The LM386N-1/NOPB is a low voltage class AB audio power amplifier in 8 pin DIP package. This power amplifier is designed for use in low voltage applications. The gain is internally set to 20 to keep external part count low. The addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground referenced while output automatically biases to one half cycle of supply voltage. The quiescent power drain is only 24mW when operating from 6V supply making LM386 ideal for battery operation.
Minimum external parts
Wide supply voltage range from 4V to 12V
Low quiescent current drain of 4mA
Self centring output quiescent voltage
Low distortion of 0.2%
Operating temperature range 0°C to 70°C
Output power is 325mW at VS=6V and RL=8W
Voltage gain is 26db at VS=6V and f=1KHz
Bandwidth (BW) of 300KHz
Power supply rejection ratio (PSRR) is 50dB
Applications:
Audio, Portable Devices, Consumer Electronics, Power Management, Signal Processing
PACK OF 100 PIECES
The S1035-2 30AMP is an automotive fuse specifically designed with a current rating of 30 amperes (Amps). This fuse is tailored for use in automotive electrical systems, where it plays a crucial role in protecting circuits from excessive current that could potentially cause damage or pose safety hazards. The 30 Amp rating indicates this fuse's ability to safely handle significant current loads before blowing or interrupting the circuit, thus preventing further damage and maintaining the safety of the vehicle's electrical system.
Current Rating (30Amps): The 30 Amp rating is ideal for automotive circuits that demand a high level of current protection. This rating is typically associated with more power-intensive systems within vehicles, such as cooling fans, towing electrical circuits, or certain types of pumps.
Automotive Application: Constructed to endure the rigorous conditions typical in vehicle environments, including vibrations, temperature variations, and other automotive-specific challenges.
Model (S1035-2 30AMP): The model number S1035-2 30AMP precisely identifies the fuse's specifications, ensuring correct application and compatibility within automotive electrical systems.
Safety and Protection: Automotive fuses like the S1035-2 30AMP are essential for vehicle safety, effectively protecting electrical circuits from overcurrent scenarios that could lead to overheating, wiring damage, or even fires.
Applications: Widely used in various automotive electrical systems where a high level of current protection is necessary. Suitable for diverse types of vehicles, including cars, trucks, and other vehicles with electrical systems operating at or below 30 Amps.
Features: Recognized for its high current rating and durability under automotive conditions, the S1035-2 30AMP fuse is designed to provide reliable and effective circuit protection in various automotive applications.
In summary, the S1035-2 30AMP automotive fuse is an integral safety component for vehicles, effectively safeguarding automotive electrical systems against overcurrent risks. It ensures reliable protection in circuits handling up to 30 Amps, crucial for the proper functioning and safety of various automotive electrical systems.
PACK OF 100 PIECES
The S1035-2 is an automotive fuse with a current rating of 10 amperes (Amps). Designed specifically for use in automotive electrical systems, this fuse is essential for protecting circuits against excessive current which could otherwise cause damage or potential safety hazards. The 10 Amp rating indicates the maximum current the fuse can safely handle before it blows or interrupts the circuit, thereby preventing further damage and ensuring safe operation of the vehicle's electrical system.
Current Rating (10Amps): The 10 Amp rating is appropriate for automotive circuits requiring a moderate level of current protection. This is typical for various systems within vehicles such as interior lighting, infotainment systems, or other auxiliary circuits.
Automotive Application: Designed specifically for automotive use, meaning it is built to endure the conditions typical in vehicle environments, including vibrations and temperature variations.
Model (S1035-2): The model number S1035-2 precisely identifies the fuse's characteristics, ensuring the correct selection for compatibility with specific automotive electrical systems.
Safety and Protection: Automotive fuses like the S1035-2 play a critical role in safety, safeguarding electrical circuits from overcurrent situations that can lead to overheating, wire damage, or even fires.
Applications: Commonly used in a variety of automotive electrical systems where specific current protection is crucial. Suitable for cars, trucks, and other vehicles with electrical systems operating at or below 10 Amps.
Features: Known for its specific current rating and durability under automotive conditions, the S1035-2 fuse is designed to provide effective and reliable circuit protection in a range of automotive settings.
In summary, the S1035-2 automotive fuse, with its 10Amp current rating, is an essential safety component in vehicles, offering effective protection for automotive electrical systems against the risks associated with overcurrent.
PACK OF 100 PIECES
The S1035-2 15AMP is an automotive fuse designed with a current rating of 15 amperes (Amps). It is specifically tailored for use in automotive electrical systems, providing essential protection against excessive current that could potentially cause damage or pose safety hazards. The 15 Amp rating indicates the maximum current that the fuse can handle safely before it blows or interrupts the circuit, thereby preventing further damage.
Current Rating (15Amps): The 15 Amp rating is suitable for automotive circuits that require moderate to high current protection. This rating is common in systems within vehicles, such as engine controls, lighting, and accessory circuits.
Automotive Application: Constructed for use in automotive environments, meaning it is built to endure typical conditions found in vehicles, including vibrations, temperature fluctuations, and other harsh elements.
Model (S1035-2 15AMP): The model number S1035-2 15AMP accurately specifies the fuse's characteristics, ensuring correct application and compatibility with specific automotive electrical systems.
Safety and Protection: Automotive fuses, like the S1035-2 15AMP, play a critical role in vehicle safety, protecting electrical circuits from overcurrent situations that might lead to overheating, wire damage, or potential fires.
Applications: Widely used in various automotive electrical systems where a specific level of current protection is needed. Suitable for different types of vehicles, including cars, trucks, and other motor vehicles with electrical systems operating at or below 15 Amps.
Features: Recognized for its specific current rating and durability under automotive conditions, the S1035-2 15AMP fuse is designed to provide effective and reliable circuit protection in various automotive settings.
In summary, the S1035-2 15AMP automotive fuse is a crucial component for vehicles, offering effective protection for automotive electrical systems by safely interrupting circuits in overcurrent situations.
PACK OF 100 PIECES
The S1035-2 20AMP is an automotive fuse designed with a current rating of 20 amperes (Amps). This fuse is specifically tailored for use in automotive electrical systems to protect circuits against excessive current, which can cause damage or potential hazards. The 20 Amp rating indicates the maximum current the fuse can safely handle before it blows or interrupts the circuit, thereby preventing further damage and ensuring the safety of the vehicle's electrical system.
Current Rating (20Amps): The 20 Amp rating is suitable for automotive circuits requiring a higher level of current protection. This is typical for systems within vehicles that demand more power, such as air conditioning systems, larger lighting circuits, or power outlets.
Automotive Application: Designed specifically for automotive use, it is built to withstand the conditions typical in vehicle environments, including vibrations, temperature variations, and other challenging conditions.
Model (S1035-2 20AMP): The model number S1035-2 20AMP precisely identifies the fuse's characteristics, ensuring the correct selection for compatibility with specific automotive electrical systems.
Safety and Protection: Automotive fuses like the S1035-2 20AMP play a critical role in vehicle safety, safeguarding electrical circuits from overcurrent situations that can lead to overheating, wiring damage, or even fires.
Applications: Commonly used in various automotive electrical systems where specific current protection is crucial. Suitable for a wide range of vehicles, including cars, trucks, and other motor vehicles with electrical systems operating at or below 20 Amps.
Features: Known for its specific current rating and robustness under automotive conditions, the S1035-2 20AMP fuse is designed to provide effective and reliable circuit protection in a variety of automotive settings.
In summary, the S1035-2 20AMP automotive fuse is an essential safety component for vehicles, offering robust protection for automotive electrical systems by safely interrupting circuits in overcurrent situations.
PACK OF 100 PIECES
The S1035-2 25AMP is an automotive fuse with a current rating of 25 amperes (Amps). This fuse is specifically designed for use in automotive electrical systems to protect circuits against excessive current which can cause damage or potential hazards. The 25 Amp rating indicates the maximum current the fuse can safely handle before it blows or interrupts the circuit, preventing further damage.
Current Rating (25Amps): The 25 Amp rating is suitable for automotive circuits requiring a moderate level of current protection. This rating is common in various systems within vehicles, such as lighting, audio, or auxiliary outlets.
Automotive Application: The fuse is designed for automotive use, meaning it is built to withstand the vibrations, temperature variations, and other conditions typical in vehicle environments.
Model (S1035-2 25AMP): The model number S1035-2 25AMP accurately specifies the fuse's characteristics, ensuring the correct selection for compatibility with specific automotive electrical systems.
Safety and Protection: Fuses like the S1035-2 25AMP are critical for automotive safety, protecting electrical circuits from overcurrent that can lead to overheating, wiring damage, or even fires.
Applications: Commonly used in various automotive electrical systems where specific current protection is needed. It's suitable for cars, trucks, and other vehicles with electrical systems operating at or below 25 Amps.
Features: Known for its specific current rating and durability in automotive conditions, the S1035-2 25AMP fuse is designed to provide reliable circuit protection under typical operating conditions in vehicles.
In summary, the S1035-2 25AMP automotive fuse is a crucial safety component for vehicles, offering effective protection for automotive electrical systems by safely interrupting circuits in overcurrent situations.
PACK OF 2500 PIECES
The C0805C104K1RAC A is an automotive grade surface-mount device (SMD) ceramic capacitor housed in an 0805 package. It features a capacitance of 0.1 microfarads (µF) and a voltage rating of 100 volts DC (VDC). Utilizing the X7R dielectric material, this capacitor offers stable electrical characteristics over a wide temperature range. With a tolerance of ±10%, it is specifically designed to meet the rigorous standards of automotive applications.
Capacitance (0.1µF): The 0.1 microfarad capacitance is suitable for a variety of general-purpose electronic applications, including filtering, decoupling, and smoothing circuits.
Voltage Rating (100VDC): The 100VDC rating makes this capacitor suitable for higher voltage applications, providing ample voltage headroom for automotive and industrial applications.
Dielectric (X7R): The X7R dielectric material is characterized by its stability over a broad temperature range, making it suitable for automotive and other demanding applications where temperature variations are common.
Tolerance (±10%): The 10% tolerance indicates an acceptable range of capacitance variation, suitable for a variety of applications where some variation is permissible.
Package (0805 SMD): The 0805 package is a standard size in the electronics industry, facilitating integration into various automotive electronic devices and circuit boards.
Automotive Grade: This capacitor is designed to meet the stringent quality and reliability standards required in automotive applications.
Model (C0805C104K1RAC A): The model number C0805C104K1RAC A accurately specifies the capacitor's characteristics, ensuring appropriate selection and compatibility in automotive electronics.
Applications: Commonly used in automotive electronics, power supply circuits, and other applications where high reliability and stability are required.
In summary, the C0805C104K1RAC A is an automotive grade ceramic capacitor in an 0805 SMD package, offering a capacitance of 0.1µF with a 100VDC voltage rating and an X7R dielectric. Its 10% tolerance and robust design make it well-suited for automotive and other demanding applications requiring high reliability and stability.
PACK OF 4000 PIECES
This is an automotive grade ceramic capacitor designed for high-reliability applications in the automotive industry. With a capacitance value of 1000 picofarads (pF), equivalent to 1 nanofarad (1nF), and a voltage rating of 100 volts DC (VDC), it is suitable for various electronic circuits in automotive environments. The capacitor utilizes an X7R dielectric material, which provides stable electrical characteristics over a wide temperature range. It has a tolerance of ±10%, making it a reliable choice for applications where precision and durability are crucial.
Capacitance (1000pF/1nF): The 1000 picofarad (1 nanofarad) capacitance is ideal for a range of electronic applications, particularly in filtering, timing, and frequency control circuits.
Voltage Rating (100VDC): The 100VDC rating allows for usage in automotive and industrial electronic circuits that operate at higher voltages.
Dielectric (X7R): The X7R dielectric material is characterized by its stability across a broad temperature range, making it suitable for applications with varying temperature conditions, common in automotive environments.
Tolerance (±10%): The 10% tolerance provides a balance of precision and flexibility, accommodating the needs of various electronic circuits.
Automotive Grade: Designed to meet stringent automotive industry standards, this capacitor offers enhanced reliability and durability under harsh conditions, including vibrations and temperature fluctuations.
Applications: Commonly used in automotive electronics, including engine control units, infotainment systems, and safety mechanisms, as well as in power supply circuits and other high-reliability applications.
In summary, this automotive grade ceramic capacitor, with a capacitance of 1000pF (1nF), a 100VDC voltage rating, and an X7R dielectric, is highly suitable for automotive applications requiring robust, stable, and reliable capacitive components. Its 10% tolerance makes it versatile for various electronic systems within the automotive sector.
PACK OF 10 PIECES
The TRP-12VDC-AC8 is an automotive open relay designed to operate with a 12-volt DC coil (12VDC) and capable of handling high current loads up to 45 amperes. This type of relay is commonly used in automotive applications for controlling various high-power functions such as lighting systems, starter motors, and other electrical components within the vehicle.
Key Features and Benefits:
12VDC Coil Voltage: Compatible with standard automotive electrical systems, making it suitable for a wide range of vehicles.
High Current Capacity (45Amp): Capable of controlling high-power automotive electrical components, which is essential for various automotive systems like lighting, engine starters, and more.
Open Relay Design: The open design allows for better heat dissipation and easier inspection of the relay's condition, which is beneficial in automotive environments where reliability is critical.
Versatile Automotive Applications: Can be used in various automotive systems that require robust and reliable switching of high-current circuits.
Durable and Reliable: Engineered to withstand the challenging conditions of automotive environments, including vibrations, temperature fluctuations, and electrical noise.
Model (TRP-12VDC-AC8): The specific model number ensures easy identification and procurement, facilitating accurate component selection for automotive repairs and maintenance.
In summary, the TRP-12VDC-AC8 automotive open relay, with its 12VDC coil and 45Amp switching capacity, is a robust and versatile component suitable for a wide range of high-current automotive applications. Its open design and compatibility with automotive systems make it a reliable choice for controlling various electrical components in vehicles.
PACK OF 10 PIECES
The TRP-12VDC-SC-C8 is an automotive relay designed to operate at a coil voltage of 12 volts DC (12VDC) and is capable of switching currents up to 45 amperes. This relay, also referenced as model 981-01-21, is tailored for automotive applications where high current switching is required, such as in vehicle lighting systems, starters, and other heavy-duty electrical components.
Key Features and Benefits:
12VDC Coil Voltage: Compatible with standard automotive electrical systems, making it suitable for a wide range of vehicles.
High Current Capacity (45Amp): Capable of handling high-current applications, which is essential for controlling powerful automotive electrical components.
Automotive Applications: Ideal for use in various automotive systems, including engine control, lighting, starters, and other electrical systems requiring robust switching capabilities.
Durable and Reliable: Designed to withstand the harsh conditions of automotive environments, including vibrations, temperature variations, and humidity.
Compact Design: Its size allows for easy integration into automotive electrical systems, even in space-constrained areas.
Model (TRP-12VDC-SC-C8 / 981-01-21): The specific model numbers ensure easy identification and compatibility, simplifying the replacement process and ensuring correct part selection for automotive repairs and maintenance.
In summary, the TRP-12VDC-SC-C8 automotive relay, also known as model 981-01-21, with its 12VDC coil and 45Amp switching capacity, is a robust and reliable choice for high-current automotive applications. Its suitability for the demanding conditions of automotive systems makes it an essential component for vehicle electrical and control systems.
The C410C472M5R5CA is an axial monolithic ceramic capacitor featuring a capacitance value of 4.7 kilopicoFarads (4700pF or 0.0047µF) with a voltage rating of 50 volts DC (VDC). This capacitor is part of the X7R dielectric category, which is known for its stable performance and reliability over a wide range of temperatures. It also comes with a 20% tolerance, which implies a moderate level of precision in maintaining its capacitance value.
Key Features and Benefits:
Capacitance (4.7k/4700pF): The 4.7 kilopicoFarads (4700pF) capacitance is suitable for various applications, including filtering, bypassing, and coupling. This value is particularly useful in timing and frequency control circuits where specific capacitance values are critical.
Voltage Rating (50VDC): The 50 volts DC rating makes this capacitor suitable for medium-voltage applications, providing flexibility in a broad range of electronic circuits.
Dielectric (X7R): The X7R dielectric material ensures great stability across a significant temperature range, making the capacitor a reliable option for varying environmental conditions and applications. It maintains its capacitance with minimal fluctuation under temperature variations.
Tolerance (20%): A tolerance of 20% indicates that the actual capacitance can vary by this percentage from its nominal value, offering adequate precision for general electronic applications.
Axial Design: The axial lead design facilitates easy mounting and wiring in through-hole circuit board applications, enhancing practicality for both prototyping and mass production.
In summary, the C410C472M5R5CA axial monolithic ceramic capacitor is a dependable and versatile component, ideal for applications that require specific capacitance values with moderate tolerance. Its 4700pF capacitance, 50VDC rating, and X7R dielectric, combined with a 20% tolerance, make it suitable for a wide range of electronic applications, especially where stability and reliability are key.
PACK OF 2500 PIECES
The C410C471M5R5CA is an axial monolithic ceramic capacitor, characterized by a capacitance value of 470 picofarads (pF) and a voltage rating of 50 volts DC (VDC). It is classified under the X7R dielectric category, renowned for its excellent stability and reliability across a broad temperature range. The capacitor features a 20% tolerance, indicating a moderate level of precision in maintaining its specified capacitance value.
Key Features and Benefits:
Capacitance (470pF): The 470 picofarad capacitance is ideal for various electronic applications, including RF coupling, tuning circuits, and timing applications. This value is particularly useful in circuits where precise capacitance is necessary for frequency control.
Voltage Rating (50VDC): With a voltage rating of 50 volts DC, this capacitor is suitable for medium-voltage applications, making it versatile for use in a wide range of electronic circuits.
Dielectric (X7R): The X7R dielectric material is known for its robust performance over a wide temperature range, ensuring reliable capacitor operation in different environmental conditions. It maintains its capacitance with minimal variation in temperature fluctuations.
Tolerance (20%): A tolerance of 20% suggests that the actual capacitance can vary by this amount from its nominal value, offering sufficient precision for general electronic applications.
Axial Design: The axial lead design of this capacitor facilitates easy mounting and wiring in through-hole circuit board applications, making it a practical choice for both prototyping and production.
In summary, the C410C471M5R5CA axial monolithic ceramic capacitor is an effective and reliable component for a variety of electronic applications. Its 470pF capacitance, 50VDC rating, X7R dielectric, and 20% tolerance make it a suitable choice for numerous applications, especially in areas requiring stable and moderately precise capacitive elements.
PACK OF 100 PIECES
The BC337-40 is a bulk NPN bipolar junction transistor (BJT) housed in a TO-92 package. This transistor is capable of handling collector currents up to 800mA, making it suitable for medium-power applications. It can withstand collector-to-emitter voltages up to 45V, providing versatility in various circuit designs. The hFE (current gain) of this transistor ranges from 250 to 600, indicating its efficiency in amplifying current. The BC337-40 is widely used in general-purpose amplification and switching applications. Its TO-92 package is a standard, through-hole mounting design, which is commonly used in a variety of electronic circuits. Due to its high current and voltage handling capabilities, along with a significant gain factor, this transistor is a popular choice in audio amplifiers, signal processing, and power management circuits.
PACK OF 100 PIECES
The BC547A is an NPN bipolar junction transistor (BJT) encapsulated in a TO-92 package. It is designed to handle a collector current of up to 100mA, making it suitable for low-power applications. The transistor can withstand a collector-to-emitter voltage of up to 45V, allowing for flexibility in various circuit implementations. The hFE, or current gain, ranges from 110 to 220, indicating its capacity to amplify a signal. The BC547A is commonly used in general-purpose amplification and switching applications, particularly where low current and moderate voltage are involved. Its TO-92 package is a widely used, through-hole mounting design, favored for its ease of handling and integration into a range of electronic circuits. This transistor is particularly popular in audio amplifiers, signal processing, and control circuits, thanks to its reliable performance and efficient current amplification capabilities.
PACK OF 100 PIECES
The Black Plastic Cable Tie, identified by the part number 513 908 024, is a versatile and widely used fastening tool in various applications. These cable ties are made from durable plastic, ensuring strength and longevity. They are designed to bundle and secure wires, cables, and other objects efficiently. The black color provides UV resistance, making them suitable for outdoor use as it minimizes degradation from sunlight exposure. These ties are easy to use; they lock securely and can only be removed by cutting. They are commonly used in electrical installations, cable management in IT environments, securing items in automotive applications, and general organizational tasks in both commercial and residential settings.
PACK OF 100 PIECES
The BP105 Bond Ply Sheet, part of the 11X00 series, measures 28cm in length and 30cm in width. This product is a type of bonding ply, commonly used in electronic and mechanical applications for thermal management and as an interface material. The BP105 series is known for its excellent thermal conductivity and electrical insulating properties, making it ideal for use in situations where efficient heat transfer and electrical isolation are required. The sheet's dimensions of 28cm x 30cm make it suitable for a range of applications, including mounting semiconductor devices, LED arrays, and other electronic components that generate heat. The bond ply is designed to be easy to handle and apply, and its size can be customized for specific requirements in various industrial and commercial applications. Its robust construction ensures durability and reliability in challenging environments.
PACK OF 100 PIECES
The Bond Ply BP105-43 is a thermal adhesive material designed for efficient thermal management in electronic assemblies. It is typically used to bond heat-generating components to heat sinks or other cooling devices, facilitating improved heat dissipation and maintaining optimal operating temperatures for electronic components.
Key Features and Benefits:
Effective Thermal Conductivity: The BP105-43 is engineered to conduct heat effectively away from electronic components, aiding in cooling and reducing the risk of overheating.
Adhesive Properties: This material not only transfers heat efficiently but also serves as an adhesive, creating a secure bond between components and heat sinks without the need for mechanical fasteners.
Ease of Application: The BP105-43 is designed for straightforward application, often available in pre-cut shapes or sheets that can be easily applied to components, simplifying the assembly process.
Electrical Isolation: Besides thermal conduction, it typically provides electrical isolation, crucial in preventing electrical shorts and safeguarding sensitive electronics.
Versatile Use: Suitable for a wide range of electronic applications, including power transistors, CPUs, LED lighting, and other heat-generating electronic components.
Model (BP105-43): The specific model number allows for precise identification, ensuring compatibility and effectiveness for specific thermal management requirements in electronic assemblies.
In summary, the Bond Ply BP105-43 thermal adhesive material is a vital component in electronic manufacturing and assembly, offering efficient heat conduction, adhesive bonding, and electrical isolation. Its application is crucial in enhancing the reliability and performance of electronic devices by ensuring effective thermal management.
PACK OF 50 PIECES
The DG305-5.0-03P-12 is a PCB (Printed Circuit Board) terminal block with 3 poles, designed for electrical connections in a variety of applications. This terminal block features a blue housing, a voltage rating of 300 volts, and a current rating of 15 amperes. The design facilitates easy and secure wire connections and is commonly used in control systems, power distribution, and other electrical installations.
Number of Poles (3 Poles): This terminal block has 3 poles, enabling the connection of three individual wires, suitable for applications requiring more complex circuit connections.
Voltage and Current Rating (300V 15A): With a voltage rating of 300 volts and a current rating of 15 amperes, the terminal block can handle a range of electrical power requirements, making it versatile for both medium-voltage and medium-current applications.
Color (Blue): The blue color of the terminal block provides clear visual identification, which can be beneficial in complex wiring configurations.
Model (DG305-5.0-03P-12): The model number DG305-5.0-03P-12 accurately specifies the terminal block's characteristics, ensuring the correct application and compatibility in various electrical systems.
Applications: Commonly used in industrial controls, power supply units, electrical panels, and other areas where reliable and organized wire-to-board connections are required.
Features: Known for its compact design, medium voltage and current capacity, and ease of use, the DG305-5.0-03P-12 terminal block is designed for efficient and reliable electrical connections in a variety of settings.
In summary, the DG305-5.0-03P-12 terminal block, with its 3 poles, blue color, and 300V 15A capacity, is an essential component for establishing secure and efficient electrical connections in a range of electronic systems and applications.
PACK OF 50 PIECES
The Bourns 1k Ohm Potentiometer, Model 3318K-1-102A, is a precision rotary potentiometer designed for various electronic applications. This potentiometer has a resistance value of 1k Ohms and is commonly used for adjusting voltage, controlling signal levels, or tuning circuits. The '102' in the model number indicates the resistance value (1k Ohm), and the 'A' typically signifies the taper or characteristic of the potentiometer, which in most cases would be linear. This particular model, 3318K, is part of Bourns' range of compact and reliable potentiometers, known for their durability and accuracy. It is suitable for applications such as audio equipment, instrumentation, and control systems where precise and smooth adjustment of electrical parameters is required. The potentiometer's compact size and robust design make it a popular choice among professionals and hobbyists alike.
PACK OF 50 PIECES
The Bourns 50k Ohm Potentiometer, Model 3318K-1-503A, is a high-quality rotary potentiometer designed for a variety of electronic applications. This particular model has a resistance value of 50k Ohms, making it suitable for tasks such as controlling signal levels, adjusting voltages, or fine-tuning circuits. The '503' in the model number signifies the resistance value (50k Ohm), and the 'A' typically indicates the taper of the potentiometer, which is usually linear. Part of Bourns' renowned series of compact and reliable potentiometers, this model is known for its precision and durability. It is commonly used in applications like audio systems, instrumentation, and control panels where accurate and smooth adjustments of electrical parameters are crucial. The 3318K series potentiometers are favored for their compact size, robust construction, and consistent performance, appealing to both professional engineers and electronics hobbyists.
PACK OF 50 PIECES
The BTA06-600TRG is a triac, a type of semiconductor device widely used in AC power control applications. It's designed to switch and control high-current AC loads, offering a maximum current rating of 6 amperes and a peak off-state voltage of 600 volts. This makes it suitable for handling moderate power levels in applications such as motor control, lighting dimming, and heating regulation.One of the key features of the BTA06-600TRG is its gate trigger voltage, which is low enough to be easily driven by microcontrollers and other low-power control circuits, facilitating its integration into digital control systems. The "TRG" suffix typically indicates specific packaging and series details; in this case, it is likely to represent a particular form factor or series within the BTA06 range.The device comes in a TO-220 package, known for its good thermal properties, making it capable of handling higher power dissipation without overheating. It's also designed with robustness in mind, featuring high surge current capability and immunity to dV/dt, ensuring reliable performance in environments with electrical noise and fluctuations.Ideal for both commercial and domestic AC power control applications, the BTA06-600TRG combines efficient power handling with ease of control, making it a versatile choice for designers and engineers working on AC power systems.
PACK OF 20 PIECES
The ULN2803AN is a Darlington Transistor Array. It is a high-voltage, high-current Darlington transistor array that can be used to drive a variety of loads. It is designed to provide a low-cost, easy-to-use solution for driving high-current loads from low-voltage logic circuits.Features• High-voltage, high-current Darlington transistor array• Low-cost, easy-to-use solution for driving high-current loads from low-voltage logic circuits• Eight NPN Darlington pairs with common emitters• Output current of 500mA (single output)• Output voltage of 50V• Inputs compatible with TTL and CMOS logic• Internal clamp diodes for inductive loads• High-noise immunityApplicationThe ULN2803AN is suitable for a wide range of applications, including motor control, relay drivers, lamp drivers, and other high-current loads. It is also suitable for use in automotive, industrial, and consumer applications.
Transistor Polarity:NPN; Transistors, No. of:8; Collector-to-Emitter Breakdown Voltage:50V; Current Ic Continuous a Max:0.5A; Termination Type:SMD; Case Style:DIP; No. of Pins:18; Operating Temperature Range:-40°C to +85°C; Base Number:2803; IC Generic Number:2803; Logic Function Number:2803; Max Output Current:500mA; Output Type:Open Collector; Transistor Type:Power Darlington; Voltage, Input Max:5V; Voltage, Output Max:50V
COST PER PIECE
This evaluation board, the IQS621EV01, is designed to demonstrate and test a range of sensor technologies including capacitive, proximity, Hall Effect, inductive, and ambient light sensing (ALS), all integrated with an I2C communication interface. It's an ideal tool for developers, engineers, and hobbyists to explore and understand the functionalities of these diverse sensing technologies in a single platform.Capacitive Sensing: Useful for detecting touch or proximity by measuring changes in an electrical field. Often used in touchscreens and capacitive buttons.Proximity Sensing: Employs various methods to detect the presence or distance of an object relative to the sensor, commonly used in user interface applications.Hall Effect Sensing: Detects magnetic fields and is used in applications like position sensing, speed detection, and current sensing.Inductive Sensing: Works on the principle of electromagnetic induction, primarily used to detect metallic objects or measure properties like conductivity.Ambient Light Sensing (ALS): Measures the intensity of the ambient light, often used in applications where automatic adjustment of display brightness or lighting conditions is required.I2C Interface: A widely used communication protocol that allows the sensors to easily interface with microcontrollers or other I2C-compatible devices.The IQS621EV01 board is versatile for testing and experimenting with these sensors in various configurations and applications, making it particularly valuable for prototyping, educational purposes, and in-depth analysis of sensor technology. It's ideal for a wide range of applications, from industrial automation and robotics to consumer electronics and IoT (Internet of Things) devices. The board likely comes with interface software, documentation, and possibly example code, to help users maximize their development and learning experience.
COST PER PIECE
The IQS624EV01 evaluation board is a comprehensive tool designed for testing and demonstrating a variety of sensor technologies including capacitive, proximity, touch, Hall Effect, and inductive sensors, integrated with an I2C communication interface. This board is an excellent resource for engineers, developers, and hobbyists for exploring the capabilities of these sensors in various applications.Capacitive Sensing: This feature allows the detection of touch or proximity by measuring changes in an electrical field, making it ideal for user interface applications like touchscreens.Proximity Sensing: It uses different methods to detect the presence or absence of objects, or their distance from the sensor, useful in a wide range of applications including mobile devices and industrial controls.Touch Sensing: Similar to capacitive sensing but more specifically focused on detecting and responding to physical touches, often used in consumer electronics.Hall Effect Sensing: This sensor detects magnetic fields and is commonly used for position sensing, speed detection, and current sensing applications.Inductive Sensing: Operates on the principle of electromagnetic induction, primarily used for detecting metallic objects or for non-contact switches.I2C Interface: This popular communication protocol enables the sensors to interface seamlessly with microcontrollers or other I2C-compatible devices, simplifying data transfer and device control.The IQS624EV01 is ideal for experimenting with and developing applications that involve a combination of these sensing technologies. It offers a hands-on way to test functionalities, develop software, and understand how these sensors can be integrated into various systems. This board is particularly useful for applications in areas such as automation, interactive devices, and IoT (Internet of Things). The board likely comes with necessary software tools, documentation, and example codes to assist users in effectively utilizing its features.
PACK OF 100 PIECES
The JFB02E103K100000 is a capacitor featuring a capacitance of 0.01 microfarads (uF), a voltage rating of 250 volts, a tolerance of 10%, and a lead spacing (pitch) of 10mm. It's designed for use in a variety of electronic applications where these specific parameters are required.Capacitance (0.01uF): This capacitance value indicates the amount of electric charge the capacitor can store. A 0.01uF capacitor is typically used for noise suppression, signal coupling, and filtering in electronic circuits.Voltage Rating (250V): The high voltage rating of 250 volts means this capacitor can safely operate at or below this voltage level. This makes it suitable for higher voltage applications or for circuits that experience voltage spikes.Tolerance (10%): The tolerance indicates how much the actual capacitance might vary from the rated capacitance. A 10% tolerance is common for general-purpose capacitors, offering a balance between precision and cost-effectiveness.Pitch (10mm): The 10mm pitch, or the distance between the capacitor's leads, is suitable for various PCB layouts and is particularly convenient for spacing requirements in certain designs.Application: The combination of these features makes the JFB02E103K100000 capacitor a versatile component for a wide range of applications, including power supply circuits, audio electronics, and other general-purpose electronic equipment.The capacitor’s design and specifications make it a reliable choice for applications that demand a capacitor with a small capacitance value, high voltage rating, and standard tolerance, all within a design that accommodates a 10mm pitch.
PACK OF 100 PIECES
The JFB02E104K100000 is a capacitor characterized by a capacitance value of 0.1 microfarads (uF), a voltage rating of 250 volts, a tolerance of 10%, and a lead spacing or pitch of 10mm. This capacitor is designed for various electronic applications that require these specific parameters.Capacitance (0.1uF): The 0.1uF capacitance is commonly utilized in electronic circuits for tasks like filtering, noise suppression, and signal coupling. This value is significant for stabilizing voltage and preventing unwanted fluctuations.Voltage Rating (250V): With a high voltage rating of 250 volts, this capacitor can operate safely in circuits that function at this voltage level. It is well-suited for handling higher voltage applications or environments where voltage spikes might occur.Tolerance (10%): The 10% tolerance indicates the possible variance in the capacitance value from its nominal value. This level of tolerance is typical for general-use capacitors, offering a good balance between performance and cost.Pitch (10mm): The 10mm pitch refers to the distance between the leads of the capacitor. This size is convenient for various types of circuit boards, particularly where larger lead spacing is necessary for the layout or design.Application: This capacitor, with its combination of features, is versatile for a broad range of applications, including power supplies, audio electronics, and other general electronic equipment requiring a stable and reliable capacitor.Given its specifications, the JFB02E104K100000 is an excellent choice for applications that demand a capacitor with a moderate capacitance value, a high voltage rating, standard tolerance, and a specific lead spacing for easy integration into diverse electronic designs.
COST PER PIECE
The EWR158M2VQ1LO5 is a capacitor with a capacitance of 1500 microfarads (µF) and a voltage rating of 350 volts. It is designed to operate at temperatures up to 85°C. This type of capacitor is typically used in electronic circuits where a high capacitance value and voltage rating are required.
Capacitance (1500µF): The capacitance of 1500 microfarads indicates its ability to store a substantial amount of charge, making it suitable for applications requiring high energy storage and filtering capabilities.
Voltage Rating (350V): The voltage rating of 350 volts signifies the maximum voltage the capacitor can safely handle. This high voltage rating makes it appropriate for use in power supply circuits and other high-voltage applications.
Temperature Rating (85°C): The capacitor's ability to operate at temperatures up to 85°C indicates its suitability for use in environments or applications where it may be subjected to elevated temperatures.
Model (EWR158M2VQ1LO5): This specific model number helps identify the exact specifications and characteristics of the capacitor, which is important for ensuring compatibility and safety in its application.
Applications: Capacitors like the EWR158M2VQ1LO5 are commonly used in power electronics, including power supplies, inverters, and converters, as well as in audio applications for filtering and energy storage. They are also used in industrial and automotive electronic systems.
Features: This type of capacitor is known for its high capacitance and voltage handling capabilities. It's designed to provide stable performance and reliability in demanding applications.
The EWR158M2VQ1LO5 capacitor, with its 1500µF capacitance, 350V voltage rating, and ability to operate at temperatures up to 85°C, is an effective component for electronic designs requiring robust energy storage and filtering capabilities in high-voltage environments.
PACK OF 100 PIECES
The PT10MH01474A2020 is a linear carbon potentiometer with a resistance value of 470K ohms and a physical size of 10mm. It has a tolerance of ±20%, indicating the variability in its resistance value. This type of potentiometer is commonly used for controlling voltage and current in various electronic circuits.
Resistance (470K Ohms): The 470K ohms resistance value is suitable for applications that require this level of resistance for controlling electrical parameters like voltage and current.
Potentiometer Type (Linear Carbon): As a linear carbon potentiometer, it provides a smooth, linear change in resistance as the wiper moves across the resistive material, typically carbon. This type is known for its reliability and stability.
Size (10mm): The 10mm size refers to the physical dimensions of the potentiometer, which is compact and suitable for applications where space is limited.
Tolerance (±20%): The ±20% tolerance means the actual resistance can vary by up to 20% from the stated 470K ohms. This level of tolerance is typical for many potentiometers and is adequate for general use applications.
Applications: This potentiometer is used in a variety of electronic applications, including volume controls in audio equipment, tuning and calibration in circuits, and as adjustable resistors in various electronic devices.
Features: Carbon linear potentiometers like the PT10MH01474A2020 are chosen for their smooth linear response, durability, and cost-effectiveness. They are commonly used in applications where precise resistance control is not critical but reliable operation is needed.
The PT10MH01474A2020 carbon linear potentiometer, with its 470K ohms resistance, 10mm size, and ±20% tolerance, is a versatile component for a variety of electronic applications where simple, effective resistance control is required.
PACK OF 100 PIECES
The PT15NV18105A2020 is a linear carbon potentiometer with a resistance value of 10K ohms and a length of 15mm. It features a tolerance of ±20%, indicating the range of potential variance in its resistance value. This type of potentiometer is commonly utilized in various electronic applications for adjusting and controlling voltage or current.
Resistance (10K Ohms): The 10K ohms resistance is suitable for a wide range of applications, particularly where this level of resistance is needed for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): Being a linear carbon potentiometer, it offers a consistent and smooth change in resistance as the wiper is adjusted along the carbon track. This type is known for its reliability and stability in various control applications.
Size (15mm): The 15mm size refers to the potentiometer's physical dimensions, making it suitable for use in situations where a slightly larger size is acceptable and beneficial for the application.
Tolerance (±20%): The ±20% tolerance indicates that the actual resistance value can vary by up to 20% from the nominal 10K ohms. This level of tolerance is common in general-purpose potentiometers and is suitable for many applications.
Applications: This potentiometer is used in diverse electronic applications, including as a control interface for volume in audio devices, for tuning and calibration in electronic circuits, and as an adjustable resistor in various types of electronic equipment.
Features: Carbon linear potentiometers, such as the PT15NV18105A2020, are selected for their smooth linear response, durability, and cost-effectiveness. They are particularly useful in applications where precise resistance control is not critical, but reliable and consistent performance is necessary.
The PT15NV18105A2020 carbon linear potentiometer, with its 10K ohms resistance, 15mm size, and ±20% tolerance, is an effective component for various electronic applications where simple and reliable resistance adjustment is needed.
PACK OF 100 PIECES
The PT15NH06105A2020 is a linear carbon potentiometer with a resistance value of 1M ohm (megaohm) and a physical size of 15mm. It features a tolerance of ±20%, indicating the permissible range of variation in its resistance value. This type of potentiometer is typically used for adjusting and controlling voltage or current in various electronic circuits.
Resistance (1M Ohm): The high resistance value of 1M ohms makes this potentiometer suitable for applications where high resistance is necessary for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): Being a linear carbon potentiometer, it offers a consistent and gradual change in resistance as the wiper moves along the carbon track. These potentiometers are known for their reliability and stable performance.
Size (15mm): The 15mm size refers to the physical dimensions of the potentiometer, making it suitable for applications where a slightly larger size is acceptable.
Tolerance (±20%): The ±20% tolerance signifies that the actual resistance can vary by up to 20% from the stated 1M ohms. This level of tolerance is common for general-purpose potentiometers.
Applications: This potentiometer is used in various electronic applications, such as in audio equipment for volume control, for tuning and calibration in electronic circuits, and as an adjustable resistor in different types of electronic devices.
Features: Carbon linear potentiometers like the PT15NH06105A2020 are chosen for their smooth linear response, durability, and cost-effectiveness. They are often used in applications where precise resistance control is not critical, but reliable and consistent operation is important.
The PT15NH06105A2020 carbon linear potentiometer, with its 1M ohm resistance, 15mm size, and ±20% tolerance, is an effective component for a variety of electronic applications that require simple, reliable resistance adjustment.
PACK OF 100 PIECES
The PT10LV10-251A202 is a linear carbon potentiometer with a resistance value of 250 ohms and a size of 10mm. It features a tolerance of ±20%, indicating the permissible range of variation in its resistance value. This type of potentiometer is commonly used for adjusting and controlling voltage or current in electronic circuits.
Resistance (250 Ohms): The 250 ohms resistance value makes this potentiometer suitable for applications where low resistance is needed for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): As a linear carbon potentiometer, it offers a consistent and smooth change in resistance as the wiper is adjusted along the carbon track. These potentiometers are known for their reliability and stable performance.
Size (10mm): The 10mm size indicates the physical dimensions of the potentiometer, making it ideal for use in applications with limited space.
Tolerance (±20%): The ±20% tolerance means that the actual resistance can vary by up to 20% from the nominal 250 ohms. This level of tolerance is typical for many general-purpose potentiometers.
Applications: This potentiometer is used in various electronic applications, such as for adjusting signal levels in audio circuits, for fine-tuning in electronic devices, and as an adjustable resistor in a range of electronic equipment.
Features: Carbon linear potentiometers like the PT10LV10-251A202 are chosen for their smooth linear response, durability, and cost-effectiveness. They are often used in applications where precise resistance control is not critical, but reliable and consistent operation is important.
The PT10LV10-251A202 carbon linear potentiometer, with its 250 ohms resistance, 10mm size, and ±20% tolerance, is a compact and effective component for a variety of electronic applications that require simple and reliable resistance adjustment.
PACK OF 100 PIECES
The PT10MH01474A2020 is a linear carbon potentiometer with a resistance value of 470K ohms and a physical size of 10mm. It has a tolerance of ±20%, indicating the variability in its resistance value. This type of potentiometer is commonly used for controlling voltage and current in various electronic circuits.
Resistance (470K Ohms): The 470K ohms resistance value is suitable for applications that require this level of resistance for controlling electrical parameters like voltage and current.
Potentiometer Type (Linear Carbon): As a linear carbon potentiometer, it provides a smooth, linear change in resistance as the wiper moves across the resistive material, typically carbon. This type is known for its reliability and stability.
Size (10mm): The 10mm size refers to the physical dimensions of the potentiometer, which is compact and suitable for applications where space is limited.
Tolerance (±20%): The ±20% tolerance means the actual resistance can vary by up to 20% from the stated 470K ohms. This level of tolerance is typical for many potentiometers and is adequate for general use applications.
Applications: This potentiometer is used in a variety of electronic applications, including volume controls in audio equipment, tuning and calibration in circuits, and as adjustable resistors in various electronic devices.
Features: Carbon linear potentiometers like the PT10MH01474A2020 are chosen for their smooth linear response, durability, and cost-effectiveness. They are commonly used in applications where precise resistance control is not critical but reliable operation is needed.
The PT10MH01474A2020 carbon linear potentiometer, with its 470K ohms resistance, 10mm size, and ±20% tolerance, is a versatile component for a variety of electronic applications where simple, effective resistance control is required.
PACK OF 100 PIECES
The PT10LH01502A2020 is a linear carbon potentiometer with a resistance value of 5K ohms and a compact size of 10mm. It has a tolerance of ±20%, indicating the allowable variation in its resistance value. This type of potentiometer is frequently utilized in electronic circuits for adjusting and controlling voltage and current.
Resistance (5K Ohms): The 5K ohms resistance value makes this potentiometer suitable for a wide range of applications, particularly where this level of resistance is needed for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): Being a linear carbon potentiometer, it provides a consistent and smooth change in resistance as the wiper moves along the carbon track. This type is known for its reliability and stable performance.
Size (10mm): The 10mm size refers to the physical dimensions of the potentiometer, making it ideal for applications where space is limited.
Tolerance (±20%): The ±20% tolerance signifies that the actual resistance can vary by up to 20% from the stated 5K ohms. This level of tolerance is common for general-purpose potentiometers and is adequate for many applications.
Applications: This potentiometer is used in various electronic applications, such as for volume control in audio equipment, for tuning and calibration in electronic circuits, and as an adjustable resistor in different electronic devices.
Features: Carbon linear potentiometers like the PT10LH01502A2020 are selected for their smooth linear response, durability, and cost-effectiveness. They are widely used in applications where precise resistance control is not critical but reliable and consistent operation is needed.
The PT10LH01502A2020 carbon linear potentiometer, with its 5K ohms resistance, 10mm size, and ±20% tolerance, is a compact and effective component for a range of electronic applications requiring simple, reliable resistance adjustment.
PACK OF 100 PIECES
The PT10LV10502A2020 is a linear carbon potentiometer with a resistance value of 5K ohms and a compact size of 10mm. It features a tolerance of ±20%, indicating the allowable range of variation in its resistance value. This type of potentiometer is widely used in electronic circuits for adjusting and controlling voltage and current.
Resistance (5K Ohms): The 5K ohms resistance makes this potentiometer suitable for various applications, especially where this level of resistance is needed for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): Being a linear carbon potentiometer, it offers a consistent and smooth change in resistance as the wiper moves along the carbon track. These potentiometers are known for their reliability and stable performance.
Size (10mm): The 10mm size refers to the physical dimension of the potentiometer, making it ideal for applications with limited space.
Tolerance (±20%): The ±20% tolerance indicates that the actual resistance can vary by up to 20% from the nominal 5K ohms. This level of tolerance is common for general-use potentiometers and is adequate for many applications.
Applications: This potentiometer is used in a variety of electronic applications, such as for volume control in audio equipment, for tuning or calibration in electronic circuits, and as an adjustable resistor in various electronic devices.
Features: Carbon linear potentiometers like the PT10LV10502A2020 are chosen for their smooth linear response, durability, and cost-effectiveness. They are often used in applications where precise resistance control is not critical, but reliable and consistent operation is important.
The PT10LV10502A2020 carbon linear potentiometer, with its 5K ohms resistance, 10mm size, and ±20% tolerance, is an efficient and compact component for a range of electronic applications requiring simple, reliable resistance adjustment.
PACK OF 100 PIECES
The PX10LH01502A2020 is a linear carbon potentiometer characterized by a resistance value of 5K ohms and a compact physical size of 10mm. It features a tolerance of ±20%, indicating the allowable range of variation in its resistance value. Commonly used in electronic circuits, this potentiometer is designed for adjusting and controlling voltage or current.
Resistance (5K Ohms): The 5K ohms resistance value makes this potentiometer versatile for various applications, especially where this level of resistance is ideal for effective electrical parameter control.
Potentiometer Type (Linear Carbon): Being a linear carbon potentiometer, it offers a smooth and consistent change in resistance as the wiper is adjusted along the carbon track. This type is known for its reliability and stable performance.
Size (10mm): The 10mm size refers to the physical dimension of the potentiometer, making it suitable for use in applications with limited space.
Tolerance (±20%): The ±20% tolerance indicates that the actual resistance can vary by up to 20% from the nominal 5K ohms. This level of tolerance is typical for general-use potentiometers and is sufficient for many applications.
Applications: This potentiometer is used in a variety of electronic applications, including volume control in audio equipment, tuning or calibration in electronic circuits, and as an adjustable resistor in various electronic devices.
Features: Carbon linear potentiometers, such as the PX10LH01502A2020, are chosen for their smooth linear response, durability, and cost-effectiveness. They are commonly used in applications where precise resistance control is not critical, but consistent and reliable operation is important.
The PX10LH01502A2020 carbon linear potentiometer, with its 5K ohms resistance, 10mm size, and ±20% tolerance, is a practical and efficient component for a wide range of electronic applications that require simple and reliable resistance adjustment.
PACK OF 100 PIECES
The PT15LH06502A2020 is a linear carbon potentiometer with a resistance value of 5K ohms and a size of 15mm. It has a tolerance of ±20%, indicating the allowable range of variation in its resistance value. This type of potentiometer is commonly used in electronic circuits for adjusting and controlling voltage and current.
Resistance (5K Ohms): The 5K ohms resistance makes this potentiometer suitable for a wide array of applications, particularly where this level of resistance is needed for effective control of electrical parameters.
Potentiometer Type (Linear Carbon): As a linear carbon potentiometer, it provides a consistent and smooth change in resistance as the wiper moves along the carbon track. These potentiometers are known for their reliability and stable performance.
Size (15mm): The 15mm size refers to the physical dimension of the potentiometer, making it suitable for applications where a slightly larger size is beneficial.
Tolerance (±20%): The ±20% tolerance means the actual resistance can vary by up to 20% from the stated 5K ohms. This level of tolerance is typical for general-use potentiometers and is sufficient for many applications.
Applications: This potentiometer is used in various electronic applications, such as volume control in audio equipment, for tuning and calibration in electronic circuits, and as an adjustable resistor in different types of electronic devices.
Features: Carbon linear potentiometers like the PT15LH06502A2020 are selected for their smooth linear response, durability, and cost-effectiveness. They are commonly used in applications where precise resistance control is not critical, but reliable and consistent operation is important.
The PT15LH06502A2020 carbon linear potentiometer, with its 5K ohms resistance, 15mm size, and ±20% tolerance, is an effective and versatile component for a range of electronic applications requiring simple, reliable resistance adjustment.
PACK OF 3000 PIECES
Introducing the Ceramic Capacitor 0603, a reliable and precise component essential for a variety of electronic applications. The SKU MCF03KTB500104 represents a high-quality capacitor designed for performance and durability.Key Features:Compact 0603 Size: This capacitor features the popular 0603 package size, making it suitable for space-constrained applications and widely used in surface mount technology.X7R Dielectric Material: Equipped with X7R dielectric, this capacitor offers stable electrical characteristics over a broad temperature range, typically -55°C to +125°C, and is well-suited for general-purpose applications.50V Voltage Rating: With a voltage rating of 50 volts, this capacitor can be reliably used in circuits operating at or below this voltage, providing versatility in various electronic designs.100nF Capacitance with 10% Tolerance: This capacitor has a capacitance value of 100 nanofarads (nF) and a tolerance of ±10%, making it ideal for applications that require precise capacitance values for filtering, timing, or coupling functions.Benefits:High-Quality Performance: Designed to offer reliable and stable performance, this ceramic capacitor is an excellent choice for ensuring the smooth operation of electronic circuits.Versatile Application: Suitable for a wide range of electronic applications, including consumer electronics, automotive systems, and industrial machinery.Durable and Reliable: Manufactured with high-quality materials, this capacitor is built to last, ensuring long-term reliability in various operating conditions.Equip your electronic projects with the Ceramic Capacitor 0603 10% X7R 50V 100nF - SKU: MCF03KTB500104, and experience enhanced performance and reliability in your circuit designs.
PACK OF 4000 PIECES
The C0603C333K5RACTU is a ceramic capacitor in a compact 0603 package. It has a capacitance value of 0.033 microfarads (uF) and a voltage rating of 50VDC (volts direct current). The capacitor features an X7R dielectric, known for its stable electrical properties across a wide temperature range. The 10% tolerance indicates the degree of variance in its capacitance value. Ceramic capacitors like this one are commonly used in electronic circuits for filtering, bypassing, and noise reduction. The 0603 package size is very small, making it suitable for densely packed circuit boards and applications where space is at a premium. This type of capacitor is ideal for general-purpose use in a variety of electronic devices, ranging from consumer electronics to industrial equipment, where reliability and stability under varying environmental conditions are required.
PACK OF 4000 PIECES
The C0603C120K8RAC38 is a compact ceramic capacitor in a 0603 package. It offers a capacitance of 12 picofarads (pF) and is rated for use at 10 volts DC (VDC). This capacitor is categorized within the X7R dielectric class, noted for its reliable performance and stability over a wide range of temperatures. Furthermore, it has a 10% tolerance, indicating a high degree of precision in maintaining its capacitance value.
Key Features and Benefits:
Capacitance (12pF): The 12 picofarad capacitance is ideal for high-frequency and RF applications, including oscillators and filter circuits. This specific value is crucial in applications where precise timing and signal integrity are necessary.
Voltage Rating (10VDC): The 10 volts DC rating ensures suitability for low-voltage applications, typical in microcontroller circuits and signal processing.
Dielectric (X7R): The X7R dielectric classification guarantees stability across a significant temperature range, making the capacitor a reliable option in varying environmental conditions. It maintains its capacitance with minimal fluctuation even with temperature changes.
Tolerance (10%): A tolerance of 10% reflects the capacitor's ability to retain a capacitance value close to its nominal rating, ensuring accuracy and consistency in performance.
Package (0603 SMD): The 0603 package is an ultra-compact surface-mount format, designed for space-constrained applications. It is commonly used in high-density electronic boards where space efficiency is paramount.
In summary, the C0603C120K8RAC38 ceramic capacitor is an excellent choice for applications requiring a small, reliable, and precise capacitive component. Its 12pF capacitance, 10VDC rating, X7R dielectric, and 10% tolerance, all in a 0603 SMD package, make it well-suited for a wide range of electronic applications, particularly in high-frequency and RF circuitry.
PACK OF 4000 PIECES
The C0603C331K1RACTU is a ceramic capacitor in a 0603 surface-mount device (SMD) package, known for its compact size and reliability. It features a capacitance of 330 picofarads (pF), a voltage rating of 100 volts DC (VDC), and falls under the X7R dielectric category. The X7R dielectric is characterized by its stability over a wide temperature range. This capacitor has a tolerance of 10%, indicating a balance between precision and flexibility in its capacitance value.
Key Features and Benefits:
Capacitance (330pF): The 330 picofarad capacitance is suitable for a range of applications, including signal processing, filtering, and timing circuits, where a specific small capacitance value is essential.
Voltage Rating (100VDC): With a 100-volt DC rating, this capacitor can handle medium to high voltage applications, providing versatility in a variety of electronic devices and circuits.
Dielectric (X7R): The X7R dielectric material offers excellent stability over a broad temperature range, ensuring consistent performance under varying environmental conditions. This characteristic is crucial for applications where temperature fluctuations are common.
Tolerance (±10%): The 10% tolerance indicates that the actual capacitance of the capacitor can vary by ±10% from its nominal value. This level of precision is suitable for most standard electronic applications.
Package (0603 SMD): The 0603 package size is one of the smallest standard sizes for SMD components, making it ideal for compact electronic devices and circuit boards where space is at a premium.
Model (C0603C331K1RACTU): The specific model number C0603C331K1RACTU accurately identifies the capacitor's features, ensuring the right selection for compatibility and performance in electronic designs.
Applications: Frequently used in sectors such as telecommunications, consumer electronics, automotive systems, and more. This capacitor is essential where a reliable and stable ceramic capacitor with a specific capacitance is needed.
Features: Renowned for its compact size, stability, and reliability, the C0603C331K1RACTU ceramic capacitor is designed to provide effective energy storage and noise filtering in electronic circuits. Its SMD design is particularly suited for automated PCB assembly, facilitating efficient manufacturing and design flexibility.
In summary, the C0603C331K1RACTU is a high-performance ceramic capacitor with a 330pF capacitance, 100VDC voltage rating, X7R dielectric, and ±10% tolerance, all housed in a 0603 SMD package. It is an ideal component for various electronic applications requiring a compact, reliable, and efficient capacitive element for energy storage, filtering, or decoupling.
PACK OF 4000 PIECES
The C0805C104K5RAC is a highly versatile ceramic capacitor in an 0805 package. It features a capacitance of 0.1 microfarads (µF), with a voltage rating of 50 volts DC (VDC). This capacitor falls under the X7R dielectric category, known for its stability and reliability over a wide temperature range. The 10% tolerance indicates its precision in maintaining the capacitance value.
Key Features and Benefits:
Capacitance (0.1µF): The 0.1 microfarad capacitance is suitable for general-purpose applications, including bypassing, decoupling, and filtering. This value is common in various circuits, providing essential stability in electronic operations.
Voltage Rating (50VDC): The 50 volts DC rating makes this capacitor ideal for higher voltage applications than typical low-voltage capacitors. This feature allows it to be used in a broader range of electronic circuits, ensuring safety and performance.
Dielectric (X7R): The X7R dielectric material offers excellent stability over a wide temperature range, making it a reliable choice for various environments and applications. It maintains its capacitance with minimal variation under temperature fluctuations.
Tolerance (10%): The 10% tolerance indicates that the capacitor's actual capacitance value is within 10% of its nominal value. This level of precision is suitable for most standard applications.
Package (0805 SMD): The 0805 package size is a compact, industry-standard footprint, facilitating easy integration into a wide array of electronic devices and circuit boards, particularly where space is at a premium.
Model (C0805C104K5RAC): The model number C0805C104K5RAC precisely specifies the capacitor's characteristics, ensuring accurate selection and compatibility in electronic designs.
In summary, the C0805C104K5RAC is an efficient ceramic capacitor designed for versatile applications. With its 0.1µF capacitance, 50VDC rating, X7R dielectric, and 10% tolerance, all housed in an 0805 SMD package, it is an ideal choice for a wide range of electronic applications requiring a reliable and precise capacitive component.
PACK OF 4000 PIECES
The C0805C103KK5RAC is a ceramic capacitor designed for high performance in various electronic applications. Packaged in the widely used 0805 footprint, it offers a capacitance of 10000 picofarads (pF), equivalent to 0.01 microfarads (µF), and can handle a voltage of up to 50 volts DC (VDC). The capacitor employs the X7R dielectric material, which is recognized for its stability over a considerable temperature range. With a tolerance of 10%, this capacitor ensures precise capacitance value for reliable circuit performance.
Key Features and Benefits:
Capacitance (10000pF/0.01µF): The 10000 picofarad capacitance is ideal for a range of applications such as timing, filtering, and frequency control, where a specific capacitance value is crucial for circuit functionality.
Voltage Rating (50VDC): This rating indicates that the capacitor can be safely used in circuits with up to 50 volts DC. This voltage capacity makes it suitable for various electronic circuits, including those requiring a higher voltage range.
Dielectric (X7R): The X7R dielectric provides stable capacitance values over a wide temperature range, making this capacitor reliable in varying environmental conditions. This characteristic is essential for applications where temperature fluctuations are common.
Tolerance (10%): The 10% tolerance level implies that the actual capacitance of the capacitor can vary by ±10% from its nominal value, offering a balance between precision and flexibility for most standard electronic applications.
Package (0805 SMD): The 0805 surface-mount package is a compact, industry-standard size, enabling easy integration into various electronic devices and circuit boards, especially where space is limited.
Model (C0805C103KK5RAC): The specific model number C0805C103KK5RAC accurately identifies the capacitor's features, ensuring correct selection and compatibility in electronic designs.
In conclusion, the C0805C103KK5RAC is a versatile and reliable ceramic capacitor, suitable for a wide array of electronic applications where precision and stability are paramount. Its 10000pF capacitance, 50VDC voltage rating, X7R dielectric material, and 10% tolerance, all within an 0805 SMD package, make it an excellent choice for designers and engineers seeking a compact, yet effective, capacitive component. This capacitor is particularly useful in applications that require stable performance under varying environmental conditions, such as in telecommunications, consumer electronics, and automotive electronics.
PACK OF 4000 PIECES
The C0805C102K5RAC is a ceramic capacitor that provides reliable performance in a wide range of electronic applications. This capacitor is designed in an 0805 surface-mount package and features a capacitance of 1000 picofarads (pF), equivalent to 0.001 microfarads (µF). It has a voltage rating of 100 volts DC (VDC), making it suitable for higher voltage applications. The capacitor utilizes an X7R dielectric, known for its stability across a broad temperature range. With a 10% tolerance, it offers a balance of precision and flexibility for various electronic circuits.
Key Features and Benefits:
Capacitance (1000pF/0.001µF): The 1000 picofarad capacitance is effective for a range of uses including signal processing, filtering, and timing applications, providing essential functionality in electronic circuits.
Voltage Rating (100VDC): The higher 100-volt DC rating allows this capacitor to be used in applications that operate at higher voltages, thereby broadening its utility in more demanding electronic environments.
Dielectric (X7R): The X7R dielectric material ensures a stable capacitance value over a wide temperature range, which is crucial for consistent performance in varying operating conditions.
Tolerance (10%): This level of tolerance indicates that the actual capacitance can vary by ±10% from the nominal value, which is acceptable for many standard electronic applications.
Package (0805 SMD): The 0805 package size is a small, industry-standard footprint, making it ideal for compact electronic devices and circuit boards where space efficiency is a key concern.
Model (C0805C102K5RAC): The specific model number C0805C102K5RAC accurately specifies the capacitor's characteristics, ensuring the right choice for compatibility and performance in electronic designs.
Overall, the C0805C102K5RAC ceramic capacitor is a highly versatile component, ideal for various applications requiring a compact, high-voltage, and stable capacitive solution. Its combination of a 1000pF capacitance, 100VDC voltage rating, X7R dielectric, and 10% tolerance, all in an 0805 SMD package, makes it a preferred choice in electronics where performance and reliability are essential. This capacitor is particularly suitable for applications in industries such as telecommunications, consumer electronics, automotive systems, and others where a high-voltage, stable ceramic capacitor is required. Its design and specifications ensure it can handle a variety of electronic tasks efficiently and effectively.
PACK OF 3000 PIECES
The MC05KTB500104 is a ceramic capacitor encased in an 0805 package. It features a substantial capacitance of 100 nanofarads (nF), combined with a voltage rating of 50 volts DC (VDC). Classified under the X7R dielectric category, this capacitor is distinguished for its robust performance and stability over a wide temperature range. The 10% tolerance denotes its precision in maintaining the specified capacitance value.
Key Features and Benefits:
Capacitance (100nF): This high capacitance value is suited for a range of applications, including decoupling, noise suppression, and signal conditioning. It is particularly effective in providing stable energy storage and smoothing in electronic circuits.
Voltage Rating (50VDC): The 50 volts DC rating enables the capacitor to function effectively in medium-voltage applications, offering versatility in a variety of electronic circuit designs.
Dielectric (X7R): The X7R dielectric material is valued for its excellent temperature stability, ensuring reliable capacitor performance under varying environmental conditions. It maintains its capacitance with minimal fluctuation in a wide temperature range.
Tolerance (10%): A tolerance of 10% implies that the capacitor’s actual capacitance is within 10% of its nominal value, providing a reliable degree of accuracy for standard electronic applications.
Package (0805 SMD): The 0805 package size is compact yet manageable, making it a popular choice in the electronics industry for surface-mounted applications where space efficiency is important, but ease of handling is also a consideration.
In summary, the MC05KTB500104 ceramic capacitor is a highly reliable and precise component, ideal for a wide range of applications. With its 100nF capacitance, 50VDC rating, X7R dielectric, and 10% tolerance, all housed in an 0805 SMD package, it stands as an excellent choice for electronic applications requiring stable and accurate capacitive elements, especially in decoupling and signal conditioning roles.
PACK OF 4000 PIECES
The C0805C470K5GAC is a ceramic capacitor in an 0805 package, characterized by a capacitance of 47 picofarads (pF) and a voltage rating of 50 volts DC (VDC). This capacitor falls under the C0G (also known as NP0) dielectric category, which is recognized for its exceptional stability and low capacitance drift over a wide temperature range. It also has a tolerance of 10%, signifying high precision in maintaining its capacitance value.
Key Features and Benefits:
Capacitance (47pF): The 47 picofarad capacitance is commonly used in RF and digital applications, including tuning, coupling, and bypassing circuits. It is effective in maintaining signal integrity and providing accurate timing.
Voltage Rating (50VDC): With a voltage rating of 50 volts DC, this capacitor is versatile for use in a range of electronic circuits, including those with medium voltage requirements, ensuring operational safety and reliability.
Dielectric (C0G/NP0): The C0G/NP0 dielectric material is known for its remarkable stability and negligible capacitance change with temperature variations, making it ideal for precision applications where consistency is crucial.
Tolerance (10%): The 10% tolerance indicates a high degree of accuracy, ensuring the capacitor’s capacitance remains close to its specified value, which is vital for sensitive electronic applications.
Package (0805 SMD): The 0805 package size is a standard in the industry, offering a balance between compact size and ease of handling. It is widely used in various types of electronic devices, especially where space-saving is necessary but accessibility is also important.
In summary, the C0805C470K5GAC ceramic capacitor is an excellent choice for applications requiring a stable, precise, and reliable capacitive component. Its 47pF capacitance, 50VDC rating, C0G dielectric, and 10% tolerance, all packaged in an 0805 SMD format, make it highly suitable for a wide array of electronic applications, particularly in RF and precision-focused circuits.
PACK OF 4000 PIECES
The C1206F104K3RAC is a versatile ceramic capacitor in a 1206 package. It boasts a capacitance of 0.1 microfarads (µF), with a voltage rating of 25 volts DC (VDC). This capacitor falls under the X7R dielectric category, acclaimed for its stability and reliability over a broad temperature range. Additionally, it features a 10% tolerance, highlighting its precision in maintaining the specified capacitance value.
Key Features and Benefits:
Capacitance (0.1µF): The 0.1 microfarad capacitance is suitable for a wide range of applications, including filtering, decoupling, and noise suppression. This value is commonly employed in various electronic circuits due to its effectiveness in providing operational stability.
Voltage Rating (25VDC): The 25 volts DC rating enables the capacitor to be used in medium-voltage applications, extending its applicability beyond standard low-voltage scenarios. This characteristic enhances its versatility across diverse electronic circuits, ensuring safety and efficacy.
Dielectric (X7R): The X7R dielectric material of this capacitor ensures excellent stability over an extensive temperature range, making it a reliable component for varying environmental conditions and applications. It maintains its capacitance with minimal variation under temperature fluctuations.
Tolerance (10%): A tolerance of 10% signifies that the actual capacitance of the capacitor is within 10% of its nominal value, offering a dependable level of precision for most standard electronic applications.
Package (1206 SMD): The 1206 package is a standard SMD size, optimal for applications where space is a consideration but handling and ease of use are also important. It is widely used in the electronics industry for its balanced size and functionality.
In summary, the C1206F104K3RAC ceramic capacitor is designed for various applications requiring a reliable and accurate capacitive component. With its 0.1µF capacitance, 25VDC rating, X7R dielectric, and 10% tolerance, all in a 1206 SMD package, it is an ideal choice for a multitude of electronic applications.
PACK OF 4000 PIECES
The C1206F104K3RAC is a robust ceramic capacitor that comes in a 1206 package. It features a capacitance of 0.1 microfarads (µF), with a voltage rating of 25 volts DC (VDC). This capacitor falls into the X7R dielectric category, which is well-regarded for its excellent stability and reliability across a broad temperature range. Additionally, the capacitor has a tolerance of 10%, which underscores its precision in maintaining its capacitance value.
Key Features and Benefits:
Capacitance (0.1µF): The 0.1 microfarad capacitance is ideal for a variety of applications, such as filtering, decoupling, and noise suppression. This value is a standard choice in electronic circuits, known for its effectiveness in ensuring operational stability.
Voltage Rating (25VDC): With a rating of 25 volts DC, this capacitor is suitable for medium-voltage applications, providing more versatility than lower-voltage alternatives. This feature broadens its scope of use in various electronic circuits, enhancing both safety and functionality.
Dielectric (X7R): The X7R dielectric material used in this capacitor is known for its superb stability over a wide temperature range. This characteristic makes it a dependable choice in different environmental conditions, maintaining its capacitance with minimal variation under temperature changes.
Tolerance (10%): A tolerance of 10% means that the actual capacitance of the capacitor is within 10% of its nominal value. This level of accuracy is suitable for most standard applications.
Package (1206 SMD): The 1206 package is a standard SMD size that strikes an excellent balance between ease of handling and space efficiency on PCBs. It is widely used in the electronics industry, particularly in applications where space and reliability are key considerations.
Model (C1206F104K3RAC): The model number C1206F104K3RAC precisely specifies this capacitor's characteristics, ensuring accurate and compatible selection in electronic design projects.
In summary, the C1206F104K3RAC is a highly efficient and reliable ceramic capacitor, designed for versatile electronic applications. Its 0.1µF capacitance, 25VDC rating, X7R dielectric, and 10% tolerance, all housed in a 1206 SMD package, make it an outstanding choice for a wide array of electronic applications requiring a dependable and precise capacitive component.
PACK OF 4000 PIECES
The C0805C472K5RAC is a highly versatile ceramic capacitor in an 0805 package. It features a capacitance of 4700 picofarads (pF), equivalent to 0.0047 microfarads (µF), with a voltage rating of 50 volts DC (VDC). This capacitor is classified under the X7R dielectric category, which is renowned for its stability and reliability across a broad temperature range. The capacitor also boasts a 10% tolerance, signifying its accuracy in maintaining the specified capacitance value.
Key Features and Benefits:
Capacitance (0.0047µF): The capacitance of 4700 pF is apt for a range of applications, including noise suppression, filtering, and timing circuits. This specific value is frequently used in electronic circuits for its effective performance in stabilizing operations.
Voltage Rating (50VDC): The rating of 50 volts DC makes this capacitor suitable for higher voltage applications, extending its usability beyond typical low-voltage scenarios. This attribute ensures its adaptability in diverse electronic circuits, enhancing safety and efficacy.
Dielectric (X7R): The X7R dielectric material of this capacitor guarantees superior stability over a vast temperature spectrum, thereby making it a reliable component for various environmental conditions and applications. It consistently maintains its capacitance with minimal variation amidst temperature changes.
Tolerance (10%): A tolerance of 10% indicates that the actual capacitance of the capacitor lies within 10% of its nominal value, offering a reliable level of precision for standard electronic applications.
Package (0805 SMD): The compact, industry-standard 0805 package size facilitates effortless integration into a myriad of electronic devices and circuit boards, especially in scenarios where space conservation is crucial.
Model (C0805C472K5RAC): The specific model number C0805C472K5RAC accurately defines the capacitor's characteristics, ensuring precise selection and compatibility in electronic designs.
In summary, the C0805C472K5RAC is an effective and reliable ceramic capacitor, designed for versatile applications. With its 0.0047µF capacitance, 50VDC rating, X7R dielectric, and 10% tolerance, all enclosed in an 0805 SMD package, it stands as an ideal choice for a multitude of electronic applications that require a dependable and accurate capacitive component.
