PACK OF 1000 PIECES
The L7812CD2T-TR is a voltage regulator packaged in a D2PAK format. It's designed to provide a stable 12-volt output and can supply up to 1.5 amperes of current. This regulator is suitable for a wide range of electronic applications where a regulated 12V power supply is necessary.Voltage Output (12V): This regulator outputs a constant voltage of 12 volts, making it ideal for electronic circuits that require a stable 12V power source.Current Capacity (1.5A): With a maximum current output of 1.5 amperes, it can power a variety of electronic devices that require a moderate amount of current, ensuring stable operation.D2PAK Package: The D2PAK (TO-263) packaging is known for its robustness and efficient heat dissipation. This makes the regulator suitable for applications where space is limited, and high power density is required.Applications: Commonly used in consumer electronics, automotive applications, and industrial control systems, this voltage regulator is versatile for use in any circuit that requires a reliable 12V supply. It's particularly useful in applications where the input voltage is higher and needs to be regulated down to 12V.L7812 Series: Part of the L7812 series, this regulator is known for its reliability and consistent performance. It typically includes features such as thermal overload protection, short circuit protection, and output transition SOA protection.The L7812CD2T-TR is an excellent choice for projects that require a dependable 12V power source. Its capacity to handle up to 1.5A, along with its robust packaging and built-in protection features, makes it a reliable and versatile component in various electronic applications.
PACK OF 2500 PIECES
The TL431 series programmable shunt Voltage Reference with guaranteed temperature stability over the entire operating temperature range. The output voltage can be set to any value between 2.5 and 36V with two external resistors. The TL431 and TL432 operate with a wide current range from 1 to 100mA with a typical dynamic impedance of 0.22Ω.
-100 to +150mA Continuous cathode current range
VOLTAGE REF, SHUNT, 2.495V-36V, TO-226AA; Voltage Reference Type: Shunt - Adjustable; Product Range: -; Reference Voltage: 2.495V to 36V; Initial Accuracy: 2%; Temperature Coefficient: -; Voltage Reference Case Style: TO-92; No. of Pins: 3Pins; Operating Temperature Min: 0°C; Operating Temperature Max: 70°C; Automotive Qualification Standard: -; MSL: -; SVHC: No SVHC (17-Dec-2015); IC Generic Number: 431; IC Temperature Range: Commercial; Input Voltage Max: 36V; Input Voltage Min: 3V; Operating Temperature Range: 0°C to +70°C; Reference Volt Tolerance ±%: 1%; Reference Volts: 2.495V; Topology: Shunt, Programmable
Applications
Power Management, Industrial, Automotive
PACK OF 2500 PIECES
L78L33ABUTR is a L78L series, three-terminal positive voltage regulator. It employs internal current limiting and thermal shutdown, making it essentially indestructible. If adequate heat-sink is provided, it can deliver up to 100mA output current. It is intended as a fixed voltage regulator in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, it can be used with power pass elements to make high-current voltage regulators. The L78L series used as a zener diode/resistor combination replacement offers improvement along with lower quiescent current and lower noise.
Short-circuit protection
No external components are required
Output voltage is 3.3V typical (TJ = 25°C)
Quiescent current is 6mA maximum (TJ = 25°C)
Output noise voltage is 40µV typical (B = 10Hz to 100KHz, TJ = 25°C)
Supply voltage rejection is 49dB typical (VI = 6.3 to 16.3 V, f = 120Hz, IO = 40mA, TJ = 25°C)
Operating junction temperature range from -40 to 125°C
SOT-89 package
Outputs = 1 / Fixed Output Voltage V = 3.3 / Output Voltage Min. V = 3.1 / Output Voltage Max. V = 3.5 / Dropout Voltage V = 2 / Output Current mA = 100 / Load Regulation mV = 60 / Line Regulation mV = 150 / Supply Voltage Max. V = 30 / Operating Temperature Min. °C = 0 / Operating Temperature Max. °C = 125 / Package Type = SOT-89 / Pins = 4 / Mounting Type = SMD / MSL = Level-1 / Packaging = Tape & Reel / Length mm = 4.6 / Width mm = 4.3 / Height mm = 1.6 / Reflow Temperature Max. °C = 260
PACK OF 50 PIECES
The LM317T is a monolithic integrated circuit, positive adjustable voltage regulator. It is designed to supply more than 1.5 A of load current with an output voltage adjustable over a 1.2 V to 37 V range. The nominal output voltage is selected by means of only a resistive divider, making the device exceptionally easy to use and eliminating the stocking of many fixed regulators.
Features:
Output voltage range: 1.2 V to 37 VOutput current in excess of 1.5 A0.1 % line and load regulationFloating operation for high voltagesComplete series of protectionscurrent limiting, thermal shutdown and SOA control
PACK OF 100 PIECES
The L78L series of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The L78L series used as Zener diode/resistor combination replacement, offers e improvement along with lower quiescent current and lower noise.
Key Features
Output current up to 100 mA
Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 V thermal overload protection
Short-circuit protection
No external components are required
Available in either ± 4% (A) or ± 8% (C) selection
PACK OF 100 PIECES
The L78L08ACZ is a 3-terminal Positive Regulator with 8V output voltage. It employs internal current limiting and thermal shutdown, making it essentially indestructible. If adequate heat-sink is provided, it can deliver up to 100mA output current. It is intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, it can be used with power pass elements to make high-current voltage regulators. The device used as Zener diode/resistor combination replacement, offers e improvement along with lower quiescent current and lower noise.No external components are requiredShort-circuit protection
Applications:
Power Management, IndustrialWarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
PACK OF 2000 PIECES
The L78L05ACZTR is of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current.They are intended as fixed voltage regulators in a wide range of applications including local or oncard regulation for elimination of noise and distribution problems associated with single-point regulation.
Features:
Output current up to 100 mAOutput voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 VThermal overload protectionShort circuit protectionNo external components are requiredAvailable in either ± 5% (AC) or ± 10% (C) selection
PACK OF 50 PIECES
The L7812CV is a voltage regulator integrated circuit (IC) in the L78 series. It's designed to provide a fixed positive output voltage of 12 volts with a maximum output current of up to 1.5 amperes. This IC is widely used in various electronic applications for providing a stable 12V supply from a higher voltage source. The "CV" suffix typically indicates a standard package type, which in this case is a TO-220 package, known for its ability to handle higher power dissipation.Key features of the L7812CV include thermal overload protection and short-circuit protection, ensuring the stability and reliability of the device under various conditions. Its ability to provide a stable output voltage despite fluctuations in the input voltage or load conditions makes it a popular choice in power supply design for consumer electronics, computer hardware, and other electronic projects.
PACK OF 50 PIECES
The L7809CV is a three-terminal positive regulators is available in TO-220, TO-220FP, TO-3, D²PAK and DPAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible.If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.
Features:
Output current up to 1.5 AOutput voltages of 5, 6, 8, 8.5, 9, 12, 15, 18, 24 VThermal overload protectionShort circuit protectionOutput transition SOA protection2 % output voltage tolerance (A version)Guaranteed in extended temperature range (A version)
PACK OF 50 PIECES
Linear regulators are Step-Down regulators only. There are 2 types of regulators, Shunt and series-pass regulators.For IC linear voltage regulators, the regulator type determines the configuration of the pass device as well as the dropout voltage. Standard voltage regulators use an NPN Darlington configuration and have a dropout voltage between 1.5V and 2.2 V. Low dropout (LDO) regulators differ from standard regulators in that the pass device consists of a single PNP transistorLinear regulators provide significant advantages over switching regulators in simplicity, cost, and output noise.The only difference between a 'normal' linear regulator and a LDO one is that, the LDO type can have a lower constant voltage-drop across the series-pass element.The L78xx series of three-terminal positive regulators is available in TO-220, TO-220FP, TO-3, D2PAK and DPAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.The ST Micro L7805ACV is a 5 volt positive linear regulator. It has 1 amperage, a 4% tolerance, commercial temperature, and comes in a TO-220 package.
PACK OF 50 PIECES
The Liner regulator IC is packaged in TO-204AA, TO-3 case. On the Linear IC itself, there are 3 terminations. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Through Hole operating temperature range by the Voltage Regulator IC. Default settings are set to 0°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There are a total of 2 pins on this board. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 3 pins. For your information, the basic part number for this regulator IC is L7805. In order to meet the operation requirements, its maximal output current reaches 1.5A. It operates in the 8mA Quiescent Current state. This IC regulator has a tolerance of 5%, which is quite low.L7805CT Features2V dropout voltage5% tolerance
Applications:
Battery-powered deviceCommunication devicePersonal communication devicePortable telephoneElectronic notebookCameraVideo equipmentCPU power supplySwitching regulatorMultiple-power supply system
