Discrete

PACK OF 1000 PIECES The PKC-136 is a Transient Voltage Suppressor (TVS) diode designed to provide protection against voltage spikes. This specific model is rated for a clamping voltage of 160 volts and can handle peak power surges of up to 1500 watts. Voltage Rating (160V): The 160-volt rating indicates the clamping voltage of the diode, the level at which it begins to conduct electricity to ground, protecting the circuit from voltage spikes. Peak Power (1500W): The 1500 watt peak power rating specifies the maximum transient power that the diode can safely dissipate. This high power handling capacity is crucial for protecting electronic components from sudden and extreme voltage surges, such as those caused by lightning strikes or electrostatic discharge. TVS Diode: TVS diodes are used to protect sensitive electronic circuits from voltage transients. They are designed to respond rapidly to overvoltage events, clamping the excess voltage and diverting the surge current away from the sensitive components. Model (PKC-136): The model number PKC-136 helps in identifying the specific characteristics and performance specifications of this TVS diode. This information is useful for engineers and technicians when selecting the appropriate component for their circuit protection needs. Applications: TVS diodes like the PKC-136 are widely used in a variety of electronic applications, including power supply circuits, communication systems, automotive electronics, and other environments where voltage spikes can occur. Features: Key features of TVS diodes include fast response time to voltage spikes, the ability to handle high transient power, and durability under repetitive surge events. The PKC-136 TVS diode, with its 160V clamping voltage and 1500W peak power capacity, is an effective solution for safeguarding electronic circuits against voltage transients. Its capabilities make it suitable for a wide range of applications where robust surge protection is essential.

Read more less

PACK SMD OF 3000 PIECES  The ESDA14V2L is a Dual Transil ESD Protection Device Array for ESD protection. It is designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients. It can also work as bidirectional suppressor by connecting only pin1 and 2. 2 Unidirectional Transil functions 300W at 8/20µs Peak pulse power <20µA at VBR Maximum low leakage current (IR) High ESD protection level up to 25kV High integration Suitable for high density boards -40 to 125°C Operating temperature range DIODE ARRAY, TVS, DUAL, 14.2VBD; Clamping Voltage Vc Max: -; Diode Case Style: SOT-23; No. of Pins: 3Pins; Operating Voltage: 12V; Power Dissipation Pd: 300W; Product Range: ESDA1 Series; Automotive Qualification Standard: -; SVHC: No SVHC (17-Dec-2015); Breakdown Voltage: 14.2V; Breakdown Voltage Max: 15.8V; Breakdown Voltage Min: 14.2V; Breakdown Voltage Range: 14.2V to 15.8V; Breakover Voltage Min: 14.2V; Capacitance Cd @ Vr Typ: 90pF; Current Ir Max: 1mA; Device Marking: ESDA14V2L; Diode Type: Unidirectional TVS; Operating Temperature Max: 125°C; Operating Temperature Min: -40°C; Operating Temperature Range: -40°C to +125°C; Peak Pulse Current Ippm: 15A; Peak Pulse Power Dissipation: 300W; Peak Pulse Voltage: 25kV; Reverse Leakage Current Max: 5µA; Reverse Stand-Off Voltage Vrwm: 12V; SMD Marking: EL15; Stand-off Voltage: 12V; TVS Polarity: Unidirectional Applications Computers & Computer Peripherals, Communications & Networking, Industrial

Read more less

  PACK OF 50 PIECES The BTB16-800CWR is a snubberless triac designed for high-power switching applications. It is capable of handling currents up to 16 amperes and voltages up to 800 volts, with a gate trigger current of 35 milliamperes. Packaged in a TO-220 format, this triac is suitable for AC switching applications where efficient and reliable control of high power is needed. Key Features and Benefits: High Current and Voltage Ratings: With a current rating of 16A and a voltage rating of 800V, this triac can handle significant power levels, making it suitable for a range of high-power applications. Snubberless Design: The snubberless feature allows for easier and more efficient operation, especially in inductive load applications. This design simplifies circuit complexity and improves overall performance. Gate Trigger Current (35mA): A relatively low gate trigger current makes it easier to drive the triac, allowing for compatibility with a wider range of control circuits. TO-220 Package: The TO-220 package is a standard and widely used package for power semiconductors, known for its good heat dissipation properties. Versatile Applications: Ideal for use in motor control, lighting control, and power switching applications, especially where high voltages and currents are involved. Model (BTB16-800CWR): The specific model number ensures accurate identification and procurement, facilitating the correct component selection for power control systems and repairs. In summary, the BTB16-800CWR is a powerful and versatile triac, well-suited for controlling high power in various AC applications. Its high current and voltage ratings, along with the snubberless design and low gate trigger current, make it a suitable and efficient choice for a wide range of industrial and consumer applications requiring reliable power control.

Read more less

PACK OF 50 PIECES The BTA24-600BWRG is a 3-pin Insulated Triac, suitable for general purpose mains power AC switching. It features high current, low thermal resistance with clip bonding and high commutation (4 quadrant) or very high commutation (3 quadrant) capability. 4A Peak gate current 50mA Snubberless sensitivity and type 25A in TO-220AB Current TRIAC, 24A, 600V, TO-220AB; Peak Repetitive Off-State Voltage, Vdrm: 600V; On State RMS Current IT(rms): 24A; Triac Case Style: TO-220AB; Gate Trigger Current Max (QI), Igt: 50mA; Gate Trigger Voltage Max Vgt: 1.5V; Peak Gate   Applications Motor Drive & Control, Industrial

Read more less

PACK OF 50 PIECES The BTA16-600BWRG is a 3-pin Snubberless Insulated TRIAC for general purpose AC switching and can be used as ON/OFF function. The BTA series TRIAC provides voltage insulated tab by using an internal ceramic pad. High commutation performance Low thermal resistance with clip bonding Medium current operation TRIAC, 16A, 600V, TO-220AB; Peak Repetitive Off-State Voltage, Vdrm: 600V; On State RMS Current IT(rms): 16A; Triac Case Style: TO-220AB; Gate Trigger Current Max (QI), Igt: 50mA; Gate Trigger Voltage Max Vgt: 1.5V; Peak Gate Applications Motor Drive & Control, Industrial, Lighting

Read more less

  PACK SMD OF 3000 PIECES  The TL431CL3T is a programmable shunt voltage references with guaranteed temperature stability over the entire operating temperature range. The output voltage can be set to any value between 2.5 and 36 V with two external resistors.It operate with a wide current range from 1 to 100 mA with a typical dynamic impedance of 0.22 Ω. It has an Operating temperature ranges b/w 0 °C to 70 °C.   Features: Adjustable output voltage: 2.5 to 36 VSink current capability: 1 to 100 mATypical output impedance: 0.22 Ω1% and 2% voltage precisionAutomotive temp. range - 40 °C to +125 °C Applications: Power supplyIndustrialAutomotive

Read more less

  PACK OF 100 PIECES The STTH3R02 uses ST's new 200 V planar Pt doping technology, and it is specially suited for switching mode base drive and transistor circuits. Packaged in DO-201AD, DO-15, and SMC, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection. Features: Very low conduction lossesNegligible switching lossesLow forward and reverse recovery timesHigh junction temperature

Read more less

  PACK OF 2000 PIECES Transistor Polarity = N-Channel / Configuration = Single / Continuous Drain Current (Id) A = 4 / Drain-Source Voltage (Vds) V = 60 / ON Resistance (Rds(on)) Ohm = 45 / Gate-Source Voltage V = 15 / Fall Time ns = 40 / Rise Time ns = 28 / Turn-OFF Delay Time ns = 45 / Turn-ON Delay Time ns = 15 / Operating Temperature Min. °C = -55 / Operating Temperature Max. °C = 150 / Package Type = SOIC-8 / Pins = 8 / Mounting Type = SMD / Packaging = Tape & Reel  

Read more less

PACK OF 50 PIECES The STP11NM60ND is a FDmesh™ II N-channel Power MOSFET features low input capacitance and gate charge. This FDmesh™ II Power MOSFET belongs to the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced ON-resistance and fast switching with an intrinsic fast recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. The worldwide best RDS (ON) area amongst the fast recovery diode device Low gate input resistance Applications: Industrial, Power Management

Read more less

PACK OF 50 PIECES The STP10NK60ZFP is a 600V N-channel Zener-protected Power MOSFET developed using SuperMESH™ technology, achieved through optimization of well established strip-based PowerMESH™ layout. In addition to a significant reduction in on resistance, this MOSFET is designed to ensure a high level of dv/dt capability for the most demanding applications. Improved gate charge and lower power dissipation to meet today's challenging efficiency requirements. Extremely high dv/dt capability 100% Avalanche tested Gate charge minimized Zener-protected Applications: Industrial

Read more less

  PACK OF 50 PIECES The BTA06-600TRG is a triac, a type of semiconductor device widely used in AC power control applications. It's designed to switch and control high-current AC loads, offering a maximum current rating of 6 amperes and a peak off-state voltage of 600 volts. This makes it suitable for handling moderate power levels in applications such as motor control, lighting dimming, and heating regulation.One of the key features of the BTA06-600TRG is its gate trigger voltage, which is low enough to be easily driven by microcontrollers and other low-power control circuits, facilitating its integration into digital control systems. The "TRG" suffix typically indicates specific packaging and series details; in this case, it is likely to represent a particular form factor or series within the BTA06 range.The device comes in a TO-220 package, known for its good thermal properties, making it capable of handling higher power dissipation without overheating. It's also designed with robustness in mind, featuring high surge current capability and immunity to dV/dt, ensuring reliable performance in environments with electrical noise and fluctuations.Ideal for both commercial and domestic AC power control applications, the BTA06-600TRG combines efficient power handling with ease of control, making it a versatile choice for designers and engineers working on AC power systems.

Read more less

  PACK OF 100 PIECES The TMPSA42 TR is an NPN bipolar junction transistor (BJT) encased in a TO-92 package. It is designed to handle voltages up to 300 volts. This type of transistor is commonly used in a variety of electronic circuits for amplification and switching applications. Transistor Type (NPN): As an NPN transistor, it requires a positive voltage at its base relative to the emitter to conduct current from the collector to the emitter. NPN transistors are widely used in both digital and analog circuits for their efficient current control and amplification capabilities. Package (TO-92): The TO-92 package is a standard, small-sized plastic package commonly used for low-power transistors. It's popular in electronic projects and commercial products due to its ease of handling and soldering on circuit boards. Voltage Rating (300V): With a voltage rating of 300 volts, the TMPSA42 TR is suitable for high-voltage applications. This makes it ideal for use in power regulation, switching applications, and other circuits where high voltage capacity is required. Applications: This transistor is versatile for use in various high-voltage electronic applications, such as in power supplies, amplifiers, and switching circuits. It's also used in signal processing and other electronic devices that require the management of high voltage levels. Features: NPN transistors like the TMPSA42 TR are known for their reliability and high voltage handling. They are key components in electronic circuits due to their ability to amplify signals and switch high voltages efficiently. The TMPSA42 TR NPN transistor, with its high voltage handling capability in a compact TO-92 package, is an excellent choice for electronic projects and devices that require efficient control and management of high voltage levels.

Read more less

  PACK OF 100 PIECES The TIP34C is a PNP bipolar junction transistor (BJT) housed in a TO-220 package. It is designed to handle a collector-emitter voltage of up to 100 volts and a collector current of up to 10 amperes, with a power dissipation of 80 watts. This transistor is typically used in high-power electronic applications. Transistor Type (PNP): As a PNP transistor, the TIP34C requires a negative voltage at its base relative to the emitter for current to flow from the emitter to the collector. PNP transistors are commonly used in electronic circuits for applications such as power amplification and switching, often in conjunction with NPN transistors. Package (TO-220): The TO-220 package is a medium-sized, through-hole mounting package known for its good heat dissipation capabilities. It is commonly used for power transistors and other semiconductor devices that require moderate to high power levels. Voltage Rating (100V): With a voltage rating of 100 volts, the TIP34C can handle high voltages, making it suitable for electronic circuits operating at higher voltages. Current Rating (10A): The ability to handle a collector current of up to 10 amperes makes this transistor suitable for driving large loads, applicable in power supply circuits, motor controllers, and other high-current applications. Power Dissipation (80W): The power dissipation of 80 watts indicates the amount of heat that the transistor can safely dissipate while operating. This high power rating necessitates effective heat management, often requiring a heatsink. Applications: The TIP34C is versatile for use in high-power applications, including power amplifiers, voltage regulators, switching circuits, and as a driver in motor control systems. Features: PNP transistors like the TIP34C are known for their ability to control high current and voltage levels efficiently. They are fundamental components in both analog and digital electronic circuits where high power handling is necessary. The TIP34C PNP transistor, with its high current and voltage handling capabilities in a TO-220 package, is a robust choice for electronic designs that require a component capable of managing high power levels efficiently.

Read more less

  PACK OF 50 PIECES The TIP125 is a PNP bipolar junction transistor (BJT) encapsulated in a TO-220 package. It's designed to handle a collector-emitter voltage of up to 60 volts, a collector current of up to 5 amperes, and has a power dissipation capacity of 65 watts. This transistor is suitable for a range of medium to high-power electronic applications. Transistor Type (PNP): As a PNP transistor, the TIP125 requires a negative voltage at its base relative to the emitter to allow current flow from the emitter to the collector. PNP transistors are commonly used in various electronic circuits, including power amplification and switching applications. Package (TO-220): The TO-220 package is a standard, medium-sized, through-hole mounting package known for good heat dissipation capabilities. It's often used for power transistors and other semiconductor devices that operate at moderate to high power levels. Voltage Rating (60V): With a voltage rating of 60 volts, the TIP125 can handle moderate voltage levels, making it suitable for various electronic circuits, including those operating at higher voltages. Current Rating (5A): The capability to handle a collector current of up to 5 amperes makes the TIP125 suitable for powering medium-sized loads, applicable in circuits like power regulators, motor drivers, and audio amplifiers. Power Dissipation (65W): The power dissipation of 65 watts indicates the transistor's capacity to dissipate heat generated during operation. This high power rating suggests the need for adequate heat sinking to maintain optimal performance. Applications: The TIP125 is versatile and can be used in a range of applications requiring medium to high power handling, such as in power supply circuits, motor control systems, and audio amplifiers. Features: PNP transistors like the TIP125 are essential for their efficiency in controlling high current levels. They are key components in analog and digital circuits where power handling and amplification are required. The TIP125 PNP transistor, with its 60V voltage rating, 5A current handling, and 65W power dissipation in a TO-220 package, is a robust choice for electronic designs that require efficient power handling capabilities in a variety of medium to high-power applications.

Read more less

  PACK OF 100 PIECES The TCDL13005 is an NPN bipolar junction transistor (BJT) housed in a TO-220 package. It is designed to handle a collector current of up to 4 amperes (A) and can withstand voltages up to 400 volts, with a power dissipation of 2 watts. This transistor is suitable for various high-power electronic applications. Transistor Type (NPN): Being an NPN transistor, it requires a positive voltage at its base relative to the emitter to allow current flow from the collector to the emitter. NPN transistors are widely used in electronic circuits for amplification and switching purposes. Package (TO-220): The TO-220 package is a widely used, medium-sized, through-hole mounting package known for its good heat dissipation capabilities. It is commonly used for power transistors and other high-power semiconductor devices. Collector Current (4A): With a maximum collector current rating of 4 amperes, the TCDL13005 is capable of controlling significant levels of current, making it suitable for powering larger loads in electronic circuits. Voltage Rating (400V): The voltage rating of 400 volts indicates the maximum voltage the transistor can handle between its collector and emitter when the transistor is off. This high voltage rating makes it suitable for use in high-voltage electronic circuits. Power Dissipation (2W): The power dissipation rating of 2 watts indicates the amount of heat that the transistor can safely dissipate while operating. This is a crucial factor for the transistor's performance and longevity, and it may require additional heat sinking in high-power applications. Applications: The TCDL13005 transistor is versatile and can be used in a variety of high-power applications, including power regulation, motor control, and as a component in various electronic circuits such as power amplifiers, switching power supplies, and high-voltage regulation systems. Features: NPN transistors like the TCDL13005 are appreciated for their efficiency in handling high current and voltage levels. They are fundamental components in both analog and digital electronic circuits where high power handling is necessary. The TCDL13005 NPN transistor, with its high current and voltage handling capabilities in a TO-220 package, is a robust choice for electronic designs that require a component capable of managing high power levels efficiently.

Read more less

PACK OF 20 PIECES The TBD135 is an NPN bipolar junction transistor (BJT) packaged in a TO-126 case. It's designed to handle a collector current of 500 milliamperes (mA) and can withstand voltages up to 45 volts, with a power dissipation of 1.25 watts. This transistor is suitable for a variety of general-purpose electronic applications. Transistor Type (NPN): As an NPN transistor, it requires a positive voltage at its base relative to the emitter to conduct current from the collector to the emitter. NPN transistors are commonly used for amplification and switching purposes. Package (TO-126): The TO-126 package is a medium power transistor package often used where a moderate power level is required. It's suitable for both through-hole mounting and surface mounting, depending on the specific design of the package. Collector Current (500mA): With a maximum collector current rating of 500mA, the TBD135 can control moderate levels of current, making it suitable for driving small to medium loads in electronic circuits. Voltage Rating (45V): The voltage rating of 45 volts indicates the maximum voltage the transistor can handle between its collector and emitter when the transistor is off. This makes it suitable for use in electronic circuits operating within this voltage range. Power Dissipation (1.25W): The power dissipation rating of 1.25 watts is an indication of the amount of heat the transistor can handle while operating without damage. It is an important factor in determining the need for additional heat sinking. Applications: The TBD135 transistor is versatile for use in a range of applications, including signal amplification, power regulation, and as a component in various electronic circuits such as audio amplifiers, power switches, and control systems. Features: NPN transistors like the TBD135 are appreciated for their efficiency and ease in controlling electrical signals. They are fundamental in both analog and digital electronic circuits. The TBD135 NPN transistor, with its specific ratings and TO-126 packaging, is a reliable choice for electronic designs that require a component to manage moderate power levels with a balance between current handling, voltage capacity, and power dissipation.

Read more less

  PACK OF 100 PIECES The PN2222A is an NPN bipolar junction transistor (BJT) encased in a TO-92 package. It's designed to handle a collector current of up to 600 milliamperes (mA) and can withstand voltages up to 40 volts, with a current gain (hFE) of 40. This transistor is widely used in various electronic applications for switching and amplification. Transistor Type (NPN): The PN2222A is an NPN transistor, which requires a positive voltage at its base relative to the emitter to allow current flow from the collector to the emitter. NPN transistors are commonly used in electronic circuits for signal amplification and as switch controllers. Package (TO-92): The TO-92 package is a standard, small-size plastic package used for low-power transistors. It's favored for its ease of handling and soldering on circuit boards. Collector Current (600mA): With a maximum collector current rating of 600mA, the PN2222A can control a moderate level of current, suitable for driving small to medium-sized loads in electronic circuits. Voltage Rating (40V): The voltage rating of 40 volts indicates the maximum voltage the PN2222A can handle between its collector and emitter when the transistor is off, making it suitable for a range of low to medium-voltage applications. Current Gain (40hFE): The current gain, or hFE, of 40 indicates the transistor's efficiency in amplifying the input signal. It means the collector current is 40 times the base current under certain conditions. Applications: The PN2222A is versatile for use in various applications, including signal amplification in audio devices, power regulation in electronic circuits, and as a switch in digital devices. It's also commonly used in DIY electronic projects and consumer electronics. Features: NPN transistors like the PN2222A are known for their efficiency in amplifying and controlling electrical signals. They are key components in both analog and digital circuits where moderate power handling is required. The PN2222A NPN transistor, with its specifications of 600mA collector current, 40V voltage rating, and 40hFE in a TO-92 package, is a popular choice for a wide range of electronic applications, offering reliable performance in both amplification and switching functions.

Read more less

  PACK OF 100 PIECES The MPSA42 is an NPN bipolar junction transistor (BJT) packaged in a TO-92 casing. It is designed to handle a collector current of up to 500 milliamperes (mA) and withstand voltages up to 300 volts, with a current gain (hFE) of 40. This transistor is suitable for a variety of electronic applications, particularly in high-voltage circuits. Transistor Type (NPN): As an NPN transistor, it requires a positive voltage at its base relative to the emitter for current to flow from the collector to the emitter. NPN transistors are commonly used for signal amplification and switching applications. Package (TO-92): The TO-92 package is a widely used, compact, through-hole package, suitable for low-power applications. It is known for its ease of handling and integration into various electronic circuits. Collector Current (500mA): With a maximum collector current of 500mA, the MPSA42 can control moderate levels of current, making it suitable for driving small to medium loads in electronic circuits. Voltage Rating (300V): The voltage rating of 300 volts indicates the maximum voltage the MPSA42 can handle between its collector and emitter when the transistor is off. This high voltage rating makes it suitable for electronic circuits operating at higher voltages. Current Gain (40hFE): The current gain, or hFE, of 40, indicates the transistor's efficiency in amplifying the input signal. A hFE of 40 means that the collector current is 40 times the base current. Applications: The MPSA42 is versatile and can be used in high-voltage applications, such as power regulation, signal processing, and switching applications. It's also suitable for use in audio amplifiers, power supplies, and other electronic devices that require high voltage handling capabilities. Features: NPN transistors like the MPSA42 are appreciated for their efficiency in controlling and amplifying electrical signals. They are fundamental components in both analog and digital electronic circuits. The MPSA42 NPN transistor, with its 500mA collector current, 300V voltage rating, and hFE of 40 in a TO-92 package, is a reliable choice for electronic designs requiring a component capable of managing moderate power levels in high-voltage environments.

Read more less

  PACK OF 100 PIECES The MPSA13 is an NPN bipolar junction transistor (BJT) housed in a TO-92 package. It is designed to handle a collector current of up to 500 milliamperes (mA) and can withstand voltages up to 30 volts. This transistor is suitable for a wide range of electronic applications.Transistor Type (NPN): Being an NPN transistor, the MPSA13 requires a positive voltage at its base relative to the emitter to allow current flow from the collector to the emitter. NPN transistors are widely used in switching and amplification applications.Package (TO-92): The TO-92 package is a widely used packaging style for transistors, known for its small size and convenient handling. This package is suitable for through-hole mounting on circuit boards.Collector Current (500mA): With a maximum collector current rating of 500mA, the MPSA13 is capable of controlling moderate levels of current, making it suitable for driving small loads in electronic circuits.Voltage Rating (30V): The voltage rating of 30 volts indicates the maximum voltage the MPSA13 can handle between its collector and emitter when the transistor is off. This makes it suitable for use in electronic circuits operating within this voltage range.Applications: The MPSA13 is versatile and can be used in a variety of applications, including signal amplification, switching applications, and as a component in various electronic circuits such as audio amplifiers, power regulators, and control systems.Features: NPN transistors like the MPSA13 are appreciated for their efficiency and simplicity in controlling electrical signals. They are fundamental components in both analog and digital electronic circuits.The MPSA13 transistor, with its NPN configuration, moderate current handling capability, and 30V voltage rating, is a reliable and essential component in a wide range of electronic projects and applications. Its TO-92 packaging makes it easy to use in both prototype development and production-scale electronic devices.

Read more less

  PACK SMD OF 3000 PIECES  The BC817-25 is an NPN bipolar junction transistor (BJT) that comes in a small SOT-23 surface-mount package. This transistor is capable of handling a collector current of up to 500mA, making it suitable for medium-power applications. It can operate with collector-to-emitter voltages up to 45V, providing flexibility for use in a variety of electronic circuits. The hFE (current gain) of the BC817-25 ranges between 160 and 400, indicating its efficiency in amplifying current. This transistor is commonly used in general-purpose amplification and switching applications, particularly where a balance of power handling and space-saving design is required. The SOT-23 package is favored for its compact size, making the BC817-25 a popular choice for use in space-constrained applications like mobile devices, portable electronics, and other miniaturized electronic systems. Its versatility and reliable performance make it a go-to component in circuit designs requiring a combination of moderate power handling and small form factor.

Read more less

  PACK OF 100 PIECES The BC557C is a PNP bipolar junction transistor (BJT) packaged in the widely used TO-92 casing. This transistor is designed to handle collector currents up to 100mA, making it a suitable choice for low-power applications. It can withstand collector-to-emitter voltages of up to 45V, offering versatility in a range of electronic circuit implementations. A distinctive feature of the BC557C is its high current gain, with an hFE (current amplification factor) ranging from 420 to 800. This high gain is particularly advantageous for applications requiring significant signal amplification. The BC557C is commonly used in general-purpose amplification and switching operations, especially in scenarios where moderate voltage and low current are involved. The TO-92 package is a standard through-hole mounting design, popular for its ease of use in various electronic assemblies. The BC557C transistor is often utilized in applications such as audio amplifiers, signal processing circuits, and control systems, where reliable and efficient amplification is essential.

Read more less

  PACK OF 100 PIECES The BC557A is a PNP bipolar junction transistor (BJT) housed in a TO-92 package. This transistor is tailored for handling a collector current of up to 100mA, positioning it as suitable for low-power applications. It is capable of withstanding collector-to-emitter voltages up to 45V, enabling its use in a diverse range of circuit designs. The hFE (current gain) for the BC557A lies between 110 and 220, showcasing its capability to amplify signals effectively. Commonly employed in general-purpose amplification and switching, particularly where moderate voltage and low current are involved, the BC557A is a preferred choice. Its TO-92 package is a standard through-hole mounting design, widely used for its convenience in various electronic circuits. The BC557A transistor is frequently utilized in applications such as audio amplifiers, signal processing, and control circuits, where precise and efficient signal amplification is necessary.

Read more less

  PACK OF 100 PIECES The BC547C is an NPN bipolar junction transistor (BJT) encapsulated in a standard TO-92 package. It is capable of handling a collector current up to 100mA, making it suitable for a variety of low-power applications. This transistor can endure collector-to-emitter voltages of up to 45V, providing versatility in different electronic circuit designs. A notable feature of the BC547C is its high current gain, with an hFE (current amplification factor) ranging from 420 to 800. This high gain makes it especially effective for applications requiring substantial current amplification. The BC547C is commonly used in general-purpose amplification and switching tasks, particularly in scenarios where low current and moderate voltage levels are involved. Its TO-92 package is a widely adopted through-hole design, known for its ease of integration into electronic assemblies. The BC547C is frequently employed in audio amplifiers, signal processing circuits, and control systems where reliable and efficient amplification is required.

Read more less

  PACK OF 100 PIECES The BC547A is an NPN bipolar junction transistor (BJT) encapsulated in a TO-92 package. It is designed to handle a collector current of up to 100mA, making it suitable for low-power applications. The transistor can withstand a collector-to-emitter voltage of up to 45V, allowing for flexibility in various circuit implementations. The hFE, or current gain, ranges from 110 to 220, indicating its capacity to amplify a signal. The BC547A is commonly used in general-purpose amplification and switching applications, particularly where low current and moderate voltage are involved. Its TO-92 package is a widely used, through-hole mounting design, favored for its ease of handling and integration into a range of electronic circuits. This transistor is particularly popular in audio amplifiers, signal processing, and control circuits, thanks to its reliable performance and efficient current amplification capabilities.

Read more less

  PACK OF 100 PIECES The BC547A is an NPN bipolar junction transistor (BJT) encapsulated in a TO-92 package. It is designed to handle a collector current of up to 100mA, making it suitable for low-power applications. The transistor can withstand a collector-to-emitter voltage of up to 45V, allowing for flexibility in various circuit implementations. The hFE, or current gain, ranges from 110 to 220, indicating its capacity to amplify a signal. The BC547A is commonly used in general-purpose amplification and switching applications, particularly where low current and moderate voltage are involved. Its TO-92 package is a widely used, through-hole mounting design, favored for its ease of handling and integration into a range of electronic circuits. This transistor is particularly popular in audio amplifiers, signal processing, and control circuits, thanks to its reliable performance and efficient current amplification capabilities.

Read more less

  PACK OF 100 PIECES The BC337-40 is a bulk NPN bipolar junction transistor (BJT) housed in a TO-92 package. This transistor is capable of handling collector currents up to 800mA, making it suitable for medium-power applications. It can withstand collector-to-emitter voltages up to 45V, providing versatility in various circuit designs. The hFE (current gain) of this transistor ranges from 250 to 600, indicating its efficiency in amplifying current. The BC337-40 is widely used in general-purpose amplification and switching applications. Its TO-92 package is a standard, through-hole mounting design, which is commonly used in a variety of electronic circuits. Due to its high current and voltage handling capabilities, along with a significant gain factor, this transistor is a popular choice in audio amplifiers, signal processing, and power management circuits.

Read more less

  PACK OF 100 PIECES The 2N3906 is a popular PNP bipolar junction transistor (BJT) known for its efficiency and reliability in a range of electronic applications. It is commonly used in amplification and switching applications. The transistor can handle a collector-to-emitter voltage (Vce) of up to 40V and a collector current (Ic) of up to 200 mA. It features a moderate current gain (hFE), typically around 100 to 300, making it suitable for a variety of general-purpose applications. The 2N3906 is packaged in the standard TO-92 casing, making it easy to integrate into various circuit designs. Its PNP configuration makes it ideal for use in positive ground circuits and complementary designs with NPN transistors like the 2N3904.

Read more less

  PACK OF 100 PIECES The 2N3904 is a widely used NPN bipolar junction transistor (BJT) known for its versatility and low cost. Ideal for amplification and switching applications, it features a collector-to-emitter voltage (Vce) of 40V and a collector current (Ic) of up to 200 mA. The transistor has a moderate gain value (hFE), typically around 100, making it suitable for various general-purpose applications in electronics. Its TO-92 package is common and easy to handle in circuit designs. The 2N3904 is notable for its reliable performance in a broad range of standard applications, such as small-signal amplification and low-speed switching in audio devices, signal processing, and power management circuits.

Read more less

PACK OF 5000 PIECES The GS1M/M7 is a surface-mount diode (SMD) in a DO-214AC package, capable of handling 1000 volts. It features a forward voltage (Vf) of 1.1 volts. This diode is suitable for high-voltage applications and is often used in power management circuits.Voltage Rating (1000V): With a high voltage rating of 1000 volts, this diode is designed for applications that involve high voltage levels, making it suitable for power supply circuits, converters, and other high-voltage electronic systems.SMD (Surface-Mount Device) - DO-214AC Package: The GS1M/M7 is an SMD component, meaning it is mounted directly onto the surface of a printed circuit board (PCB). The DO-214AC package is widely used due to its small size and ease of integration into electronic circuits.Forward Voltage (Vf 1.1V): The forward voltage of 1.1 volts is the voltage drop across the diode when current flows through it. This parameter is important for determining the power dissipation and efficiency of the diode in a circuit.Applications: This diode is useful in a variety of applications, including rectification in power supplies, voltage regulation circuits, and protection circuits where high voltage capacity is required. It is also used in inverters, converters, and other power conversion systems.Features: Diodes like the GS1M/M7 are known for their reliability, efficient current handling, and ability to withstand high voltages. They are essential components in circuits where controlling the direction of current flow is necessary, especially in high-voltage environments.The GS1M/M7 SMD diode is a robust and reliable choice for electronic designs that require a component to manage high voltage levels with a moderate forward voltage. Its small package size makes it suitable for compact PCB layouts where space efficiency is a priority.

Read more less

PACK WITH 200 DIODES The 1N4148 is a highly versatile and widely used general-purpose diode, encapsulated in a DO-35 package. This diode is rated for 100 volts and a current of 200 milliamperes (200mA), making it suitable for a vast range of electronic applications, particularly in signal processing and switching. Key Features and Benefits: High Voltage Rating (100V): The 100-volt rating makes the 1N4148 suitable for handling moderate voltage levels in electronic circuits, ensuring reliable performance in a variety of applications. Current Capacity (200mA): With a current capacity of 200 milliamperes, this diode can efficiently manage small to medium current levels, making it ideal for signal processing and general electronic switching tasks. DO-35 Package: The compact DO-35 package is known for its durability and reliability, making the 1N4148 suitable for both through-hole and surface-mount PCB applications. Its small size allows for efficient use of board space. Fast Switching Speeds: The 1N4148 is designed for fast switching, with quick response times. This feature is particularly beneficial in high-speed signal switching applications, where rapid changes in current flow are necessary. Versatile Use: This diode is widely used in a variety of applications, including signal modulation, rectification, and protection circuits. Its general-purpose nature makes it a staple component in both hobbyist and professional electronics. Model (1N4148): The specific model number, 1N4148, allows for easy identification and procurement, making it a go-to component for engineers and electronics enthusiasts for a broad range of applications. In summary, the 1N4148 general-purpose diode, with its 100V rating, 200mA current capacity, and fast switching speeds, is a highly reliable and efficient component for numerous electronic applications. Its compact DO-35 package and versatile functionality make it an essential component in various electronic circuits.

Read more less

PACK WITH 200 DIODES The 1N4007 is a robust rectifier diode capable of handling a current of up to 1 ampere (1A) and a peak reverse voltage of 1000 volts (1000V). It is a widely used and reliable component in power supply and conversion applications, providing efficient rectification and voltage regulation. Key Features and Benefits: High Voltage Rating (1000V): The diode's ability to withstand up to 1000 volts makes it suitable for high-voltage applications, ensuring reliable performance in challenging electrical environments. Current Handling (1A): With a maximum continuous forward current rating of 1 ampere, the 1N4007 is ideal for rectifying moderate current levels in electronic circuits, particularly in power supplies and adapters. General Rectification: This diode is commonly used for rectifying alternating current (AC) to direct current (DC), making it a staple in power supply units, chargers, and other electrical power conversion devices. Versatility: The 1N4007 is used in a wide range of applications, from simple power supplies to complex electronic systems, due to its reliable performance and ability to handle significant voltage and current levels. Robust Construction: The diode is built to be durable and reliable, capable of withstanding thermal and electrical stresses typically encountered in rectification applications. Model (1N4007): The specific model number, 1N4007, allows for easy identification and procurement, ensuring the correct component selection for various electronic designs and repairs. In summary, the 1N4007 rectifier diode, with its high voltage rating of 1000V and current handling capacity of 1A, is a highly reliable and essential component in a broad spectrum of power conversion applications. Its robust construction and versatility make it a popular choice among engineers and technicians in the electronics field.

Read more less

PACK WITH 200 DIODES The 1N4004P is a rectifier diode designed to handle a continuous forward current of 1 ampere (1A) and a peak reverse voltage of 400 volts (400V). This component is commonly used in various electronic circuits for efficient rectification and voltage regulation, particularly in medium voltage applications. Key Features and Benefits: Voltage Rating (400V): The ability to withstand up to 400 volts makes the 1N4004P suitable for medium voltage applications, ensuring reliable performance in a range of electrical environments. Current Capacity (1A): With its 1 ampere current rating, this diode is capable of rectifying moderate levels of current, making it ideal for use in power supplies, adapters, and other electronic circuits requiring medium power handling. General Rectification: This diode is widely used for converting alternating current (AC) to direct current (DC), essential in power supply units, chargers, and other electrical power conversion devices. Versatile Applications: The 1N4004P can be used in a broad spectrum of applications, from simple home electronics to more complex power systems, thanks to its reliable performance in handling significant voltage and current levels. Durable Construction: Built to withstand the typical thermal and electrical stresses encountered in rectification applications, this diode offers durability and consistent performance. Model (1N4004P): The model number 1N4004P provides an easy reference for accurate identification and procurement, ensuring the correct component selection for electronic designs and repairs. In summary, the 1N4004P rectifier diode, with its 400V rating and 1A current handling capacity, is a versatile and reliable component for a variety of medium voltage power conversion applications. Its robust build and broad applicability make it a preferred choice for electronics professionals and hobbyists alike.

Read more less