PACK OF 5000 PIECES
The RMC 1206 68K is a Surface-Mount Device (SMD) resistor in a 1206 package size, featuring a resistance value of 68 kiloohms (68kΩ). It has a 5% tolerance, making it suitable for a range of applications in electronic circuits where a mid-range resistance value with standard precision is required.
Key Features and Benefits:
Resistance (68kΩ): The 68 kiloohm resistance is commonly used in electronic circuits for tasks such as voltage division, current limiting, and signal conditioning. It's a versatile resistance value for a wide range of applications.
Tolerance (5%): The 5% tolerance indicates that the actual resistance can vary by up to 5% from its nominal value. This level of precision is adequate for many general-purpose applications where exact resistance values are not crucial.
Package (1206 SMD): The 1206 package size is one of the most commonly used sizes for SMD resistors, offering a balance between ease of handling and space-saving on the PCB, making it suitable for various surface-mount applications.
Model (RMC 1206 68K): This specific model number identifies the resistor's characteristics, ensuring accurate selection and compatibility in electronic design projects.
In summary, the RMC 1206 68K SMD resistor, with its 68kΩ resistance and 5% tolerance, is a practical and versatile component for a wide range of electronic applications. Its standard 1206 package size makes it a suitable choice for both prototyping and mass production in scenarios where a general-purpose resistor with a mid-range resistance value is needed.
PACK OF 5000 PIECES
The RMC 1206 68R JN is a Surface-Mount Device (SMD) resistor in a 1206 package size, featuring a resistance value of 68 ohms (68Ω). It has a tolerance of 5%, making it suitable for general-purpose applications in various electronic circuits.
Key Features and Benefits:
Resistance (68Ω): The 68 ohm resistance is commonly used in electronic circuits for applications like voltage division, current limiting, and signal conditioning. This resistance value is versatile and suitable for a wide range of electronic applications.
Tolerance (5%): The 5% tolerance indicates that the actual resistance can vary by up to 5% from its nominal value. This level of precision is adequate for many general-purpose applications where exact resistance values are not critical.
Package (1206 SMD): The 1206 package size is one of the most commonly used sizes for SMD resistors. It offers a good balance between ease of handling and space-saving on the PCB, making it suitable for various surface-mount applications.
Model (RMC 1206 68R JN): This specific model number identifies the resistor's characteristics, ensuring accurate selection and compatibility in electronic design projects.
In summary, the RMC 1206 68R JN SMD resistor is a reliable and versatile component, ideal for a wide range of electronic applications. Its 68Ω resistance, 5% tolerance, and 1206 package size make it a suitable choice for both prototyping and mass production, particularly in scenarios where a general-purpose resistor is required.
PACK OF 5000 PIECES
The 82 Ohm SMD resistor in a 1206 package stands out with its 1% tolerance, indicating a high-precision component designed for more critical applications where resistance accuracy can affect the circuit's performance. This precision resistor is frequently used in audio applications for speaker crossover networks, and in telecommunication circuits where specific resistance values are crucial for maintaining signal integrity. The 1206 package size allows for adequate power handling while maintaining a small form factor, making it a preferred choice for precision applications in both commercial and high-performance electronics.
PACK OF 5000 PIECES
The CR-10JL7-100R is a Surface-Mount Device (SMD) resistor in a 1210 package size, featuring a resistance value of 100 ohms (100Ω). It has a 5% tolerance, making it suitable for various applications in electronic circuits where a low to mid-range resistance value with standard precision is required.
Key Features and Benefits:
Resistance (100Ω): The 100 ohm resistance is useful in electronic circuits for functions such as current limiting, voltage control, and signal conditioning. It is particularly effective in applications where a specific low to mid-range resistance value is needed.
Tolerance (5%): The 5% tolerance indicates a standard level of precision, suitable for many general-purpose applications where the exact resistance value is not critical to the circuit's operation.
Package (1210 SMD): The 1210 package size is larger than the common 1206 size, offering a higher power rating and better heat dissipation. It is ideal for surface-mount applications where these characteristics are required.
Model (CR-10JL7-100R): This specific model number accurately identifies the resistor's characteristics, ensuring correct component selection for electronic designs.
In summary, the CR-10JL7-100R SMD resistor, with its 100Ω resistance and 5% tolerance, is a practical and reliable component for a wide range of electronic applications. The 1210 package size is particularly suitable for scenarios that require a resistor with a slightly higher power rating and better heat dissipation compared to smaller sizes.
PACK OF 5000 PIECES
The CR-10JL7-220R is a Surface-Mount Device (SMD) resistor in a 1210 package size, featuring a resistance value of 220 ohms (220Ω). It has a 5% tolerance, making it suitable for a range of applications in electronic circuits where a mid-range resistance value with standard precision is needed.
Key Features and Benefits:
Resistance (220Ω): The 220 ohm resistance is commonly used in electronic circuits for functions such as current limiting, voltage control, and signal conditioning. It's effective for applications that require a specific mid-range resistance value.
Tolerance (5%): The 5% tolerance indicates a standard level of precision, suitable for many general-purpose applications where the exact resistance value is not critical to the circuit's functionality.
Package (1210 SMD): The 1210 package size is larger compared to more common sizes like 1206, offering a higher power rating and better heat dissipation. This makes it suitable for applications that require these characteristics.
Model (CR-10JL7-220R): This specific model number accurately identifies the resistor's characteristics, ensuring correct component selection for electronic designs.
In summary, the CR-10JL7-220R SMD resistor, with its 220Ω resistance and 5% tolerance, is a reliable and practical component for a wide range of electronic applications. Its 1210 package size is particularly suitable for scenarios that demand a resistor with a higher power rating and improved heat dissipation compared to smaller sizes.
PACK OF 5000 PIECES
The CR-10JL7-330R is a Surface-Mount Device (SMD) resistor in a 1210 package size, featuring a resistance value of 330 ohms (330Ω). It has a 5% tolerance, making it suitable for a wide range of applications in electronic circuits where a mid-range resistance value with standard precision is required.
Key Features and Benefits:
Resistance (330Ω): The 330 ohm resistance is commonly used in electronic circuits for functions such as current limiting, voltage control, and signal conditioning. This resistance value is particularly effective in applications that require a specific mid-range resistance.
Tolerance (5%): The 5% tolerance indicates a standard level of precision. This level of tolerance is appropriate for many general-purpose applications where the exact resistance value is not critical to the circuit's functionality.
Package (1210 SMD): The 1210 package size, being larger than more common sizes like 1206, offers a higher power rating and better heat dissipation. This makes it suitable for applications that require these characteristics.
Model (CR-10JL7-330R): This specific model number accurately identifies the resistor's characteristics, ensuring the correct component selection for electronic designs.
In summary, the CR-10JL7-330R SMD resistor, with its 330Ω resistance and 5% tolerance, is a reliable and practical component for a wide range of electronic applications. Its 1210 package size is particularly beneficial for scenarios that demand a resistor with a higher power rating and improved heat dissipation compared to smaller sizes.
PACK OF 5000 PIECES
The RMC 2010 1M TR is a Surface-Mount Device (SMD) resistor in a 2010 package size, offering a high resistance value of 1 megaohm (1MΩ). It features a 5% tolerance and a power rating of 1/2 watt (1/2W), making it well-suited for applications that require high resistance with moderate power handling capabilities.
Key Features and Benefits:
High Resistance (1MΩ): The 1 megaohm resistance is often utilized in electronic circuits for voltage division, noise filtering, and timing circuits. This high resistance value is essential in applications requiring significant resistance to control electrical parameters.
Tolerance (5%): The 5% tolerance level provides standard precision, appropriate for applications where the exact resistance value has some margin of variation without affecting the overall circuit functionality.
Power Rating (1/2W): The 1/2 watt power rating signifies the resistor's ability to handle up to half a watt of power, making it suitable for various medium-power applications. This rating is particularly valuable in circuits where higher power handling is necessary compared to lower wattage resistors.
Package (2010 SMD): The 2010 package size is larger than many standard SMD resistors, which allows for better heat dissipation and power handling. This makes it an excellent choice for designs that need a balance between size, power, and thermal performance.
Model (RMC 2010 1M TR): This model number precisely identifies the resistor's specifications, ensuring the correct selection for specific electronic designs and repair needs.
Overall, the RMC 2010 1M TR SMD resistor, with its 1 megaohm resistance, 5% tolerance, and 1/2W power rating, is a highly reliable and efficient component for a variety of electronic applications. Its 2010 package size is particularly beneficial for designs that require a resistor with enhanced power handling and thermal management properties
The CR-12JL4-47K is a Surface-Mount Device (SMD) resistor in a 2512 package size, featuring a resistance value of 47 kilohms (47kΩ). This resistor offers a 5% tolerance, making it an excellent choice for a wide array of electronic circuits that require a high-resistance component with standard precision.
Key Features and Benefits:
Resistance (47kΩ): The 47 kilohm resistance is useful in various electronic applications, such as voltage division, signal conditioning, and as a pull-up or pull-down resistor. It is particularly effective in circuits that need a high but precise resistance value.
Tolerance (5%): The 5% tolerance indicates a good level of precision for general electronic applications. This tolerance level is suitable for circuits where exact resistance values are not critical, but a reasonable degree of accuracy is still needed.
Package (2512 SMD): The 2512 package size is one of the larger SMD resistor sizes, providing excellent heat dissipation and higher power handling capacity. This size is advantageous in applications where larger resistors are necessary due to higher power requirements or thermal considerations.
Model (CR-12JL4-47K): This specific model number helps in accurately identifying the resistor's characteristics, ensuring the correct component is selected for electronic designs and replacements.
In conclusion, the CR-12JL4-47K SMD resistor, with its 47kΩ resistance and 5% tolerance, is a robust and versatile component for various electronic applications. Its 2512 package size is especially suitable for scenarios that demand a resistor with enhanced power handling and heat dissipation capabilities compared to smaller SMD resistors.
PACK OF 50 PIECES
The HB111-C2N-BBN-BN is a Single Pole Double Throw (SPDT) rocker switch, capable of handling up to 16 amperes of current and suitable for use with 250VAC power sources. This type of switch is commonly used in various electrical and electronic applications, both in consumer products and industrial equipment.The SPDT configuration means the switch has three terminals and can connect one input to either of the two outputs. It's a versatile design that allows for the control of two circuits within one switch. This can be particularly useful for applications where users need to alternate between two different modes or settings.With its high current rating of 16A and voltage capacity of 250VAC, this rocker switch is suitable for robust applications, including heavy-duty machinery, power tools, and high-power electrical appliances. The rocker mechanism provides a user-friendly interface, with an easy-to-operate flipping action that offers a clear indication of the switch position.The build quality of the switch is designed to endure frequent use and is likely to feature a sturdy construction, possibly with materials that provide resistance to heat and impacts. This makes it a reliable choice for applications that require a durable and long-lasting switch solution.
PACK OF 50 PIECES
Our Spring Terminal, model DG2002-4.0-02P11, is a high-quality, two-pole terminal block designed for a secure and reliable connection in a variety of electrical applications. Its robust design and ease of use make it an excellent choice for both professional and hobbyist settings.
Key Features:
Two-Pole Configuration: Features two connection points, suitable for wiring where a compact and efficient connection is needed.
High Voltage and Current Rating: Rated for up to 300V and 9A, making it suitable for a wide range of electrical applications.
Spring Clamp Connection: Ensures a secure and stable connection, with easy wire insertion and removal.
Gray Color Housing: The gray housing helps in identification and provides a neutral appearance in various settings.
Compact Size: Designed with space efficiency in mind, ideal for use in confined spaces.
Versatile Application: Suitable for PCBs, control panels, machine tool applications, and more.
Model Number: DG2002-4.0-02P11, indicating specific design and performance characteristics.
Applications:
Industrial control systems.
Electrical panels and distribution boards.
Machinery and equipment wiring.
DIY projects and hobbyist applications.
Home automation systems.
The Spring Terminal 2 Pole 300V 9A, model DG2002-4.0-02P11, is a dependable and efficient solution for ensuring secure electrical connections in a wide array of environments. It stands out for its ease of installation, high electrical rating, and robust design, making it a preferred choice for both professionals and enthusiasts.
PACK OF 50 PIECES
This Spring Terminal Block with a 2-pole configuration features a 4.61mm pitch, designed for creating secure and efficient wire connections. It is particularly suited for applications requiring quick and reliable wire terminations without the need for specialized tools.The 2-pole design is ideal for connecting two wires, commonly used in various electrical systems where simple yet effective connections are necessary. The spring mechanism in the terminal block ensures a strong and consistent grip on the wires, allowing for easy wire insertion and removal while maintaining a secure connection. This feature is especially beneficial in environments subject to vibration or frequent changes, where screw terminals might loosen over time.The 4.61mm pitch provides adequate spacing between connections, promoting safety and reducing the risk of short circuits. This terminal block is often employed in control panels, lighting systems, and other electrical applications that demand quick and versatile wire connections. Its compact design allows for efficient use of space in circuit boards or electrical enclosures, making it a practical choice for both industrial and commercial settings. The spring terminal block is recognized for its ease of use, durability, and reliability, enhancing the overall efficiency and safety of electrical installations.
PACK OF 50 PIECES
This Spring Terminal Block is designed with a 3-pole configuration and a pitch of 4.61mm, offering a convenient and reliable solution for connecting multiple wires in a compact space. It's particularly suitable for applications that require quick, secure, and tool-free wire connections.
The 3-pole design enables the simultaneous connection of three wires, making it ideal for more complex wiring configurations in electrical systems. Each pole is equipped with a spring mechanism that ensures a strong and consistent grip on the inserted wires. This feature is particularly valuable in environments where vibrations or movement could loosen traditional screw-type connections.
With a 4.61mm pitch, this terminal block provides enough space between each connection to prevent electrical shorts and ensure safety. It's commonly used in electrical control panels, automation systems, and other applications where ease of installation, reliability, and space efficiency are key considerations. The spring terminal block's ease of use and robust design make it a preferred choice for both rapid prototyping and long-term installations in various industrial and commercial settings.
COST PER PIECE
Our Spring Terminal Block, model 9EDGK-7.5-08P-13, is a high-performance connector designed to facilitate reliable and easy connections in a wide range of electrical systems. It is capable of accommodating a range of wire sizes, making it incredibly versatile for different applications.
Key Features:
Voltage and Current Rating: Rated for up to 300V and 16A, making it suitable for a variety of high-power applications.
Wire Compatibility: Accommodates a wide range of wire sizes from AWG 14-28, offering flexibility in terms of wiring options.
Spring Mechanism: Features a robust spring clamp mechanism, ensuring a secure and stable connection that can withstand vibrations and thermal expansion.
Ease of Use: Designed for quick and easy wire installation, which enhances efficiency during assembly and maintenance.
High-Quality Material: Constructed with durable materials, providing long-term reliability and resistance to environmental factors.
Compact Design: The 7.5mm pitch provides a compact form factor, allowing for efficient use of space in crowded PCBs or control panels.
2-Pole Configuration: This model is equipped with 2 connection poles, ideal for applications requiring a compact, yet effective connection solution.
Applications:
Industrial control and automation systems.
Power distribution in machinery and equipment.
Electrical panels and circuit assemblies.
Consumer electronics.
Renewable energy systems, like solar panels or wind turbines.
DIY electronics and hobbyist projects.
The Spring Terminal Block, model 9EDGK-7.5-08P-13, is an excellent choice for professionals and hobbyists seeking a high-capacity and reliable terminal block. Its combination of high current and voltage rating, along with the flexibility in wire gauge accommodation, ensures it meets the needs of both demanding industrial environments and intricate electronic projects
PACK OF 100 PIECES
The L78L series of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The L78L series used as Zener diode/resistor combination replacement, offers e improvement along with lower quiescent current and lower noise.
Key Features
Output current up to 100 mA
Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 V thermal overload protection
Short-circuit protection
No external components are required
Available in either ± 4% (A) or ± 8% (C) selection
COST PER PIECE
The STM32 Nucleo-64 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode.
The ARDUINO® Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer.
The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.
All features
Common features
STM32 microcontroller in an LQFP64 or LQFP48 package
1 user LED shared with ARDUINO®
1 user and 1 reset push-buttons
32.768 kHz crystal oscillator
Board connectors:
ARDUINO® Uno V3 expansion connector
ST morpho extension pin headers for full access to all STM32 I/Os
Flexible power-supply options: ST-LINK USB VBUS or external sources
On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
Comprehensive free software libraries and examples available with the STM32Cube MCU Package
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Board-specific features
External SMPS to generate Vcore logic supply
24 MHz or 48 MHz HSE
User USB Device full speed, or USB SNK/UFP full speed
Cryptography
Board connectors:
External SMPS experimentation dedicated connector
USB Type-C®, Micro-B, or Mini-B connector for the ST-LINK
USB Type-C® user connector
MIPI® debug connector
PACK OF 400 PIECES
The 2801-04PSG1-PB is a straight female header with 4 pins, designed for use in various electrical and electronic applications. This header is ideal for creating reliable and secure connections in circuits, particularly where a direct, linear connection of components is required. The 4-pin configuration makes it suitable for a variety of applications where a moderate number of connections are needed.
Number of Pins (4 Pins): The header has four contact points or pins, making it suitable for applications that require simple yet effective electrical connections involving four conductors.
Straight Female Design: As a straight female header, it is designed to mate with corresponding male pins or connectors, ensuring a stable and secure electrical connection.
Model (2801-04PSG1-PB): The model number 2801-04PSG1-PB accurately identifies the header's specifications, ensuring the correct application and compatibility in various electrical systems.
Applications: Commonly used in PCB (Printed Circuit Board) applications, electronic devices, and various digital and analog connections where a reliable and straightforward female header is required.
Features: Known for its straightforward design, reliability, and ease of use, the 2801-04PSG1-PB header is designed to provide stable and secure electrical connections in a range of electronic systems.
In summary, the 2801-04PSG1-PB is a versatile straight female header with 4 pins, ideal for establishing secure and reliable electrical connections in a wide range of electronic systems and devices.
PACK OF 100 PIECES
The 2200-2X36PSGI-PB is a straight header featuring a dual-row configuration with 2 rows of 36 pins each. This header is designed for use in a variety of electronic applications, providing a reliable and secure means of establishing multiple electrical connections. The straight design and dual-row format make it suitable for situations where a high density of connections is required in a linear arrangement.
Pin Configuration (2x36 Pins): The header has a total of 72 pins, arranged in two rows of 36 pins each. This configuration allows for a large number of connections in a compact space.
Straight Header Design: The straight design of the header allows for vertical mounting on printed circuit boards (PCBs), facilitating direct and organized connections.
Model (2200-2X36PSGI-PB): The model number 2200-2X36PSGI-PB accurately specifies the header's characteristics, ensuring the correct application and compatibility in various electronic devices.
Applications: Commonly used in PCB applications, including computer hardware, communication devices, and industrial controls, where a high-density, organized array of connections is required.
Features: Known for its high pin count, dual-row configuration, and robust design, the 2200-2X36PSGI-PB header is designed to provide efficient and stable electrical connections in a variety of electronic systems.
In summary, the 2200-2X36PSGI-PB is a straight header with a dual-row configuration, featuring 2x36 pins. It is ideal for electronic applications requiring a dense and orderly array of connections, with a design focused on providing reliable and secure connectivity.
PACK OF 10 PIECES
The TRJ-12VDC-SA-CD is a subminiature relay designed for low power consumption, operating with a coil voltage of 12 volts DC (12VDC). It has a switching capability of up to 5 amperes and a power rating of 0.2 watts. This compact and efficient relay is ideal for various applications in electronics where space is limited and energy efficiency is essential.
Key Features and Benefits:
12VDC Coil Voltage: Compatible with low-voltage control systems, making it suitable for a wide range of electronic applications.
5 Amp Switching Capacity: Capable of controlling and switching moderate current loads, suitable for various electronic devices and circuits.
Low Power Consumption (0.2W): The relay's energy-efficient design is ideal for battery-powered or energy-sensitive applications.
Subminiature Size: Its compact size allows for easy integration into space-constrained electronic devices and circuit boards.
Versatile Applications: Ideal for use in communication devices, consumer electronics, automation systems, and other applications requiring a small, efficient relay.
Reliable Performance: Engineered for durability and consistent performance, ensuring reliability in various operating conditions.
Model (TRJ-12VDC-SA-CD): The specific model number facilitates easy identification and procurement, ensuring the correct component selection for electronic designs and repairs.
In summary, the TRJ-12VDC-SA-CD subminiature relay, with its 12VDC coil, 5Amp switching capacity, and low power consumption, is a versatile and energy-efficient component suitable for a wide range of applications in the electronics industry. Its compact size and reliability make it particularly useful for space-constrained and energy-sensitive electronic systems.
PACK OF 10 PIECES
The TRJ-24VDC-SA-CD- is a subminiature relay designed for energy-efficient operation with a coil voltage of 24 volts DC (24VDC). It is capable of switching currents up to 5 amperes and is RoHS compliant, adhering to environmental standards for hazardous substances. This compact relay is ideal for various applications in electronics where space efficiency and compliance with environmental regulations are essential.
Key Features and Benefits:
24VDC Coil Voltage: Suitable for systems operating at 24 volts DC, making it versatile for a wide range of electronic applications.
5 Amp Switching Capacity: Capable of controlling and switching moderate current loads, which is ideal for various electronic devices and circuits.
RoHS Compliant: Adherence to the Restriction of Hazardous Substances directive means this relay is manufactured with minimal environmental impact, aligning with global sustainability standards.
Subminiature Size: Its compact design allows for easy integration into space-constrained electronic devices and circuit boards, making it ideal for applications where space is at a premium.
Versatile Applications: Perfect for use in communication devices, consumer electronics, automation systems, and other applications requiring a small, efficient, and environmentally friendly relay.
Reliable and Durable: Engineered for consistent performance and durability, ensuring reliability in various operating conditions.
Model (TRJ-24VDC-SA-CD-): The specific model number ensures easy identification and procurement, facilitating the correct component selection for electronic designs and repairs.
In summary, the TRJ-24VDC-SA-CD- subminiature relay, with its 24VDC coil, 5Amp switching capacity, and RoHS compliance, is a versatile and environmentally responsible component suitable for a wide range of applications in the electronics industry. Its compact size and reliable performance make it particularly useful in space-constrained and eco-conscious electronic systems.
PACK OF 50 PIECES
The RH110-C2-BB is a single pole single throw (SPST) switch, capable of handling a current of 16 amperes at 250 volts (16A/250V). This switch features a sleek black design, making it suitable for a wide range of applications that require a robust and straightforward on-off switching mechanism.
Key Features and Benefits:
SPST Configuration: The single pole single throw design ensures simple and reliable on-off control. This configuration is ideal for a variety of electrical and electronic devices for basic switching operations.
High Current and Voltage Rating (16A/250V): With its ability to handle up to 16 amperes at 250 volts, this switch is suitable for high-power applications, making it ideal for use in both residential and commercial environments, including appliances, lighting, and machinery.
Sleek Black Design: The black color of the switch offers a classic and versatile appearance, making it suitable for various aesthetic preferences and design needs.
Durability and Reliability: Constructed to be robust and dependable, the RH110-C2-BB can withstand regular usage, making it suitable for various demanding applications.
Versatile Applications: This switch can be used in a range of settings, including home appliances, office equipment, industrial machinery, and lighting systems that require a durable and high-capacity switch.
Model (RH110-C2-BB): The specific model number, RH110-C2-BB, ensures easy identification and procurement, facilitating the correct component selection for electrical installations and maintenance.
In summary, the RH110-C2-BB switch, with its SPST configuration, high current and voltage capacity, and classic black design, is a versatile and reliable choice for a wide range of high-power applications. Its straightforward design and durability make it a popular choice for both functional and aesthetic purposes in various settings.
PACK OF 50 PIECES
The RH110-C5L-BR is a single pole single throw (SPST) switch, designed to handle a current of 16 amperes at 250 volts (16A/250V). This switch features a striking red color, making it easily identifiable and adding a visual cue for safety or function in various applications. It is an ideal choice for applications that require a robust and straightforward on-off switching mechanism.
Key Features and Benefits:
SPST Configuration: The single pole single throw design ensures simple and reliable on-off control. This configuration is widely used in a variety of electrical and electronic devices for straightforward switching operations.
High Current and Voltage Rating (16A/250V): With a rating of 16 amperes at 250 volts, this switch is suitable for handling high power applications. It's ideal for use in both residential and commercial settings, including appliances, lighting, and machinery.
Red Color for Visibility: The red color of the switch not only adds aesthetic value but also serves as a visual indicator for safety or specific functionality, making it easy to identify in a control panel or system.
Durability and Reliability: Built to be robust and reliable, the RH110-C5L-BR can withstand frequent use and is suitable for various demanding applications.
Versatile Use: This switch can be used in a variety of settings, such as in home appliances, office equipment, industrial machinery, and lighting systems that require a durable and high-capacity switch.
Model (RH110-C5L-BR): The specific model number, RH110-C5L-BR, allows for easy identification and procurement, facilitating the correct selection of components for electrical installations and repairs.
In summary, the RH110-C5L-BR switch, with its SPST configuration, high current and voltage capacity, and visible red design, is a versatile and reliable choice for a wide range of high-power applications. Its ease of use and visual distinctiveness make it a popular choice for both functional and safety-oriented applications.
COST PER PIECE
This product is a T10 fluorescent tube, transparent in design and measuring 600mm in length. The T10 designation refers to the tube's diameter, which is approximately 1.25 inches (around 32mm). This size is slightly larger in diameter than the more common T8 tubes.With a length of 600mm (roughly 2 feet), this tube is well-suited for a variety of lighting applications, particularly in spaces where a shorter tube is required. The transparent design ensures maximum light output, providing bright and efficient illumination.T10 fluorescent tubes are known for their energy efficiency and are often used in both commercial and residential settings. They are commonly found in under-cabinet lighting, desk lamps, and smaller overhead fixtures. Their slightly larger diameter compared to T8 tubes can offer a different light distribution and intensity, which can be preferable in certain lighting designs.As with any fluorescent tube, it's important to ensure compatibility with the existing fixture and ballast. These tubes are appreciated for their longevity and consistent light output, making them a practical choice for areas requiring sustained, efficient lighting.
COST PER PIECE
This product is a T8 fluorescent tube, measuring 1200mm in length, with a transparent design. It's a type of lighting commonly used in various settings due to its efficiency and long lifespan.The T8 designation refers to the tube diameter, which is typically 1 inch (approximately 26mm). At 1200mm (roughly 4 feet), this tube is a standard size, making it suitable for a wide range of lighting fixtures used in offices, schools, retail spaces, and other commercial or residential areas.The transparent design of the tube allows for maximum light output, providing bright and consistent illumination. This type of fluorescent tube is known for its energy efficiency and cost-effectiveness, making it a popular choice for long-term lighting solutions in spaces that require continuous illumination.It's important to ensure that the fixture and ballast are compatible with T8 fluorescent tubes for optimal performance. These tubes are favored for their relatively cool operating temperature and good color rendering, making them a practical choice for both task and general ambient lighting in various environments.
PACK OF 100 PIECES
The GSTBGS-002 is a tab connector specifically designed for spade terminals, with dimensions of 6.3mm x 0.8mm. This type of connector is commonly used in various electrical applications for quick and secure connections. The tab connector is typically used to slide onto or into a spade terminal, providing a reliable electrical contact.
Dimensions (6.3x0.8mm): The size of 6.3mm x 0.8mm is a standard dimension for tab connectors, making it compatible with a wide range of spade terminals used in various electrical applications.
Model (GSTBGS-002): The model number GSTBGS-002 accurately identifies the connector's specifications, ensuring proper selection and compatibility in electrical systems where spade terminals are used.
Applications: Commonly used in automotive electrical systems, consumer electronics, industrial machinery, and other applications where quick and reliable connections are needed.
Features: Known for its ease of use, reliability, and secure connection, the GSTBGS-002 tab connector is designed to provide a stable and efficient connection with spade terminals.
Material: These connectors are typically made from conductive materials like brass or copper, often with a coating for corrosion resistance and enhanced conductivity.
In summary, the GSTBGS-002 is a tab connector suitable for 6.3mm x 0.8mm spade terminals, providing a practical and efficient solution for establishing electrical connections in a wide array of applications. Its design focuses on providing a reliable and secure connection, making it a valuable component in various electrical and electronic systems.
PACK OF 50 PIECES
The SKHVBJ model is a tactile switch, designed for applications that require a compact and responsive switching solution. Tactile switches are known for their 'clicky' feedback, which provides users with a clear indication of activation. This type of switch is commonly used in various electronic devices, including keyboards, control panels, and consumer electronics.
Key Features and Benefits:
Tactile Feedback: The switch provides a noticeable tactile response when pressed, confirming to the user that the switch has been activated. This feature is particularly useful in applications where user interface and experience are important.
Compact Size: Tactile switches like the SKHVBJ are typically small and unobtrusive, making them ideal for use in applications where space is limited, such as handheld devices.
Versatility: These switches can be used in a wide range of applications, from consumer electronics like remote controls and mobile devices to more industrial applications like control panels and instrumentation.
Reliability: Tactile switches are designed for durability and can withstand a significant number of actuations, making them a reliable choice for applications that require frequent use.
Model (SKHVBJ): The specific model number allows for easy identification and procurement, ensuring compatibility and ease of integration into various electronic designs and systems.
In summary, the SKHVBJ tactile switch is a versatile and reliable component, suitable for a wide range of applications requiring a compact and responsive switch. Its tactile feedback, small size, and durability make it a popular choice in both consumer and industrial electronic applications.
PACK OF 100 PIECES
The IT1102WG8-160G-G is a tactile switch designed to operate at a current of 50 milliamperes (50mA) and a voltage of 12 volts DC (12VDC). It features a long body with a length of 13.5mm, making it suitable for applications where a larger tactile switch is required for ease of use and accessibility.
Key Features and Benefits:
Current and Voltage Rating (50mA, 12VDC): With its ability to handle up to 50mA at 12VDC, this tactile switch is ideal for low-power applications, commonly found in electronic devices.
Long Body Design (13.5mm): The length of 13.5mm ensures that the switch is easily accessible and operable, which is particularly beneficial in designs where user interaction is frequent.
Tactile Feedback: Provides a noticeable tactile response when pressed, offering a user-friendly interface that confirms activation, which is crucial in user interface design.
Durability: Constructed to be durable and reliable, capable of withstanding frequent use, making it suitable for applications that require a high number of actuation cycles.
Versatile Use: Commonly used in electronic devices such as remote controls, handheld devices, and consumer electronics, where a reliable and easily accessible switch is necessary.
Model (IT1102WG8-160G-G): The specific model number facilitates easy identification and procurement, ensuring the correct component selection for electronic designs and repairs.
In summary, the IT1102WG8-160G-G tactile switch, with its 50mA 12VDC rating and longer 13.5mm body, is a practical and reliable choice for a variety of electronic applications. Its tactile feedback and durability make it especially suitable for user interfaces where ease of use and long-term reliability are key considerations.
PACK OF 500 PIECES
The TKT100M2502BR is a tantalum capacitor with a capacitance value of 10 microfarads (10µF) and a voltage rating of 25 volts. Tantalum capacitors are known for their stability, reliability, and compact size, making them well-suited for a variety of applications in electronic circuits where space is at a premium.
Key Features and Benefits:
10µF Capacitance: This capacitance value is ideal for applications like smoothing, filtering, and decoupling in electronic circuits.
25V Voltage Rating: Suitable for use in circuits with voltage levels up to 25 volts, providing a good margin for a wide range of electronic applications.
Tantalum Construction: Known for their excellent stability, reliability, and temperature performance, tantalum capacitors are often used in applications where these characteristics are critical.
Compact Size: Tantalum capacitors are usually smaller than other types of capacitors with similar ratings, making them ideal for space-constrained applications.
Model (TKT100M2502BR): The specific model number ensures easy identification and procurement, facilitating the correct component selection for electronic designs and repairs.
In summary, the TKT100M2502BR tantalum capacitor, with its 10µF capacitance and 25V voltage rating, is a reliable and stable component suitable for various applications in electronic circuits. Its compact size and excellent performance characteristics make it particularly useful in space-sensitive and critical applications.
PACK OF 500 PIECES
The TKT010M3502BR is a tantalum capacitor with a capacitance value of 1 microfarad (1µF) and a voltage rating of 35 volts. It features a tolerance of ±20% and has a lead pitch of 2.54mm. Packaged in bulk, this capacitor is suitable for a variety of electronic applications, particularly where stability and reliability are essential. Tantalum capacitors are known for their high capacitance density and excellent performance in miniature sizes.
Key Features and Benefits:
1µF Capacitance: Ideal for use in applications requiring a small capacitance value, such as filtering, decoupling, and timing circuits.
35V Voltage Rating: Can be safely used in electronic circuits operating at or below this voltage, providing a good margin for various applications.
±20% Tolerance: Indicates that the actual capacitance can vary within 20% of the nominal value, suitable for general-purpose applications where precise capacitance values are not critical.
2.54mm Lead Pitch: The standard lead pitch makes this capacitor compatible with most breadboards and prototyping PCBs, facilitating easy integration into electronic circuits.
Tantalum Construction: Offers excellent stability, reliability, and temperature performance, making it suitable for applications where these properties are important.
Bulk Packaging: Ideal for large volume use, providing an economical solution for manufacturing and assembly processes.
Model (TKT010M3502BR): The specific model number ensures easy identification and procurement, facilitating the correct component selection for electronic designs and repairs.
In summary, the TKT010M3502BR tantalum capacitor, with its 1µF capacitance, 35V voltage rating, and ±20% tolerance, is a stable and reliable component suitable for a variety of electronic applications. Its standard lead pitch and bulk packaging make it ideal for both prototyping and large-scale electronic production.
PACK OF 1000 PIECES
This series features a capacitance range from 0.1 to 680 microfarads at voltages from 3 to 50 VDC. The plastic case provides a tough barrier coating and maintains precision of lead wire spacing within ±0.015 inch. The gold color epoxy utilized permits Laser marking with outstanding permanency and legibility. All case sizes are printed with capacitance, voltage, polarity and vendor identification. Solid tantalum devices exhibit no degradation failure mode during shelf storage and show a constantly decreasing failure rate (i.e., absence of wearout mechanism) during life tests. The ‘UltraDip II’ Series provides self-insulating cases which are resistant to shock and vibration. These capacitors exhibit low DCL, ESR and Impedance and have excellent temperature stability.Key FeaturesCase Size CPower Dissipation(max) @ 25°C: 0.60 WattsCapacitance/Voltage Range: T350: 0.1-680µF, 3-50 VoltsCapacitance Tolerance: Available in standard EIA nominal values with ±20% and ±10% standardLead Material: T350 Series will be available, as an option, with 100% Matte Tin (RoHS compliant) lead wire or Sn/Pb lead wire.Lead Tape and Reel: Reeling per specification RS-468.
Description
Value
Capacitance
2.2 uF
Capacitance Tolerance
10%
Lead Spacing
2.54 mm
MSL Level
MSL 1 - Unlimited
Operating Temperature Max
125 °C
Operating Temperature Min
-55 °C
Product Diameter
5 mm
Voltage(DC)
35 V
PACK OF 2000 PIECES
The T520 series Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminium electrolytic and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. Suitable for general purpose DC applications up to 12.8V. This series is ideal for DC-to-DC converters, bulk decoupling and hold-up.
Volumetrically efficient
High frequency capacitance retention
100% Accelerated steady state aging
100% Surge current tested
EIA standard case sizes
Halogen-free epoxy
PACK OF 100 PIECES
The TC1185-3.0VCT713 is a 3 V 150 mA CMOS Low Dropout Regulator with Shutdown and VREF Bypass, available in SOT-23-5 package.
It is designed specifically for battery-operated systems, the devices’ CMOS construction eliminates wasted ground current, significantly extending battery life.
Features:
Low Supply Current (50 μA, typical)
Low Dropout Voltage
High Output Voltage Accuracy
Standard or Custom Output Voltages
Power-Saving Shutdown Mode
Reference Bypass Input for Ultra Low-Noise Operation
Overcurrent and Overtemperature Protection
Space-Saving 5-Pin SOT-23 Package
Pin-Compatible Upgrades for Bipolar Regulators
Standard Output Voltage Options:1.8V, 2.5V, 2.6V, 2.7V, 2.8V, 2.85V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0
Applications:
Battery Operated Systems
Portable Computers
Medical Instruments
Instrumentation
Cellular/GSM/PHS Phones
Linear Post-Regulators for SMPS
Pagers
PACK OF 2000 PIECES
The CJ368821100 is a telephone jack designed to accommodate 8 wires, commonly used in telecommunication applications. This type of jack is typically used for telephone connections and networking, where multiple wire configurations are necessary for data and voice transmission.
8-Wire Configuration: The jack is equipped to handle 8 wires, making it suitable for more complex telephone and networking applications that require multiple connections for different signals or lines.
Model (CJ368821100): The model number CJ368821100 precisely identifies the product's specifications, ensuring compatibility and suitability for various telecommunication applications.
Applications: Commonly used in telephone systems, data networks, and communication setups where an 8-wire connection is required. Ideal for environments such as offices, data centers, and residential buildings.
Features: Known for its reliable connections, durability, and compatibility with standard telephone and networking equipment, the CJ368821100 telephone jack is designed to provide a stable and efficient connection for telecommunication needs.
Ease of Installation: The jack is designed for straightforward installation, allowing for quick and secure connections of multiple wires in telephone and data network setups.
In summary, the CJ368821100 telephone jack with an 8-wire configuration is a key component in telecommunication systems, providing reliable and efficient connections for telephone and data networking applications. Its design ensures compatibility with various systems and ease of installation in different environments.
PACK OF 50 PIECES
The DG103-5.08-10P is a terminal block designed for use in a variety of electrical and electronic applications. This terminal block features a pitch of 5.08mm and provides 10 positions (or poles) for connecting wires. It is designed for effective wire-to-board or wire-to-wire connections, providing a secure and reliable way to connect multiple wires in a circuit.
Pitch (5.08mm): The pitch of 5.08mm between each connection point allows for sufficient space to accommodate wires without overcrowding, ensuring ease of installation and maintenance.
Number of Positions (10 Poles): With 10 poles, this terminal block can accommodate multiple wire connections, making it suitable for more complex circuit configurations.
Model (DG103-5.08-10P): The model number DG103-5.08-10P precisely identifies the terminal block's specifications, ensuring the correct application and compatibility in various electrical setups.
Applications: Commonly used in industrial controls, power distribution systems, communication equipment, and other applications where multiple wire connections are needed on a single block.
Features: Known for its multi-pole configuration, ease of use, and secure connections, the DG103-5.08-10P terminal block is designed to provide reliable and efficient wire connections in a range of electrical and electronic applications.
In summary, the DG103-5.08-10P terminal block, with its 5.08mm pitch and 10 poles, is a versatile and practical component for establishing organized and secure electrical connections in various applications, particularly where multiple wire connections are required
PACK OF 50 PIECES
The Model 327/12 is a terminal block connector with a pitch of 14.50mm (approximately 0.571 inches). This type of connector is used for connecting individual electrical wires securely and is commonly found in a wide range of electrical systems and equipment. The 14.50mm pitch refers to the distance between the centers of adjacent terminals, providing ample space for wiring and minimizing the risk of short circuits. This connector is designed to facilitate easy and reliable connections of multiple wires, typically used for power distribution, signal transmission, or grounding applications. The specific model, 327/12, suggests a certain configuration or number of terminals, which could be important for specific applications. Terminal block connectors like this are appreciated for their robustness, ease of installation, and ability to handle a variety of wire sizes, making them a staple in both commercial and industrial electrical installations.
PACK OF 20 PIECES
The TSF2.5-01P-15-01 is a terminal block that comes with an integrated fuse holder. This single-pole terminal block is designed for a voltage rating of 250 volts and a current rating of 6.3 amperes. The incorporation of a fuse holder makes it a versatile component for circuit protection in various electrical applications. It is suitable for use in systems where space-saving and efficient circuit protection are required.
Number of Poles (1 Pole): This terminal block has a single-pole configuration, suitable for applications where individual or isolated connections are needed.
Voltage and Current Rating (250V 6.3A): With a voltage rating of 250 volts and a current rating of 6.3 amperes, this terminal block is suitable for a wide range of medium-voltage and current applications.
Integrated Fuse Holder: The built-in fuse holder adds a layer of protection against overcurrent, enhancing the safety and reliability of the electrical system.
Model (TSF2.5-01P-15-01): The model number TSF2.5-01P-15-01 precisely identifies the terminal block's features, ensuring the correct application in various electrical setups.
Applications: Widely used in industrial controls, power distribution systems, and electrical panels, especially where space efficiency and circuit protection are crucial.
Features: Known for its compact design, integrated fuse holder, and medium voltage and current capacity, the TSF2.5-01P-15-01 terminal block is designed for reliable and efficient electrical connections with added circuit protection.
In summary, the TSF2.5-01P-15-01 terminal block, with its single-pole configuration, integrated fuse holder, and 250V 6.3A rating, is an essential component for establishing safe and efficient electrical connections in various systems, particularly where space-saving circuit protection is required.
PACK OF 50 PIECES
The TS2.5-02P-15-01A is a 2-pole terminal block with a distinctive orange color, designed for electrical connections in various applications. It has a voltage rating of 300 volts and a current rating of 10 amperes, making it suitable for a wide range of medium-voltage and current applications. The terminal block's design facilitates easy and secure wire connections, commonly used in control systems, power distribution, and other electrical installations.
Number of Poles (2 Poles): This terminal block has 2 poles, allowing for the connection of two individual wires, suitable for simple circuit connections.
Voltage and Current Rating (300V 10A): With a voltage rating of 300 volts and a current rating of 10 amperes, the terminal block can handle a range of electrical power requirements, making it versatile for both medium-voltage and medium-current applications.
Color (Orange): The orange color of the terminal block provides clear visual identification, which can be helpful in complex wiring configurations.
Model (TS2.5-02P-15-01A): The model number TS2.5-02P-15-01A accurately specifies the terminal block's characteristics, ensuring the correct application and compatibility in various electrical systems.
Applications: Widely used in industrial controls, power supply units, electrical panels, and other areas where reliable and organized wire-to-board connections are needed.
Features: Known for its compact design, medium voltage and current capacity, and ease of use, the TS2.5-02P-15-01A terminal block is designed for reliable and efficient electrical connections in a variety of settings.
In summary, the TS2.5-02P-15-01A terminal block, with its 2 poles, orange color, and 300V 10A capacity, is a key component for establishing secure and efficient electrical connections in a range of electronic systems and applications.
PACK OF 50 PIECES
The TSB2.5-02P-15-01 is a 2-pole terminal block with an orange color, designed for electrical connections in various applications. It features a high voltage rating of 600 volts and a current rating of 20 amperes, making it suitable for high-voltage and high-current applications. The terminal block's design allows for easy and secure wire connections and is commonly used in control systems, power distribution, and other electrical installations that require higher power handling.
Number of Poles (2 Poles): This terminal block has 2 poles, which allows for the connection of two individual wires, making it suitable for simple circuit connections.
Voltage and Current Rating (600V 20A): With a high voltage rating of 600 volts and a current rating of 20 amperes, this terminal block is capable of handling higher power requirements, making it versatile for a wide range of applications.
Color (Orange): The orange color of the terminal block provides clear visual identification, which can be beneficial in complex wiring configurations for easy identification and maintenance.
Model (TSB2.5-02P-15-01): The model number TSB2.5-02P-15-01 accurately specifies the terminal block's characteristics, ensuring the correct application and compatibility in various electrical systems.
Applications: Often used in industrial controls, power supply units, electrical panels, and other areas where robust and organized wire-to-board connections are required for higher voltage and current.
Features: Known for its compact design, high voltage and current capacity, and ease of use, the TSB2.5-02P-15-01 terminal block is designed for efficient and reliable electrical connections in demanding settings.
In summary, the TSB2.5-02P-15-01 terminal block, with its 2 poles, orange color, and 600V 20A capacity, is an essential component for establishing secure and robust electrical connections in high-power electronic systems and applications.
PACK OF 100 PIECES
The G500A-5.08-16P-1 is a terminal block from the G500A series, featuring a 5.08mm pitch and 16 connection positions. This type of terminal block is commonly used for connecting and organizing multiple wires in electrical and electronic circuits, offering a reliable and efficient method for wire management.
Key Features and Benefits:
5.08mm Pitch: The pitch of 5.08mm between terminals allows for compact yet comfortable spacing for wiring, suitable for both high-density applications and ease of access.
16 Positions: With 16 connection points, this terminal block can accommodate multiple wires, making it ideal for complex circuits or systems that require numerous connections.
Ease of Installation: Designed for straightforward installation, the terminal block facilitates easy wire insertion and secure fastening, simplifying the assembly process.
Organized Wire Management: It provides an organized approach to handling multiple wire connections, which is essential for maintaining circuit clarity and integrity, especially in complex systems.
Versatile Applications: Commonly used in a range of applications including electrical control panels, machinery, electronic devices, and power distribution systems.
Model (G500A-5.08-16P-1): The specific model number ensures easy identification and procurement, allowing for accurate selection in electrical installations, repairs, or upgrades.
In summary, the G500A-5.08-16P-1 terminal block is a practical and efficient solution for managing multiple wire connections in various electrical and electronic applications. Its compact design with a 5.08mm pitch and 16 connection positions makes it suitable for a wide range of uses where organized and reliable wire connections are essential.
PACK OF 50 PIECES
Introducing the Terminal Connector 18 Poles, model DG45C-B18P-13-00, a robust and versatile connector designed for a wide range of electrical and electronic applications. This multi-pole connector is engineered to offer reliable connectivity in complex circuits, making it an ideal choice for both industrial and consumer applications.
Key Features:
18-Pole Configuration: Offers 18 connection points, making it suitable for applications requiring multiple electrical connections in a compact space.
High-Quality Construction: Made with durable materials, ensuring long-term reliability and stability in various environments.
Ease of Installation: Designed for straightforward and efficient installation, simplifying the assembly process in both prototyping and production environments.
Secure Connections: Ensures stable and secure electrical connections, crucial for the safety and reliability of the application.
Compact Design: Its space-efficient design is ideal for use in environments where space is at a premium.
Versatility: Suitable for a variety of applications, including control panels, machinery, automotive systems, and electronic devices.
Model Number: DG45C-B18P-13-00, indicating specific design and performance characteristics.
Applications:
Industrial control systems.
Electrical panels and distribution boards.
Machinery and equipment wiring.
Automotive electronics.
Consumer electronics and home appliances.
Telecommunications equipment.
The Terminal Connector 18 Poles, model DG45C-B18P-13-00, is a high-capacity and reliable solution for ensuring secure electrical connections in a wide array of applications. Its robust design and ease of use make it a preferred choice for professionals seeking efficient and durable connection solutions.
PACK OF 200 PIECES
The TG169 is a thermal cutoff fuse designed to provide reliable over-temperature protection. It is rated for a current of 15 amperes at 250 volts (15A/250V) and activates at a temperature of 169 degrees Celsius (169°C). This thermal cutoff is essential for safety in various electrical and electronic applications, preventing overheating by interrupting the current flow when the temperature exceeds the specified limit.
Key Features and Benefits:
High Temperature Activation (169°C): Designed to activate and cut off the electrical circuit at 169°C, providing protection against overheating and potential fire hazards.
Current and Voltage Rating (15A/250V): Suitable for handling up to 15 amperes at 250 volts, making it compatible with a wide range of household and commercial electrical devices.
Over-Temperature Protection: Offers a critical safety feature for electrical appliances and equipment, preventing damage due to excessive heat.
Broad Application Range: Ideal for use in a variety of applications, including HVAC systems, motors, battery packs, power supplies, and other electrical equipment that requires thermal protection.
Compact and Reliable Design: The small size allows for easy integration into electrical circuits without requiring significant space, while its design ensures reliability and consistent performance.
Model (TG169): The specific model number facilitates easy identification and procurement, ensuring the correct component selection for safety and maintenance in electrical systems.
In summary, the TG169 thermal cutoff is a crucial safety component designed to provide over-temperature protection in electrical and electronic systems. Its 15A/250V rating and activation temperature of 169°C make it suitable for a wide range of applications where preventing overheating is critical to ensuring safety and preventing equipment damage.
PACK OF 100 PIECES
The S1042-1 is a thermal fuse with a current rating of 5 amperes (Amps) and a temperature rating of 130 degrees Celsius (°C). Thermal fuses are designed to provide over-temperature protection by permanently interrupting the electrical circuit when the temperature exceeds the specified threshold. This type of fuse is critical in preventing overheating and potential hazards in electrical and electronic devices.
Current Rating (5Amps): The 5 Amp rating indicates the maximum current the fuse can handle under normal operating conditions, making it suitable for a variety of low to moderate current applications.
Temperature Rating (130°C): This fuse is designed to operate up to a temperature of 130°C. If this temperature is exceeded, the fuse will irreversibly open the circuit, providing a crucial safety mechanism against overheating.
Model (S1042-1): The model number S1042-1 accurately specifies the fuse's characteristics, ensuring the correct application and compatibility in devices that require thermal protection.
Applications: Thermal fuses like the S1042-1 are commonly used in a wide range of applications including household appliances (like coffee makers, hair dryers), power supplies, and other electronic devices where temperature control is essential for safety.
Features: Known for its precise temperature rating and reliable operation, the S1042-1 thermal fuse is designed to provide effective over-temperature protection, thereby enhancing the safety and reliability of the electronic and electrical devices.
In summary, the S1042-1 thermal fuse is a crucial safety component in electrical and electronic systems, offering effective protection against overheating by permanently interrupting the circuit at a specific temperature threshold. With its 5Amp current rating and 130°C temperature rating, it is suitable for a variety of applications where temperature-induced hazard prevention is essential.
The Bond-Ply 100, model BP105-54, is a thermal interface material specifically designed for use with TO-220 type components. This product is typically used to enhance thermal conduction between heat-producing electronic components, such as transistors or voltage regulators in TO-220 packages, and heat sinks or other cooling devices.
Key Features and Benefits:
Designed for TO-220 Components: The Bond-Ply 100 is tailor-made to fit TO-220 package components, ensuring optimal thermal contact and enhanced heat transfer efficiency.
High Thermal Conductivity: This material efficiently conducts heat away from electronic components, helping to maintain optimal operating temperatures and improve reliability and lifespan.
Easy Application: The BP105-54 is designed for ease of application, typically coming in a pre-cut form that aligns perfectly with TO-220 components, facilitating quick and hassle-free installation.
Electrical Isolation: In addition to thermal conductivity, it often provides electrical isolation, which is crucial for preventing electrical shorts and protecting sensitive electronic components.
Durable and Reliable: Made from high-quality materials, Bond-Ply 100 is built to withstand the demanding conditions of electronic environments, ensuring long-term durability and performance.
Model (BP105-54): The specific model number helps in easy identification and procurement, ensuring the correct material selection for thermal management in electronic assemblies.
In summary, the Bond-Ply 100, model BP105-54, is a specialized thermal interface material designed for effective heat transfer and management in electronic components using TO-220 packages. Its high thermal conductivity, ease of application, and electrical isolation properties make it an essential component in maintaining the performance and reliability of electronic devices.
PACK OF 1000 PIECES
The BT-220 is a bushing designed for use with components in the TO-220 package. It is specifically tailored to fit the size and shape of TO-220 components, which are commonly used in a variety of electronic devices. The BT-220 bushing is used to insulate and protect the leads of TO-220 package components when they pass through a surface or are mounted to a heatsink or chassis.
Compatibility with TO-220 Package: The bushing is designed to be compatible with the TO-220 package, a widely used form factor for semiconductor devices such as transistors, voltage regulators, and integrated circuits.
Insulation and Protection: The primary function of the BT-220 bushing is to provide electrical insulation and physical protection for the leads of TO-220 components, helping to prevent short circuits and physical damage.
Model (BT-220): The model number BT-220 accurately identifies the bushing's specifications and compatibility, ensuring the correct application with TO-220 package components.
Applications: Commonly used in electronic devices where TO-220 package components are employed, including power supplies, amplifiers, and various types of consumer electronics.
Features: Known for its precise fit for TO-220 components, the BT-220 bushing provides effective insulation and protection, ensuring the reliable and safe operation of electronic devices.
In summary, the BT-220 bushing is an essential component for use with TO-220 package electronic components, providing necessary insulation and protection to maintain the integrity and safety of electronic devices.
PACK OF 2000 PIECES
The described component is a toroid core with an initial permeability (Al value) of 2090, coated with Parylene, and dimensions of 7.62x3.18x4.8 millimeters. Toroid cores are commonly used in electronic circuits for inductors and transformers.
Al Value (2090): The initial permeability (Al value) of 2090 indicates the magnetic permeability of the core material, which is a measure of the material’s ability to conduct magnetic flux. A higher Al value suggests that the core can support a higher magnetic field with less winding turns.
Parylene Coating: Parylene is a polymer used for coating electronic components, providing a protective layer that is chemically and mechanically stable. It offers excellent moisture, chemical, and dielectric barrier properties, making it suitable for enhancing the durability and performance of the core in harsh environments.
Dimensions (7.62x3.18x4.8mm): The dimensions specify the size of the toroid core. In this case, the toroid has an outer diameter of 7.62mm, an inner diameter of 3.18mm, and a height of 4.8mm. The size of the core affects its inductance and current handling capabilities.
Applications: Toroid cores like this are used in a variety of applications, including power supply transformers, inductors in electronic circuits, and noise suppression components. They are preferred for their efficiency in magnetic field containment and minimal electromagnetic interference.
Features: Toroid cores offer high inductance per turn, efficient energy use, and reduced electromagnetic interference compared to other core shapes. The Parylene coating enhances environmental protection and electrical insulation.
The P4T7.62X3.18X4.8 toroid core, with its specific Al value, Parylene coating, and compact dimensions, is a suitable choice for electronic applications requiring efficient and stable inductance with minimal interference and enhanced durability.
PACK OF 1000 PIECES
The A121T7.62X3.18X4 is a toroid core characterized by its dimensions: an outer diameter of 7.62mm, an inner diameter of 3.18mm, and a height of 4.8mm. Toroid cores are commonly used in electronic circuits for applications such as inductors and transformers.
Dimensions:
Outer Diameter (7.62mm): The outer diameter of the toroid is 7.62mm.
Inner Diameter (3.18mm): The inner diameter is 3.18mm.
Height (4.8mm): The height or thickness of the toroid is 4.8mm.
Toroid Core Usage: Toroid cores are widely used in electronic circuits for constructing inductors, transformers, and other magnetic components. They are preferred for their high efficiency and minimal electromagnetic interference.
Applications: These cores are ideal for compact power supplies, electronic filters, and radio frequency (RF) devices. They are also used in noise reduction circuits and for energy storage in power electronics.
Material: While the specific material composition is not indicated in the description, toroid cores can be made from various magnetic materials, including ferrite, iron powder, or amorphous metals, each offering different magnetic properties suitable for specific applications.
Features: Toroid cores are known for their high inductance per turn, efficient containment of the magnetic field within the core, and reduced electromagnetic interference (EMI) compared to other core shapes.
The A121T7.62X3.18X4 toroid core, with its specific dimensions, is suitable for a range of electronic applications where compact and efficient magnetic components are required. The choice of material (not specified here) would further define its suitability for specific applications, particularly in terms of frequency response and power handling.
PACK OF 500 PIECES
The T12.7X7.92X6.35C is a toroid core made of material P4, with dimensions of 12.7mm in outer diameter, 7.92mm in inner diameter, and a height of 6.35mm. Toroid cores are used in a variety of electronic applications, primarily for inductors and transformers.
Material (P4): The designation 'P4' refers to the specific material composition of the toroid core. The properties of this material, such as permeability, saturation, and frequency response, determine its suitability for different applications. P4 material is typically used for its magnetic properties that are well-suited to certain frequencies and power levels.
Dimensions:
Outer Diameter (12.7mm): The outer diameter of the toroid is 12.7mm.
Inner Diameter (7.92mm): The inner diameter is 7.92mm.
Height (6.35mm): The height or thickness of the toroid is 6.35mm.
Applications: Toroid cores made of P4 material are commonly used in making inductors and transformers in power supplies, RF circuits, and other electronic devices. They are preferred in applications where efficiency and minimal electromagnetic interference are crucial.
Efficiency and EMI Reduction: Toroid cores are efficient in containing the magnetic field within the core material, which minimizes electromagnetic interference (EMI). This makes them ideal for use in close proximity to sensitive electronic circuits.
Usage: These cores are particularly effective in high-frequency applications, where their shape and material properties help to maintain inductance with minimal losses.
The T12.7X7.92X6.35C toroid core, with its P4 material and specific dimensions, is suitable for a wide range of applications where efficient magnetic performance and minimal interference are required. The choice of the P4 material suggests it is tailored for applications where its particular magnetic properties are advantageous, such as in RF applications or power electronics.
COST PER PIECE
The P4T25X15X10C is a toroid core made of P4 material, featuring dimensions of 25mm in outer diameter, 15mm in inner diameter, and a height of 10mm. Toroid cores of this type are commonly used in various electronic applications, particularly for constructing inductors and transformers.
Material (P4): The P4 material designation refers to the specific magnetic properties of the toroid core. This material is selected for its permeability, saturation, and frequency response characteristics, which are suitable for certain types of electronic applications.
Dimensions:
Outer Diameter (25mm): The outer diameter of the toroid is 25mm, indicating its overall size.
Inner Diameter (15mm): The inner diameter is 15mm, which is the size of the central opening of the toroid.
Height (10mm): The height or thickness of the toroid is 10mm.
Applications: Toroid cores made of P4 material are typically used in the construction of inductors and transformers in applications such as power supplies, RF circuits, and other electronic devices where efficiency and minimal electromagnetic interference (EMI) are important.
Efficiency and EMI Reduction: Toroid cores are known for their efficiency in containing the magnetic field within the core, which helps to reduce EMI. This feature is particularly beneficial in applications where the core is used near sensitive electronic components.
Usage: The shape and material properties of toroid cores make them effective for use in high-frequency applications, where they help to maintain inductance with minimal losses.
The P4T25X15X10C toroid core, with its P4 material and specified dimensions, is well-suited for applications requiring efficient magnetic performance and low interference. The selection of P4 material suggests that it is optimized for specific applications, potentially including RF applications or power electronics, where its magnetic properties provide an advantage.
PACK OF 1000 PIECES
The P4T9.53X4.75X3.2 is a toroid core made from P4 material, with dimensions of 9.53mm in outer diameter, 4.75mm in inner diameter, and a height of 3.2mm. Toroid cores of this kind are frequently utilized in various electronic applications, especially in the construction of inductors and transformers.
Material (P4): The 'P4' material designation refers to the specific magnetic properties of the toroid core. This material is typically chosen for its permeability and saturation characteristics, suited to specific electronic applications.
Dimensions:
Outer Diameter (9.53mm): The outer diameter of the toroid is 9.53mm, which indicates its overall size.
Inner Diameter (4.75mm): The inner diameter is 4.75mm, specifying the size of the central hole of the toroid.
Height (3.2mm): The height or thickness of the toroid is 3.2mm.
Applications: Toroid cores made from P4 material are often used in making inductors and transformers for applications such as power supplies, RF (Radio Frequency) circuits, and other electronic devices where efficient magnetic performance and minimal electromagnetic interference (EMI) are critical.
Efficiency and EMI Reduction: Due to their design, toroid cores are efficient at containing the magnetic field within the core material, which helps to minimize EMI. This is particularly advantageous in scenarios where the core is placed in proximity to sensitive electronic circuits.
Usage: The specific shape and material properties of these toroid cores make them suitable for high-frequency applications, aiding in maintaining inductance with minimal energy losses.
The P4T9.53X4.75X3.2 toroid core, with its P4 material and precise dimensions, is ideal for applications requiring efficient magnetic performance and reduced interference. The use of P4 material indicates its suitability for specific requirements, possibly including RF applications or power electronics, where its magnetic characteristics are beneficial.
![Tantalum Polymer Capacitor, KO-CAP®, 10 µF, ± 20%, 10 V, A, 0.08 ohm, 1206 [3216 Metric]](//electronicaseta.mx/cdn/shop/files/T520A106M010AT.jpg?crop=center&height=645&v=1703985765&width=465)
![Tantalum Polymer Capacitor, KO-CAP®, 10 µF, ± 20%, 10 V, A, 0.08 ohm, 1206 [3216 Metric]](http://electronicaseta.mx/cdn/shop/files/T520A106M010AT.jpg?crop=center&height=645&v=1703985765&width=465)
