precision Internal Oscillator:Factory calibrated to ±1%Software selectable frequency range of 8 MHz to 32 kHzSoftware tunableTwo-Speed Start-Up modeFail-safe clock monitoring for critical applicationsClock mode switching during operation for low-power operationPower-Saving Sleep modePower-on Reset (POR)Selectable Brown-out Reset (BOR) voltageExtended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operationIn-Circuit Serial Programming™ (ICSP™) via two pinsIn-Circuit Debug (ICD) via two pinsSelf-reprogrammable under software controlProgrammable code protectionCapture/Compare/PWM (CCP) moduleEnhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steeringMaster Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
Applications:
Analog/integrated level applicationsAutomotiveIndustrialAppliancesConsumer applications
COST PER PIECE
The PIC16F882-I/SP is a 8-bit CMOS Flash-based Microcontroller. The microcontroller features 128 bytes of EEPROM data memory, self programming, an ICD, 2 comparators, 11 channels of 10-bit Analogue-to-digital (A/D) converter, 1 capture/compare/PWM and 1 enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). The PIC16F882 devices have two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 64ms (nominal) on power-up only, designed to keep the part in reset while the power supply stabilizes.High-performance RISC CPUPower-saving sleep modePower-on reset (POR)Extended watchdog timer (WDT) with its own on-chip RC oscillator for reliable operationIn-Circuit Serial Programming™ (ICSP™) via two pinsIn-Circuit Debug (ICD) via two pinsSelf-reprogrammable under software controlProgrammable code protectionEnhanced capture/compare/PWM (ECCP) module with auto-shutdown and PWM steeringMultiplexed master clear with pull-up/input pin
Applications:
Automotive, Industrial, Consumer ElectronicsWarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
COST PER PIECE
The PIC16F877A series of 8-bit Microcontroller has 7 K of Flash Program Memory with 33 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 44-Pin TQFP package. It has an extended temperature range of -40°C to +125°C and is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. PIC16F877 features 256 bytes of EEPROM data memory, self programming, an ICD, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 additional timers, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more.
Features:
Precision Internal Oscillator:Factory calibrated to ±1%Software selectable frequency range of 8 MHz to 32 kHzSoftware tunableTwo-Speed Start-Up modeFail-safe clock monitoring for critical applicationsClock mode switching during operation for low-power operationPower-Saving Sleep modePower-on Reset (POR)Selectable Brown-out Reset (BOR) voltageExtended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operationIn-Circuit Serial Programming™ (ICSP™) via two pinsIn-Circuit Debug (ICD) via two pinsHigh-endurance Flash/EEPROM cell:100,000 erase/write cycle enhanced Flash program memory, typical1,000,000 erase/write cycle data EEPROM memory, typicalData EEPROM retention > 40 yearsSelf-reprogrammable under software controlProgrammable code protection
Applications:
Advanced level A/D applicationsAutomotiveIndustrialAppliancesConsumer applications.
COST PER PIECE
The PIC16F873A series 8-bit Microcontroller has 7 K of Flash Program Memory with 22 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin QFN package. It has an industrial temperature range of -40°C to +85°C and is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 28-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F873A features 128 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 5 channels of 10-bit Analog-to-Digital (A/D) converter, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more.
Features:
2 PWM 10-bit128 Bytes EEPROM data memoryICD25 mA sink/source per I/OSelf Programming
Applications:
Advanced level A/D applicationsAutomotiveIndustrialAppliancesConsumer applications
COST PER PIECE
The PIC16F872-I/SP 8-bit Microcontroller has 3.5 K of Flash Program Memory with 22 I/O's. It's maximum CPU speed is 20 MHz with an operating voltage range of 2 V - 5.5 V in a 28-Pin PDIP package. It has an industrial temperature range of -40°C to +85°C and is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 28-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F872 features 64 bytes of EEPROM data memory, self programming, an ICD, 5 channels of 10-bit Analog-to-Digital (A/D) converter, 2 additional timers, a capture/compare/PWM functions and the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus.
Features:
1 PWM 10-bit64 Bytes EEPROM data memoryICD25 mA sink/source per I/OSelf Programming
Applications:
advanced level A/D applicationAutomotiveIndustrialAppliancesConsumer applications
COST PER PIECE
This powerful 200ns instruction execution yet easy-to-program CMOS Flash/EEPROM-based 8-bit microcontroller packs Microchip's powerful PIC architecture into an 18-pin package.
The same device can be used for prototyping and production and the end application can be easily updated without removing the device from the end product via the ICSP.
Only 35 single word instructions to learn, all instructions single-cycle except for program branches which are two-cycle, 14-bit wide instruction words, 8-bit wide data bytes, 15 special function hardware registers, eight-level deep hardware stack, direct, indirect and relative addressing modes.
Easily adapted for automotive, industrial, appliances low power remote sensors, electronic locks and security applications.
Supply voltage 2V to 6V
Flash memory 1.75KB
EEPROM memory 64Bytes
SRAM data memory 68Bytes
13 I/O pins
1 timer
Clock speed 4MHz
18-DIP case
Family
PIC16F84A
Clock Speed
4MHz
EEPROM Memory
64Bytes
SRAM Data Memory
68Bytes
Flash Memory
1.75KB
Supply Voltage
2 to 5.5V
Package/Case
DIL-18
COST PER PIECE
The PIC16F819 features 8MHz internal oscillator, 256 bytes of EEPROM data memory, a capture/compare/PWM, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and 5 channels of 10-bit Analog-to-Digital (A/D) converter that make it ideal for advantage analog / integrated level applications.This powerful (200 nanosecond instruction execution) yet easy–to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into an 18-pin package and is upwards compatible with the PIC16C7x, PIC16C62xA, PIC16C5X and PIC12CXXX devices.
Features:
1 PWM 10-bit8 MHz Internal OscillatorICD256 bytes of EEPROM data memoryCapture/Compare
Applications:
AutomotiveIndustrialAppliances Consumer applications.
COST PER PIECE
The PIC16F716-I/P is a 8-bit Flash-based Microcontroller. This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS flash-based microcontroller is upwards compatible with the PIC16C5X and PIC12FXXX devices. The PIC16F716 features 4 channels of 8-bit Analogue-to-digital (A/D) converter with 2 additional timers and a enhanced capture/compare/PWM function. The Analogue-to-digital Converter (ADC) allows conversion of an analogue input signal to a 8-bit binary representation of that signal. This device uses analogue inputs, which are multiplexed into a single sample and hold circuit. The output of the sample and hold is connected to the input of the converter. The converter generates a 8-bit binary result via successive approximation and stores the conversion result into the ADC result register (ADRES).High-performance RISC CPUPower-on reset (POR)Power-up timer (PWRT) and oscillator start-up timer (OST)Watchdog timer (WDT) with its own on-chip RC oscillator for reliable operationProgrammable code protectionPower-saving sleep modeFully static designIn-Circuit Serial Programming™ (ICSP™) capability-40 to +85°C Temperature range (industrial)
Applications:
Automotive, Industrial, Consumer ElectronicsWarningsESD sensitive device, take proper precaution while handling the device. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
COST PER PIECE
The PIC16F630-I/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +125°C and has 14 pin in PDIP package. This device is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture into a 14-pin package and features 1 comparator and 128 bytes of EEPROM data memory.This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.
Features:
High-Performance RISC CPU:Only 35 Instructions to LearnAll single-cycle instructions except branchesOperating Speed:DC – 20 MHz oscillator/clock inputDC – 200 ns instruction cycleSpecial Microcontroller Features:Internal and External Oscillator OptionsPrecision Internal 4 MHz oscillator factory calibrated to ±1%External Oscillator support for crystals and resonators5 μs wake-up from Sleep, 3.0 V, typicalPower-Saving Sleep modeWide Operating Voltage Range – 2.0 V to 5.5 VPeripheral Features:12 I/O Pins with Individual Direction ControlHigh Current Sink/Source for Direct LED DriveAnalog Comparator module with:One analog comparatorProgrammable on-chip comparator voltage reference (CVREF) moduleProgrammable input multiplexing from device inputsComparator output is externally accessible
COST PER PIECE
The PIC16F628A-I/P is an 18 pin, flash based, 8 bit microcontroller. This device employs an advanced RISC architecture. The PIC16F628A-I/P has enhanced core features, an eight level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14 bit wide instruction word with the separate 8 bit wide data. The two stage instruction pipeline allows all instructions to execute in a single cycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available, complemented by a large register set.Interrupt Capability8 level deep hardware stackDirect, indirect, and relative addressing modesInternal and external oscillator optionsPower saving sleep modeProgrammable weak pull-ups on PORTBMultiplexed master clear/input pinWatchdog timer with independent oscillator for reliable operationLow voltage programmingIn circuit serial programmingProgrammable code protectionBrown-out ResetPower-on ResetPower-up timer and Oscillator start-up timer1,000,000 write EEPROM endurance40 year data retentionDual speed internal oscillatorRun-time selectable between 4MHz and 48kHz4µs wake-up from Sleep, 3.0V, typ.16 I/O pins with individual direction control
Applications:
Clock & Timing, Embedded Design & Development, Imaging, Video & Vision, Industrial, Motor Drive & Control, Multimedia, Portable Devices, Sensing & Instrumentation, Wireless
COST PER PIECE
The PIC16F627A-I/P is a 8-bit fully-static Flash-based CMOS Microcontroller. The PIC16F627A features 4MHz internal oscillator, 128 bytes of EEPROM data memory, a capture/compare/PWM, a USART, 2 comparators and a programmable voltage reference. The PIC16F627A have enhanced core features, an eight-level deep stack and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with the separate 8-bit wide data. The two-stage instruction pipeline allows all instructions to execute in a single cycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available, complemented by a large register set. The PIC16F627A device have integrated features to reduce external components, enhancing system reliability and reducing power consumption. The PIC16F62X series fits in applications ranging from battery chargers to low power remote sensors.Low voltage programmingLow speed clock mode4MHz Internal oscillatorOn-chip voltage referencePower-saving sleep modeProgrammable weak pull-ups on port-BMultiplexed master clear/input-pinWatchdog timer with independent oscillator for reliable operationLow-voltage programmingIn-Circuit Serial Programming™ (via two pins)Programmable code protectionBrown-out reset and power-on resetPower-up timer and oscillator start-up timerIndustrial and extended temperature rangeSupplier's original packaging: Tube
Applications:
Power Management, Sensing & Instrumentation, Automotive, Industrial, Consumer ElectronicsWarningsESD sensitive device, take proper precaution while handling the device. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
COST PER PIECE
PIC16F627-04/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +85°C and has 18 pin in PDIP package. This device is lead free.The high performance of the PIC16F62X family can be attributed to a number of architectural features commonly found in RISC microprocessors. To begin with, the PIC16F62X uses a Harvard architecture, in which, program and data are accessed from separate memories using separate buses. This improves bandwidth over traditional Von Neumann architecture where program and data are fetched from the same memory.Separating program and data memory further allows instructions to be sized differently than 8-bit wide data word. Instruction opcodes are 14-bits wide making it possible to have all single-word instructions.
Features:
Low voltage programminglow speed Clock modeProgrammable BOR4 MHz internal RC oscillatoron-chip voltage reference128 bytes of EEPROM Data Memory
COST PER PIECE
PIC16F616-I/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +150°C and has 14 pin in PDIP package. This device is lead free.
Features:
Flash Program MemoryInternal 4/8 MHz oscillatorComparator with hysterisis (user configurable)Mid-Range core with 35 Instruction, 8 Stack Levels25 mA Source/Sink current I/OTwo 8-bit Timer (TMR0/TMR2)One 16-bit Timer (TMR1)Watchdog Timer (WDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)Enhanced Capture Compare PWM (Pulse Width Modulation)Wide Operating Voltage (2.0 V – 5.5 V)High Voltage PIC16HV616 variant (2.0 V – User Defined) with internal shunt regulator
COST PER PIECE
PIC16F57-I/SP is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +125°C and has 28 pin in SPDIP package. This device is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit microcontroller packs Microchip’s powerful PICmicro® architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
Features:
28-pin packagingBaseline Core with 33 Instructions, 2 Stack LevelsAll single-cycle Instructions except for program branches which are two cycles12-bit wide instructions8-bit wide data path25 mA source/sink current I/OLow power (100 nA) sleep currentOne 8-bit timer (TMR0)Watchdog timer (WDT)In-Circuit Serial Programming™In-Circuit debugging supportProgrammable code protection
COST PER PIECE
PIC16F57-I/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +125°C and has 28 pin in PDIP package. This device is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit microcontroller packs Microchip’s powerful PICmicro® architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
Features:
28-pin packagingBaseline Core with 33 Instructions, 2 Stack LevelsAll single-cycle Instructions except for program branches which are two cycles12-bit wide instructions8-bit wide data path25 mA source/sink current I/OLow power (100 nA) sleep currentOne 8-bit timer (TMR0)Watchdog timer (WDT)In-Circuit Serial Programming™In-Circuit debugging supportProgrammable code protection
COST PER PIECE
PIC16F54-I/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +125°C and has 18 pin in PDIP package. This device is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit microcontroller packs Microchip’s powerful PICmicro® architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
Features:
18-pin packagingBaseline Core with 33 Instructions, 2 Stack LevelsAll single-cycle Instructions except for program branches which are two cycles12-bit wide instructions8-bit wide data path25 mA source/sink current I/OLow power (100 nA) sleep currentOne 8-bit timer (TMR0)Watchdog timer (WDT)In-Circuit Serial Programming™In-Circuit debugging supportProgrammable code protection
COST PER PIECE
The PIC16F506-I/P is a 8-bit fully-static Flash-based CMOS Microcontroller for personal care appliances and security systems to low-power remote transmitters/receivers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single-cycle except for program branches, which take two cycles. The PIC16F506 device delivers performance in an order of magnitude higher than their competitors in the same price category. The easy-to-use and easy-to-remember instruction set reduces development time significantly. The PIC16F506 products are equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external reset circuitry.1.125ms DRT (device reset timer)Baseline core with 33 instructions and 2 stack levelsAll single-cycle instructions except for program branches which are two cycles25mA Source/sink current I/OLow power (100nA) sleep currentOne 8-bit timer (TMR0)Watchdog timer (WDT)In-Circuit Serial Programming™ (ICSP™) capabilityIn-Circuit Debugging supportProgrammable code protection
Applications:
Security, Consumer Electronics, AutomotiveWarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
PACK OF 4500 PIECES
The PIC16F1947T-I/PT is a high-performance microcontroller from Microchip Technology's PIC16 family. This device is designed for versatility and efficiency, making it ideal for a wide range of applications, from industrial control to consumer electronics.Key Features:1. **8-bit Core:** Offers a balance between performance and ease of use, ideal for applications requiring efficient low-speed data manipulation.2. **Integrated Flash Memory:** With a substantial 28 KB of flash memory, it provides ample space for storing complex programs and data.3. **RAM and EEPROM:** Includes 1 KB of RAM and 256 bytes of EEPROM, allowing for temporary data storage and persistent settings.4. **Integrated Peripherals:** Comes with various integrated peripherals, including serial communication modules, timers, and analog-to-digital converters (ADCs).5. **Low Power Consumption:** Designed for low-power operations, making it ideal for battery-powered applications.6. **In-Circuit Programming Technology:** Enables programming and firmware updates directly in the final application.7. **64-pin TQFP Package:** Its compact packaging allows for integration into dense and complex circuit designs.
Applications:
- Industrial automation.- Control systems for home appliances.- Automotive electronics.- Portable and low-power devices.The PIC16F1947T-I/PT is a robust and reliable solution for developers looking for a microcontroller that strikes a good balance between performance, functionality, and cost. Its versatility makes it suitable for a wide range of applications, from hobby projects to complex industrial solutions.
COST PER PIECE
PIC16F1947-I/PT is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +85°C and has 64 pin in TQFP package. This device is lead free.
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with self read/write capability184 LCD segment drive supportInternal 32 MHz oscillatorIntegrated Capacitive mTouch Sensing Module2xMI2C, 2xSPI, 2xEUSART w/auto baud3 ECCP & 2 CCP (Enhanced/Capture Compare PWM)Comparators with selectable Voltage Reference17 Channel 10b ADC with Voltage Reference25 mA Source/Sink current I/OFour 8-bit Timers (TMR0/TMR2/TMR4/TMR6)One 16-bit Timer (TMR1)Extended Watchdog Timer (EWDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)Wide Operating Voltage (1.8 V – 5.5 V)Low Power PIC16LF1947 variant (1.8 V – 3.6 V)
COST PER PIECE
The PIC16F1934-I/MV is a flash based 512 B RAM 8-bit CMOS microcontroller with LCD driver and XLP technology. It is comes in an industrial temperature range of -40 ºC to +85 ºC.
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with self read/write capability60 LCD segment drive supportInternal 32 MHz oscillatorIntegrated Capacitive mTouch Sensing ModuleIntegrated Temperature IndicatorMI2C, SPI, EUSART w/auto baud3 ECCP & 2 CCP (Enhanced/Capture Compare PWM)Comparators with selectable Voltage Reference11 Channel 10b ADC with Voltage Reference25 mA Source/Sink current I/OFour 8-bit Timers (TMR0/TMR2/TMR4/TMR6)One 16-bit Timer (TMR1)Extended Watchdog Timer (EWDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)Wide Operating Voltage (1.8 V – 5.5 V)Low Power PIC16LF1936 variant (1.8 V – 3.6 V)
COST PER PIECE
PIC16F1936-I/SO is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +85°C and has 28 pin in SOIC package. This device is lead free.
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with self read/write capability60 LCD segment drive supportInternal 32 MHz oscillatorIntegrated Capacitive mTouch Sensing ModuleMI2C, SPI, EUSART w/auto baud3 ECCP & 2 CCP (Enhanced Capture/Compare/PWM)Comparators with selectable Voltage Reference11 Channel 10b ADC with Voltage Reference25 mA Source/Sink current I/OFour 8-bit Timers (TMR0/TMR2/TMR4/TMR6)One 16-bit Timer (TMR1)Extended Watchdog Timer (EWDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)Wide Operating Voltage (1.8 V – 5.5 V)Low Power PIC16LF1936 variant (1.8 V – 3.6 V)
COST PER PIECE
The PIC16F1827-I/P is part of PIC16F mid-range family with a 8-Bit Microcontroller. It can sustain standard temperature ranges from -40°C to +85°C and has 18 pin in PDIP package. This device is lead free.
Features:
Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with self read/write capability
COST PER PIECE
The PIC16F1824-I/P is a versatile and efficient microcontroller from Microchip Technology, belonging to the renowned PIC16F family. This device is specifically engineered to cater to a diverse array of applications, ranging from simple hobby projects to sophisticated industrial controls.Key Features:1. **8-bit Processor:** The core of the PIC16F1824-I/P is an 8-bit processor, which strikes an excellent balance between processing power and ease of use, making it well-suited for a variety of applications.2. **Integrated Flash Memory:** It comes with 7 KB of internal flash memory, providing substantial space for program storage and facilitating complex applications.3. **RAM and EEPROM:** This microcontroller includes 512 bytes of RAM for temporary data storage and 256 bytes of EEPROM for data that needs to be retained across power cycles.4. **Rich Set of Peripherals:** The PIC16F1824-I/P is equipped with a range of integrated peripherals such as serial communication interfaces, PWM modules, timers, and up to 12 channels of 10-bit Analog-to-Digital Converters (ADCs), enhancing its utility in various applications.5. **Low Power Consumption:** It is designed for energy efficiency, making it an ideal choice for battery-operated and power-sensitive applications.6. **In-Circuit Serial Programming (ICSP):** Offers ease of programming and reprogramming within the circuit, greatly simplifying development and updates.7. **14-pin PDIP Package:** The device is available in a 14-pin PDIP package, allowing for easy integration into both breadboard-based prototypes and final product designs.
Applications:
- Home automation systems.- Small-scale industrial controls.- Automotive electronics.- Sensor monitoring and data logging.- Battery-operated devices and power-sensitive applications.The PIC16F1824-I/P is a highly capable microcontroller that provides a perfect blend of functionality, performance, and energy efficiency, making it a preferred choice for a wide spectrum of electronic projects and commercial products. Its ease of use and robust feature set ensure it is a go-to solution for both novice and experienced developers.
COST PER PIECE
The PIC16C781-I/P is a feature-rich microcontroller from the PIC16C family, developed by Microchip Technology. This device stands out for its unique combination of performance and specialized features, tailored to meet the demands of a broad spectrum of applications, from advanced hobbyist projects to professional-grade industrial applications.Key Features:1. **8-bit CMOS Microcontroller:** The heart of the PIC16C781-I/P is an 8-bit CMOS microcontroller, offering a harmonious balance between computational capability and power efficiency, suitable for a variety of applications.2. **Enhanced Core Features:** It includes an enhanced set of core features, such as a larger instruction set and improved interrupt handling, providing more versatility in programming and operation.3. **Built-in Analog Peripherals:** One of the key differentiators of the PIC16C781-I/P is its array of built-in analog peripherals. This includes an 8-channel 10-bit Analog-to-Digital Converter (ADC), two analog comparators, and a Programmable Gain Amplifier (PGA), making it ideal for sensor-based applications.4. **Programmable Memory:** Equipped with 2 KB of programmable flash memory, it offers sufficient space for storing complex applications and data.5. **RAM and EEPROM:** Comes with 128 bytes of RAM for data storage and 128 bytes of EEPROM for persistent data storage.6. **In-Circuit Programming Capability:** Supports in-circuit programming, allowing for convenient programming and reprogramming of the device within the application circuit.7. **Versatile I/O Options:** Features versatile I/O options with 15 I/O pins, enabling it to interface with a wide range of external devices and sensors.8. **28-pin PDIP Package:** The microcontroller is available in a 28-pin PDIP package, compatible with standard breadboards and suitable for prototyping as well as final product integration.
Applications:
- Sensor data acquisition and processing.- Industrial control systems.- Home automation.- Automotive electronics.- Instrumentation and measurement systems.The PIC16C781-I/P microcontroller is renowned for its advanced analog capabilities and enhanced core features, making it an exceptional choice for projects and products that require precise sensor interfacing and robust control functionalities. Its adaptability and feature set cater to both hobbyists and professionals in the field of electronics and embedded systems.
COST PER PIECE
Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers.The 8-bit PIC® microcontroller solutions feature a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, comprehensive application notes, complete technical documentation and post design-in support through a worldwide sales and distribution network. Microchip is committed to easy migration across product families, providing seamless program memory expansion, pin compatibility, and a unified development environment for all products.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single word instructions) CMOS ROM-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into a 14-pin package. Easily adapted for applications ranging from personal care appliances and security systems to low power remote transmitters/receivers.PIC16C505-04E/P is part of the PIC16C5XX Series family with a 8-Bit Microcontroller.It can sustain standard temperature ranges from -40°C to +125°C and has 14 pin in PDIP package. This device is lead free.
Features:
High-Performance RISC CPU:Only 33 single word instructions to learnOperating speed:DC - 20 MHz clock inputDC - 200 ns instruction cyclePeripheral Features:11 I/O pins with individual direction control1 input pinHigh current sink/source for direct LED driveTimer0: 8-bit timer/counter with 8-bit programmable prescalerSpecial Microcontroller Features:In-Circuit Serial Programming (ICSP™)Power-on Reset (POR)Device Reset Timer (DRT)Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operationCMOS Technology:Low-power, high-speed CMOS EPROM technologyFully static designWide operating voltage range (2.5 V to 5.5 V)
COST PER PIECE
The PIC12F675-E/SN is part of the PIC12F Series family with a 8-Bit CMOS Microcontroller.It can sustain standard temperature ranges from -40°C to +125°C and has 8 pin in SOIC package. This device is lead free.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture into an 8-pin package and features 4 channels for the10-bit Analog-to-Digital (A/D) converter, 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.
Features:
128 bytes of EEPROM data memoryProgrammable pull-up resistorsMPLAB® ICD-2 programming support or debugging support with optional header adapter4 oscillator selections including 4 MHz RC oscillator with programmable calibration
COST PER PIECE
Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers. The 8-bit PIC® microcontroller solutions feature a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, comprehensive application notes, complete technical documentation and post design-in support through a worldwide sales and distribution network. Microchip is committed to easy migration across product families, providing seamless program memory expansion, pin compatibility, and a unified development environment for all products.This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture into an 8-pin package and features 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.PIC12F629-I/P is part of the PIC12F Series family with a 8-Bit Flash Microcontroller.It can sustain standard temperature ranges from -40°C to +125°C and has 8 pin in PDIP package. This device is lead free.
Features:
128 bytes of EEPROM data memoryProgrammable pull-up resistorsMPLAB® ICD-2 programming support or debugging support with optional header adapter4 oscillator selections including 4 MHz RC oscillator with programmable calibrationPower-On Reset.
COST PER PIECE
Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers. The 8-bit PIC® microcontroller solutions feature a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, comprehensive application notes, complete technical documentation and post design-in support through a worldwide sales and distribution network. Microchip is committed to easy migration across product families, providing seamless program memory expansion, pin compatibility, and a unified development environment for all products.PIC12F615-I/P is part of the PIC12F Series family with a 8-Bit Flash Microcontroller.It can sustain standard temperature ranges from -40°C to +125°C and has 8 pin in PDIP package. This device is lead free.
Features:
Flash Program MemoryInternal 4/8MHz oscillatorComparator with hysterisis (user configurable)Mid-Range core with 35 Instruction, 8 Stack Levels25 mA Source/Sink current I/OTwo 8-bit Timer (TMR0/TMR2)One 16-bit Timer (TMR1)Watchdog Timer (WDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)Enhanced Capture Compare PWM (Pulse Width Modulation)Wide Operating Voltage (2.0 V – 5.5 V)High Voltage PIC12HV615 variant (2.0 V – User Defined) with internal shunt regulator
