Microcontroller
PIC12F Series 768 B Flash 25 B SRAM Through Hole 8-Bit Microcontroller - PDIP-8
COST PER PIECE Microchip provides solutions for the entire performance range of 8-bit, 16-bit, and 32-bit microcontrollers.The 8-bit PIC® microcontroller solutions feature a powerful architecture, flexible memory technologies, comprehensive easy-to-use development tools, comprehensive application notes, complete technical documentation and post design-in support through a worldwide sales and distribution network. Microchip is committed to easy migration across product families, providing seamless program memory expansion, pin compatibility, and a unified development environment for all products.The PIC12F508 devices from Microchip Technology are low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single cycle (200 μs) except for program branches, which take two cycles. These devices deliver performance an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.PIC12F508-I/P is part of the PIC12F Series family with a 8-Bit Flash Microcontroller.It can sustain standard temperature ranges from -40°C to +85°C and has 8 pin in PDIP package. This device is lead free. Features: Precision 4 MHz internal oscillator.Baseline Core with 33 Instructions, 2 Stack Levels.All single-cycle Instructions except for program branches which are two cycles.12-bit wide instructions.8-bit wide data path.25 mA source/sink current I/O.Low power (100nA) sleep current.One 8-bit timer (TMR0).Watchdog timer (WDT).In Circuit Serial Programming™ (ICSP™) capability.In-Circuit debugging support.Programmable code protection.
$1.23
PIC12F Series 3.5 kB Flash 128 B SRAM Through Hole 8-Bit Microcontroller -PDIP-8
COST PER PIECE The PIC12F1822-I/P is a PIC12 Series 128 B RAM 3.5 kB Flash 8-Bit CMOS Microcontroller. Operating Temperature Ranges from +40°C to -125°C. Features: Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with self read/write capabilityInternal 32 MHz oscillatorIntegrated Capacitive mTouch Sensing ModuleData Signal Modulator ModuleMI2C, SPI, EUSART w/auto baud4 Channel 10 b ADC with Voltage Reference25 mA Source/Sink current I/OTwo 8-bit Timers (TMR0/TMR2)One 16-bit Timer (TMR1)Extended Watchdog Timer (EWDT)Enhanced Power-On/Off-ResetBrown-Out Reset (BOR)In Circuit Serial Programming (ICSP)On Board In-Circuit DebugWide Operating Voltage (1.8 V – 5.5 V)
$1.93
RF Transceiver 2.4 - 2.48GHz 2.4 - 3.6 V 12-Pin | Microchip Technology Inc. MRF24J40MA-I/RM
COST PER PIECE The MRF24J40MA is +0 dBm PICDEM Z 2.4GHz IEEE 802.15.4 radio transceiver module. The MRF24J40MA has an integrated PCB antenna, matching circuitry, and supports the ZigBee™, MiWi™ and MiWi™ P2P protocols. The module is attached to the carrier board with a 12-pin modular connector allowing the RF Board to be used with the current PICDEM Z development kit or as a production module to wirelessly enable customer designs. The MRF24J40MA module can connect to many popular Microchip PIC® microcontrollers and is an ideal solution for wireless sensor networks, home automation, building automation and consumer applications. The MRF24J40MA module operates in the non-licensed 2.4 GHz frequency band and is FCC, IC and ETSI compliant. The integrated module design frees the integrator from extensive RF and antenna design, and regulatory compliance testing, allowing quicker time to market.IEEE Std. 802.15.4™ Compliant RF TransceiverSupports ZigBee®, MiWi™, MiWi™ P2P and proprietary wireless networking protocolsSimple four-wire SPI interface to PIC® microcontrollerIntegrated 20 MHz and 32.768 kHz oscillator driveLow current consumptionHardware CSMA-CA MechanismHardware security engine (AES-128)Up to 400 ft. rangeFCC (USA), IC (Canade), ETSI (Europe) CertifiedHardware Security Engine (AES-128) with CTR, CCM and CBC-MAC modes Applications: Wireless, Security, Building Automation, Consumer Electronics, Consumer ElectronicsWarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts. Product Information: RF Modulation:DSSSData Rate Max:250KbpsFrequency Max:2.483GHzSensitivity dBm:-94dBmSupply Voltage Min:2.4VSupply Voltage Max:3.6VModule Interface:4 Wire, SPISupply Current:23mAProduct Range:-
$816.48
MCP6S26 Series 5.5 V 12 MHz Single-Ended Rail-to-Rail I/O Low Gain PGA -SOIC-14
COST PER PIECE The MCP6S21T-I/MS is a Single-Ended Rail-to-Rail I/O Programmable Gain Amplifier (PGA) with SPI bus to control gain and select input channel. It is available in surface mount SOIC-14 package. Features: SPI Bus to Control Gain and Select Input ChannelGain Steps of 1, 2, 4, 5, 8, 10, 16 and 32 V/V-3 dB Bandwidth of 2 to 12 MHzGain Error < 1%Rail-to-Rail Input and OutputLow Noise: 10 nV/√HzLow Supply Current: 1.1 mA (typical)Single Supply 2.5 V to 5.5 VIndustrial Temperature Range: -40°C to 85°C Applications: A/D Converter DriverMultiplexed Analog ApplicationsData AcquisitionIndustrial InstrumentationTest EquipmentMedical Instrumentation
$3.57
MCP2551 Series 5.5 V 1 Mb/s Surface Mount High-Speed CAN Transceiver - SOIC-8
COST PER PIECE Interface: CAN No of Functions / Channels: 1 Data Rate-Max: 1MBd Supply Voltage-Nom: 4.5V to 5.5V Package Style: SOIC-8 Mounting Method: Surface Mount The MCP2551 series of high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus.The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24 V requirements. It will operate at speeds of up to 1 Mb/s. Features: Slope control inputSupports 1 Mb/s operationImplements ISO-11898 standard physical layer requirementsSuitable for 12 V and 24 V systemsExternally-controlled slope for reduced RFI emissionsPermanent dominant detectLow current standby operationHigh noise immunity due to differential bus implementation
$1.76
MCP2515 Series 5.5 V 1 Mb/s Stand Alone SPI Interface CAN Controller - TSSOP-20
COST PER PIECE Interface: SPI Data Rate-Max: 1MBd Supply Voltage-Nom: 2.7V to 5.5V Package Style: TSSOP-20 Mounting Method: Surface Mount Microchip Technology Inc. is a leading provider of microcontroller and analog semiconductors, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Microchip’s product line is the solution for your embedded design needs. From cost-competitive Analog and Memory devices to performance PIC® Microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs), their devices provide a custom fit in your cost sensitive design. Quickly integrate their devices into applications from simple to complex. Their starter kits and free reference designs can help get you going.CAN (control-area network) is a broadcast serial bus standard for connecting nodes.Each node is able to send and receive messages, but not simultaneously.: a message is transmitted serially onto the bus, one bit after another.The devices that are connected by a CAN network are typically sensors, actuators and control devices.
$3.46
MCP1804 Series 150 mA 5 V Fixed Output SMT LDO Shutdown Regulator - SOT-223
PACK OF 1000 PIECES Input Voltage-Min: 2V Input Voltage-Max: 28V Output Voltage Fixed: 5V Dropout Voltage-Max: 2700mV Output Current-Max: 150mA Rated Power: 1.612W Tolerance (%): ±2% Operating Temp Range: -40°C to +85°C Regulator Topology: Fixed Quiescent Current: 50µA No. of Outputs: Single Load Regulation: 275mV Current - Limit: 200mA Line Regulation (%): 0.3% Package Style: SOT-223 (TO-261-4, SC-73) Mounting Method: Surface Mount The MCP1804T-5002I/DB is a 150 mA 5 V Low Dropout (LDO) Regulator With Shutdown, available in SOT-223-3 package.Features:150 mA Maximum Output CurrentLow Drop Out Voltage, 260 mV typical @ 20 mA, Vr=3.3 V50 μA Typical Quiescent Current0.01 μA Typical Shutdown CurrentInput Operating Voltage Range: 2.0 V to 28.0 VStandard Output Voltage Options: 1.8V, 2.5V, 3.0V, 3.3V, 5.0V, 10.0V, 12.0VOutput Voltage Accuracy: ±2%Output voltages from 1.8V to 18.0V in 0.1V increments are available upon requestStable with Ceramic Output CapacitorsCurrent Limit Protection With Current FoldbackShutdown PinHigh PSRR: 50 dB typical @ 1 kHzApplications:Cordless Phones, Wireless CommunicationsPDAs, Notebook and Netbook ComputersDigital CamerasMicrocontroller PowerCar Audio and Navigation SystemsHome Appliances
$1,231.20
8 Bit Microcontroller, AVR ATmega Family ATmega328 Series Microcontrollers, 20 MHz, 1 KB, 32 KB
COST PER PIECE The ATMEGA328-PU is a low power CMOS 8 bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA328-PU achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. 131 powerful instructions, most single clock cycle execution 32 x 8 general purpose working registers Fully static operation Up to 20MIPS throughput at 20MHz On-chip 2-cycle multiplier Write/erase cycles: 10,000 flash/100,000 EEPROM Optional boot code section with independent lock bits In system programming by on chip boot program True read while write operation Programming lock for software security Atmel® QTouch® library support Capacitive touch buttons, sliders and wheels QTouch and QMatrix® acquisition Up to 64 sense channels Two 8bit timer/counters with separate prescaler and compare mode One 16 bit timer/counter with separate prescaler, compare mode, and capture mode Real time counter with separate oscillator Six PWM channels Programmable serial USART Serial peripheral interface (SPI) Byte oriented 2 wire serial interface Programmable watchdog timer with separate on chip oscillator On chip analogue comparator Interrupt and wake up on pin change Power on reset and programmable brown out detection
$3.40
You have seen 56 out of 56 products