PACK OF 5000 PIECES
This 150 Ohm SMD resistor is a high-precision component with a 1% tolerance, housed in a 1206 size package. It's commonly used in electronic circuits where precise resistance is required to set accurate biasing currents or to create specific voltage drops. Its precision makes it valuable in audio applications for maintaining signal integrity and in communication devices where it can help to reduce signal reflections. The resistor's size is conducive to automated SMT processes, making it a preferred choice for high-density electronic devices that require precision and reliability.
PACK OF 5000 PIECES
This 12 Ohm resistor in a 1206 SMD package is a high-precision component with a power rating of 1/4 watt, indicating its capacity to dissipate heat effectively. The 1% tolerance assures its use in precision applications where specific low-resistance values are crucial, such as in current sensing for power supplies or in the load side of power amplifiers. Despite its small size, the 1206 footprint allows for sufficient power handling and is suitable for compact circuit designs that require precise low-resistance components.
PACK OF 5000 PIECES
With its precision 1% tolerance, this 120 Ohm resistor in the 1206 package size is a versatile component, often used in telecommunications for impedance matching, minimizing signal reflection. It is also a common choice for current limiting in LED applications, ensuring uniform brightness and protecting the diodes from current surges. The 1206 size makes it suitable for automated assembly and applications where space-saving without compromising on quality is essential.
PACK OF 5000 PIECES
The 10k Ohm SMD resistor with a 1% tolerance, packaged in a 1206 size, is a standard component for pull-up or pull-down networks in digital circuits, providing stability to the logic levels. This high-resistance value is also fundamental in voltage dividers and feedback networks in analog circuits where precision is vital. The 1% tolerance reflects its high-precision manufacturing for consistent performance in both analog signal processing and digital interfaces.
PACK OF 5000 PIECES
This 100 Ohm precision resistor, contained within a 1206 size SMD package, is designed for use in a variety of applications, including timing circuits and precision filters, where its accuracy can significantly affect the operation of the circuit. The 1% tolerance is indicative of its suitability for sensitive applications, ensuring minimal resistance deviation under different environmental conditions. It is also frequently used for current limiting purposes in circuits with strict power or thermal constraints.
PACK OF 5000 PIECES
The 0 Ohm resistor, often referred to as a zero-ohm jumper, is used in a 1206 SMD package to connect traces on a printed circuit board within a surface-mount configuration. While it is classified with a 1% tolerance, its primary function is to act as a jumper, providing a means of creating PCB trace connections in a highly automated manufacturing environment. This component is essential in simplifying complex PCB designs while maintaining the integrity of the surface-mount assembly process.
PACK OF 5000 PIECES
The 560 Ohm resistor in a 1206 SMD package is a precise component with a 1% tolerance, frequently employed in electronic circuits for its accuracy, such as in analog-to-digital converters as part of the reference voltage network. This resistance value is also used in biasing transistors and in RC timing circuits where precise timing is key. The 1206 size is chosen for its compactness, allowing for dense PCB layouts without sacrificing the resistor's performance and thermal stability.
PACK OF 5000 PIECES
The CR-05JL7-330K is a surface-mount device (SMD) resistor with an 0805 package size. It has a resistance value of 330k Ohms (330 kiloohms) and a tolerance of 5%. This resistor is typically used in a variety of electronic circuits for applications such as voltage division, current limiting, and signal conditioning. The 0805 package size is a standard in the industry, offering a good balance between a small footprint and ease of handling and soldering, making it suitable for various electronic circuit designs. The 330k Ohm resistance value is useful in situations where a high resistance is required, such as in timing circuits, voltage monitoring, or as part of the biasing elements in amplifiers and other analog circuits. The 5% tolerance indicates that the actual resistance can vary by up to 5% from the nominal value, which is adequate for many general-purpose applications. The CR-05JL7-330K is designed for reliable performance and stability, making it a versatile component in both consumer and industrial electronics.
PACK OF 5000 PIECES
The CR-05JL7-1K is a surface-mount device (SMD) resistor with an 0805 package size. It has a resistance value of 1k Ohms and a tolerance of 5%. Designed for a wide range of electronic applications, this resistor is commonly used in circuitry for current limitation, voltage regulation, and signal conditioning. The 0805 package size is one of the most commonly used sizes for SMD resistors, balancing compactness with ease of handling and soldering, making it ideal for use on standard-density printed circuit boards (PCBs). The 1k Ohm resistance value is a standard and versatile value, suitable for both digital and analog circuit designs. The 5% tolerance indicates a general-purpose level of precision, suitable for a broad array of applications where exact resistance values are not critical. The CR-05JL7-1K resistor is appreciated for its reliability, durability, and consistent performance, which are essential for maintaining the stability and functionality of electronic devices and systems.
PACK OF 5000 PIECES
The CR-05JL7-10K is a surface-mount device (SMD) resistor with an 0805 package size. This resistor has a value of 10k Ohms and a tolerance of 5%. The 0805 size is a standard footprint in the industry, providing a good balance between small size and ease of handling, making it suitable for various electronic circuit designs. The 10k Ohm resistance value is one of the most commonly used in electronics, particularly for pull-up/pull-down resistors in digital circuits, voltage division, and filtering applications. The 5% tolerance indicates that the actual resistance can vary by up to 5% from the 10k Ohm nominal value, which is suitable for a wide range of general-purpose applications. The CR-05JL7-10K is designed for reliable performance and stability, making it a versatile component in both consumer and industrial electronics.
PACK OF 5000 PIECES
The CR-05JL7-100R is a surface-mount device (SMD) resistor with a standard 0805 package size. It has a resistance value of 100 Ohms (indicated as '100e' or '100R') and a tolerance of 5%. This resistor is commonly used in electronic circuits for various applications, including controlling current flow, voltage division, and signal conditioning. The 0805 package size is popular in the electronics industry due to its small footprint and ease of soldering, making it suitable for use on a variety of printed circuit board (PCB) densities. The 100 Ohm resistance value is a common choice for many circuit designs, particularly where low resistance values are required, such as in current sensing applications or as part of filter circuits. The 5% tolerance level indicates a standard precision, appropriate for a broad range of general-purpose applications. The CR-05JL7-100R is known for its reliability and consistent performance, making it a versatile component in both consumer and industrial electronic devices.
PACK OF 5000 PIECES
The CR-05JL7-100K is a surface-mount device (SMD) resistor in the widely used 0805 package size. It features a resistance value of 100k Ohms (100 kiloohms) and a tolerance of 5%. This type of resistor is commonly used in various electronic circuits for functions like voltage division, current limiting, and signal conditioning. The 0805 package is a standard size for SMD resistors, offering a balance between small footprint and ease of soldering, suitable for a range of printed circuit board (PCB) densities. The 100k Ohm resistance value is particularly useful in applications requiring high resistance, such as in timing circuits, pull-up/pull-down resistors for logic levels, or in sensor interfaces. The 5% tolerance indicates a general-purpose level of accuracy, making this resistor appropriate for a wide array of applications where precise resistance values are not critical. The CR-05JL7-100K is designed for reliable and consistent performance, essential for maintaining the integrity of electronic devices and systems.
PACK OF 5000 PIECES
The CR-03JL7 4K7 is a surface-mount device (SMD) resistor with a 0603 package size. It has a resistance value of 4.7k Ohms (4k7) and a tolerance of 5%. This resistor is designed for use in various electronic circuits, serving functions such as controlling current flow, adjusting signal levels, and voltage division. The 0603 package size is small yet manageable for surface-mount technology, making it suitable for densely populated printed circuit boards (PCBs) in both consumer and industrial electronic devices. The 4.7k Ohm resistance value is commonly used in many electronic applications, providing a versatile balance for circuit design needs. The 5% tolerance indicates a standard level of precision, which is adequate for general-purpose applications. The CR-03JL7 4K7 resistor is valued for its reliability and consistent performance, necessary for maintaining the integrity and efficiency of electronic circuits.
PACK OF 5000 PIECES
The CR-02JL6-4K7 is a surface-mount device (SMD) resistor with a compact 0402 package size. It has a resistance value of 4.7k Ohms and a tolerance of 5%. This type of resistor is commonly used in electronic circuitry for controlling current flow, voltage division, and signal conditioning. The 0402 package size is one of the smallest available, making it ideal for use in densely packed printed circuit boards (PCBs) where space is at a premium. The 4.7k Ohm resistance is useful in a wide range of applications, from digital and analog circuits to communication devices. The 5% tolerance indicates a moderate level of precision, suitable for general-purpose applications. The CR-02JL6-4K7 resistor is valued for its reliability, consistency, and its ability to withstand the environmental and thermal stresses typical in electronic devices.
PACK OF 5000 PIECES
The CR-02JL6-10K is a surface-mount device (SMD) resistor in a 0402 package size, featuring a resistance value of 10k Ohms with a 5% tolerance. This compact resistor is commonly used in a variety of electronic circuits for applications such as current limiting, voltage division, and signal conditioning. The 0402 package size is very small, making it ideal for space-constrained applications on densely populated printed circuit boards (PCBs). The 10k Ohm resistance value is a standard value used in electronic designs, offering versatility in both digital and analog circuitry. The 5% tolerance provides a balance between precision and cost-effectiveness, making this resistor suitable for general-purpose use. The CR-02JL6-10K is known for its reliability and stability, essential in maintaining consistent performance in electronic devices.
